Revo Six Prusa Edition with Single Nozzle - 24 Volt - MK3/S/+ | E3D

Revo™ Six Prusa Edition - with Single Nozzle - For Mk3/S/+

The Revo Six Prusa Edition has shorter wires, a Prusa specific connector on the thermistor and does not include the fan or fan duct. 

Firmware Note: The recommended firmware for use with Revo HotEnds is version 3.11.0. If you are using a later version firmware, we recommend loading version 3.11.0.

Voltage:  24 volt 

Nozzle Size:  0.40mm 

Includes:
Revo Six heatsink (1 pcs)
24 volt Revo heater core (1 pcs)
Revo thermistor - blue wire (1 pcs)
Spring (1 pcs)
Extension cable kit - Prusa specific (1 pcs)
100mm PTFE tube (1 pcs)
0.40 brass Revo nozzle (1 pcs)

Notes:
- You may need to adjust your Z offset when changing nozzles.
- Fan and fan duct are not included. You will reuse your existing fan for this install. 
- This is a 24 volt version and only compatible with the 24 volt Prusa Printers (MK3, MK3S, MK3S+). 

Key Features:
Max temp: 300°C 
Filament diameter: 1.75mm  
Groove mount 
Voltage: 24V 
Power: 40W

Links to More Information (these links will take you to E3D's site)
Revo Six Nozzle changing guide
Revo Six Prusa (MK3/S/+) upgrade guide
Revo Six Assembly Guide
Revo Six Data Sheet
Revo Six Max Temperature Guide
Revo Six Reference CAD
Marlin 2.0 firmware guide (Revo Six)
Revo Six RepRap Firmware Guide