Robo

Hotend Cable Guide for R1 Guides the hotend heater and thermistor cable When installing, rotate your hotend 90 degrees so the wires face the front of the printer. Designed by: Bob R.  

Robo R2 and C2 Hotend Clamping Screw 12.9 grade M3 socket head cap screws used to secure the hotend to the aluminum mounting plate. Use caution when installing your hotend, over-tightening will cause stripping of the threads in the aluminum mounting...

  3010 Heatsink Cooling Fan This fan cools the heatsink on the coldside of the nozzle assembly.  Includes: Fan (1 pcs) Size: 30x30x10mm Fits:Adventurer 5MAdventurer 5M ProRobo E4

 Used Item  May have minor scuffs or scratches.  Hotend Cover Plate  Robo logo in red lettering Fits: R2 and C2

Robo Hotend Mounting Plate for R2 and C2 This is the aluminum plate that holds the hotend Comes with an upgraded (12.9 grade) M3 socket head cap screw used to secure the hotend to the aluminum mounting plate. Use caution when installing,...

Robo R1+ Hotend Quick Release Plate This plate locks the hotend in place. Hardware not included.  Includes: Hotend plate (1 pcs) Fits: Robo R1Robo R1+ 

  4010 Air Filter Fan This fan is used for the internal air filter. Includes: Fan (1 pcs) Size: 40x40x10mm Fits:Adventurer 5MAdventurer 5M ProRobo E4

Cover for IR Bed Leveling Sensor Includes: Cover (1 pcs) Fits:Robo R2Robo C2

*Clearance item - no returns  Blemished  These rolls of tape are wound slightly off-center, however the tape is good and fully usable.  Heat Resistant Kapton Tape Use this tape to secure the insulation to your Flashforge heater...

  Z Axis Lead Screw and Stepper Motor  Includes: Motor with Leadscrew (1 pcs) Fits: Robo C2 Note: Brass nut not included. Nut available here.

Leadscrew Bushing This small plastic bushing is located at the bottom of the Z axis leadscrew. Includes: Bushing (1 pcs) Fits:Adventurer 3Adventurer 3 ProRobo E3Monoprice Voxel

Robo R1+ Leadscrew Nut Includes: Leadscrew Nut (2 pcs) Fits: Robo R1+Robo R1 with upgraded Z axis

Robo R2/C2 Leadscrew Nut Includes: Nut (1 pcs)  Fits:Robo R2Robo C2

  Flashforge LED Board - Light Strip Includes: LED light board (1 pcs) Fits:Guider 2Guider 2S HTCreator 3Robo E3 Pro

  Flashforge LED Board - Light Strip Includes: LED light board (1 pcs) Fits:Guider 3Guider 3 PlusGuider 3 UltraRobo E4 Pro Creator 4

Robo LED Light Assembly Includes: Light assembly (1 pcs) Fits:Robo C2

  Flashforge LED Board Fits in the print head and lights the object being printed. Includes: LED Board (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versionsFinder 2Monoprice VoxelRobo E3

  Flashforge Limit Switch Includes: Limit Switch (1 pcs) Location: X, Y or Z axis Fits:Finder 3Guider 2Guider 2S HTInventorRobo E3 Pro Fitment Note: Fits different locations on different printers. Make sure the switch in the picture...

  Flashforge Build Plate Limit Switch (Y Axis Sensor) For the Y Axis Includes: Limit switch (1 pcs) Fits:Adventurer 3 (Adventurer 3 and 3 Pro)Monoprice VoxelRobo E3 Scroll down for Adventurer 4 instruction video 

  Flashforge Z Limit Switch This is the limit switch (endstop) for the Z axis. It is sometimes called the Z axis sensor switch. Includes: Limit switch (1 pcs) Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Monoprice VoxelRobo E3