Printer Specific Parts

Printer Specific Parts

Use the filter box below to narrow down the parts you are looking for:

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Fan Guard 40x40mm

    40mm Metal Fan Guard

    PB Select

    $1.99
    Metal Fan Guard Fits: 40x40mm fans Mounting screws not included
    $1.99
    Qty in Cart: 0
    Quantity:
    Price:
    $1.99
    Subtotal:
  • MakerGear Extruder Fan 40x10mm

    40x10mm MakerGear M3 Extruder Fan

    PB Select

    Regular Price: $15.00
    $12.95
    Replacement Extruder Fan 40x10mm, 24 volt for your MakerGear M2/M3 3D printer This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against...
    Regular Price: $15.00
    $12.95
    Qty in Cart: 0
    Price:
    Regular Price: $15.00
    $12.95
    Subtotal:
  • MakerGear bed fan

    40x15mm MakerGear M3 Bed Fan

    PB Select

    Regular Price: $15.00
    $12.95
    24-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in.  Fits: All MakerGear M3s    
    Regular Price: $15.00
    $12.95
    Qty in Cart: 0
    Quantity:
    Price:
    Regular Price: $15.00
    $12.95
    Subtotal:
  • Robo R1/+ bed magnets - 6MM

    6mm Bed Magnets (4 Pack) - R1+ | Robo 3D

    PB Select

    $2.95
    6mm Bed Magnets for R1+ Glass Bed Please note: These magnets are 6mm thick, they work with the latest v2.5 R1 bed, which requires 6mm magnets. Apply using this epoxy and these clamps for best results. Sold in pack of 4  Fits: R1+ 
    $2.95
    Qty in Cart: 0
    Quantity:
    Price:
    $2.95
    Subtotal:
  • Bolts for mounting Flashforge Bed Heater

    Bed Heater Hardware | Flashforge

    PB Select

    $2.99
    Bed Heater Mounting Hardware This hardware set is for mounting the PCB bed heater to the build plate on the below listed Flashforge 3D printers. Includes: 5 Bolts 5 Nuts Fits: Creator Pro Creator Pro 2 Creator Max Creator Max...
    $2.99
    Qty in Cart: 0
    Quantity:
    Price:
    $2.99
    Subtotal:
  • Bed Spacers for Prusa MINI+

    Bed Spacer for MK2, MK2S, MINI, MINI+ | 2 Pack

    PB Select

    $2.99
    Spacer for Heated Bed Includes: Stainless Steel Bed Spacer (2 pcs) Fits: MK2 MK2S Mini Mini+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.
    $2.99
    Qty in Cart: 0
    Quantity:
    Price:
    $2.99
    Subtotal:
  • Bed Standoff for Prusa MK3

    Bed Spacer for MK3, MK3S, MK3S+ | 2 pack

    PB Select

    $3.49
    Heated Bed Spacer Includes: Stainless Steel Bed Spacer (2 pcs) Fits: MK3 MK3S MK3S+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.
    $3.49
    Qty in Cart: 0
    Quantity:
    Price:
    $3.49
    Subtotal:
  • Boron Nitride Thermal Paste 3cc

    Boron Nitride Thermal Paste

    PB Select

    $6.95 - $16.95
    Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. This is the best Boron Nitride paste we could find! Contains high quality ZYP™ Boron Nitride and proprietary binders which...
    $6.95 - $16.95
    Qty in Cart: 0
    Price:
    $6.95 - $16.95
    Subtotal:
  • 4 pack 3.5 inch clamp

    Clamp for R1 Bed Magnet Installation - 4 Pack

    PB Select

    $6.95
    Robo R1/+ Bed Installation Clamps Small clamps to assist with the installation of bed magnets on the R1+ bed. These are 4 inch clamps with an opening of about 2 inches. Set of 4 clamps
    $6.95
    Qty in Cart: 0
    Quantity:
    Price:
    $6.95
    Subtotal:
  • On Sale
    Copper Heatbreak

    Copper Bimetal Heat Break For RepRap V6 Hotends

    PB Select

    Now: $19.95
    Regular Price: $29.95
    Bimetal Copper V6 Heat Break This bimetal heat break is comprised of copper and stainless steel. The thin stainless steel tube used as the break, reduces heat transfer to the cold end. While the copper on both the hotend and cold end increase...
    Now: $19.95
    Regular Price: $29.95
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $19.95
    Regular Price: $29.95
    Subtotal:
  • V6 Copper Heater block

    Copper Heater Block - RepRap V6

    PB Select

    $19.95
    Copper Heater Block Includes:  Copper heater block (1 pcs) Setscrew for thermistor (1 pcs) Clamping screw for heater (1 pcs) Fits: E3D V6 Hotends RepRap Hotends Prusa i3 series
    $19.95
    Qty in Cart: 0
    Quantity:
    Price:
    $19.95
    Subtotal:
  • Copper Nozzle for Prusa

    Copper Nozzle - RepRap V6 - 0.40mm

    PB Select

    $21.95
    RepRap Plated Copper Nozzle Includes: 0.40mm Nozzle (1 pcs) These high precision copper nozzles are great for printing everything from PLA to PEEK. they have a much higher thermal conductivity than brass and can handle high...
    $21.95
    Qty in Cart: 0
    Quantity:
    Price:
    $21.95
    Subtotal:
  • Copper Nozzle - E3D type

    Copper Nozzle - RepRap V6 - 0.60mm

    PB Select

    $21.95
    RepRap Plated Copper Nozzle Includes: 0.60mm Nozzle (1 pcs) These high precision copper nozzles are great for printing everything from PLA to PEEK. they have a much higher thermal conductivity than brass and can handle high...
    $21.95
    Qty in Cart: 0
    Quantity:
    Price:
    $21.95
    Subtotal:
  • CR10-S Pro Nozzle

    CR-10S Pro Brass Nozzle | 0.20mm

    PB Select

    $9.95
    Brass Nozzle for CR10S Pro Size: 0.20mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 
    $9.95
    Qty in Cart: 0
    Quantity:
    Price:
    $9.95
    Subtotal:
  • CR10-S Pro Nozzle

    CR-10S Pro Brass Nozzle | 0.40mm

    PB Select

    $8.95
    Brass Nozzle for CR10S Pro Size: 0.40mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 
    $8.95
    Qty in Cart: 0
    Quantity:
    Price:
    $8.95
    Subtotal:
  • CR10-S Pro Nozzle

    CR-10S Pro Brass Nozzle | 0.60mm

    PB Select

    $8.95
    Brass Nozzle for CR10S Pro Size: 0.60mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 
    $8.95
    Qty in Cart: 0
    Quantity:
    Price:
    $8.95
    Subtotal:
  • CR10-S Pro Nozzle

    CR-10S Pro Brass Nozzle | 0.80mm

    PB Select

    $8.95
    Brass Nozzle for CR10S Pro Size: 0.80mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 
    $8.95
    Qty in Cart: 0
    Quantity:
    Price:
    $8.95
    Subtotal:
  • Extruder Hardware It for Robo R1+

    Extruder Hardware Kit - R1+ | Robo 3D

    PB Select

    $6.95
    R1+ Extruder Hardware Kit  This includes the screws, nuts, bolts, and springs needed for your R1+ extruder. Please Note: Does not include hobbed bolt, Axle Shaft or Idler bearing. These will need to be purchased separately. Fits: R1+
    $6.95
    Qty in Cart: 0
    Quantity:
    Price:
    $6.95
    Subtotal:
  • Total: items /

Adding your products to cart