Revo Six Prusa Edition with Fully Loaded Nozzle Kit - 24 Volt - MK3/S/+ | E3D

Revo™ Six Prusa Edition - with Fully Loaded Nozzle Kit - For MK3/S/+

The Revo Six Prusa Edition has shorter wires, a Prusa specific connector on the thermistor and does not include the fan or fan duct. 

Firmware Note: The recommended firmware for use with Revo HotEnds is version 3.11.0. If you are using a later version firmware, we recommend loading version 3.11.0.

Voltage:  24 volt 

Nozzle Size:  0.40mm 

Includes:
Revo Six heatsink (1 pcs)
24 volt Revo heater core (1 pcs)
Revo thermistor - blue wire (1 pcs)
Spring (1 pcs)
Extension cable kit - Prusa specific (1 pcs)
100mm PTFE tube (1 pcs)
0.25 brass Revo nozzle (1 pcs)
0.40 brass Revo nozzle (1 pcs)
0.60 brass Revo nozzle (1 pcs)
0.80 brass Revo nozzle (1 pcs)

Notes:
1. You may need to adjust your Z offset when changing nozzles.
2. Fan and fan duct are not included. You will reuse your existing fan for this install. 
3. This is a 24 volt version and only compatible with the 24 volt Prusa Printers (MK3, MK3S, MK3S+). 

Key Features:
Max temp: 300°C 
Filament diameter: 1.75mm  
Groove mount 
Voltage: 24V 
Power: 40W

Links to More Information (these links will take you to E3D's site)
Revo Six Nozzle changing guide
Revo Six Prusa (MK3/S/+) upgrade guide
Revo Six Assembly Guide
Revo Six Data Sheet
Revo Six Max Temperature Guide
Revo Six Reference CAD
Marlin 2.0 firmware guide (Revo Six)
Revo Six RepRap Firmware Guide