Printer Specific Parts

Printer Specific Parts

Use the filter box below to narrow down the parts you are looking for:

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • MakerGear 12v Extruder Fan 40x10mm for M2

    40x10mm 12v Fan - M2 | MakerGear

    MakerGear OEM

    $15.00
    MakerGear M2 Extruder Fan - 40x10mm, 12 volt  This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against incorrect plug-in. All...
    $15.00
    Qty in Cart: 0
    Quantity:
    Price:
    $15.00
    Subtotal:
  • MakerGear Extruder Fan 40x10mm

    40x10mm 24v Extruder Fan | MakerGear

    MakerGear OEM

    $15.00
    Replacement Extruder Fan 40x10mm, 24 volt for your MakerGear M3/M2* 3D printer This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against...
    $15.00
    Qty in Cart: 0
    Quantity:
    Price:
    $15.00
    Subtotal:
  • MakerGear bed fan

    40x15mm 24v M3 Bed Fan | MakerGear

    MakerGear OEM

    $15.00
    24-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in. All fans should be kept free of dust buildup to prevent failure.     
    $15.00
    Qty in Cart: 0
    Quantity:
    Price:
    $15.00
    Subtotal:
  • MakerGear 12 Volt Extruder Fan 50x50x10

    50x10mm 12v M2 Extruder Fan | MakerGear

    MakerGear OEM

    $15.00
    M2 Extruder Fan - 50x50x10mm, 12 volt  Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50mm fan provides users with greater control over the cooling rate of extruded filament material. This fan has a keyed...
    $15.00
    Qty in Cart: 0
    Quantity:
    Price:
    $15.00
    Subtotal:
  • Fan for MakerGear M2 Dual

    50x10mm 24v M2 Dual Extruder Fan | MakerGear

    MakerGear OEM

    $15.00
    MakerGear M2 Dual Extruder Fan 50x10mm - 24v  This fan has longer leads to accommodate the M2 Dual 3D Printer Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm fan provides users with greater control over...
    $15.00
    Qty in Cart: 0
    Quantity:
    Price:
    $15.00
    Subtotal:
  • MakerGear Extruder Fan 50x50x10 12 Volt

    50x10mm 24v M2 Extruder Fan | MakerGear

    MakerGear OEM

    $15.00
    M2 Replacement Extruder Fan - 50x50x10mm, 24 volt Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm fan provides users with greater control over the cooling rate of extruded filament material. This fan has a...
    $15.00
    Qty in Cart: 0
    Quantity:
    Price:
    $15.00
    Subtotal:
  • MakerGear OEM 8x10 Glass Build Surface

    8x10 Glass Build Surface | MakerGear

    MakerGear OEM

    $26.00
    8x10 Build Surface from MakerGear Made from borosilicate glass, this 8" x 10" x 0.13" (20 cm x 25 cm x 3.3 mm) build plate provides a perfect print surface when properly coated in a film of polyimide tape, GeckoTek or BuildTak. For use with the...
    $26.00
    Qty in Cart: 0
    Quantity:
    Price:
    $26.00
    Subtotal:
  • MakerGear M3 Motor Mount

    Aluminum Motor Mount for M3 | MakerGear

    MakerGear OEM

    $29.95
    Aluminum Motor Mount.   This is the extruder motor mount that comes standard on the M3ID and M3SE Rev.1 machines M3x22 bolts included  
    $29.95
    Qty in Cart: 0
    Quantity:
    Price:
    $29.95
    Subtotal:
  • MakerGear M3 Bed Heater

    Bed Heater | MakerGear

    MakerGear OEM

    $30.00
    Replacement Bed Heater for MakerGear M2 & M3  Silicone bed heater, includes header plug. Fits: MakerGear M2 (24v) MakerGear M3
    $30.00
    Qty in Cart: 0
    Quantity:
    Price:
    $30.00
    Subtotal:
  • Bed Thermistor M2 and M3 MakerGear 3D printers

    Bed Thermistor | MakerGear

    MakerGear OEM

    $25.00
    MakerGear Bed Thermistor Replacement OEM thermistor for MakerGear 3D printers Fits: MakerGear M2 and M3 printers (includes connector)
    $25.00
    Qty in Cart: 0
    Quantity:
    Price:
    $25.00
    Subtotal:
  • MakerGear replacement drive gear

    Drive Gear | MakerGear

    MakerGear OEM

    $20.00
      MakerGear Drive Gear Replacement Fits: M2 & M3
    $20.00
    Qty in Cart: 0
    Quantity:
    Price:
    $20.00
    Subtotal:
  • MakerGear M3ID Extruder Wiring Harness

    Extruder Harness (right extruder) M3-ID Rev.1 | MakerGear

    MakerGear OEM

    $49.95
    MakerGear Extruder Wiring Harness For EXT-1 (Right Extruder) Compatible with current version MakerGear M3-ID Rev.1 with BLTouch bed leveling probe. Also compatible with the MakerGear Rev.0 if you have upgraded to the BLtouch bed leveling probe, but you...
    $49.95
    Qty in Cart: 0
    Quantity:
    Price:
    $49.95
    Subtotal:
  • MakerGear Extruder Motor with Gear

    Extruder Motor - Base | MakerGear

    MakerGear OEM

    $24.95
    Extruder Stepper Motor for MakerGear 3D printers Includes: 1.8° stepper motor base Pinion gear (installed) Fits: M2 M3 Note: Does not include the 5.16:1 planetary gearbox. Click here if you need the stepper motor with...
    $24.95
    Qty in Cart: 0
    Quantity:
    Price:
    $24.95
    Subtotal:
  • MakerGear M3 R1 Extruder Mounting Plate

    Extruder Plate for M3-ID Rev.1 Left Hand | MakerGear

    MakerGear OEM

    $39.95
    Left Hand Extruder Mounting Plate for MakerGear M3ID Rev. 1 This mounting plate has the cutout for the BLTouch. Fits: M3ID R.1 (left) M3-SE R.1
    $39.95
    Qty in Cart: 0
    Quantity:
    Price:
    $39.95
    Subtotal:
  • Fiberglass insulation  for MakerGear 3D printer V4 Hotend

    Fiberglass Insulation for V4 Hot End | MakerGear

    MakerGear OEM

    $2.99
    Fiberglass Insulation for your MakerGear Hot End Insulation maintains your hot end's temperature and prevents potential burn injuries Expandable and rubber-coated Suitable for both the V4 and V3b Hot Ends *Individually sold fiberglass...
    $2.99
    Qty in Cart: 0
    Quantity:
    Price:
    $2.99
    Subtotal:
  • Total: items /

Adding your products to cart