Sensors - Filament & Bed

Sensors - Filament & Bed

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • MakerGear Bed Level Kit

    Bed Leveling Probe Upgrade for the MakerGear M3-ID REV.0

    MakerGear OEM Parts

    $149.95
    This kit will upgrade your MakerGear M3-ID REV.0 to have the same improved leveling process and auto-compensation as the MakerGear M3-ID REV.1 3D Printers.   Installation Guide 
    SKU:
    MG-BLT-M3ID-R0
    $149.95
    Qty in Cart: 0
    Quantity:
    Price:
    $149.95
    Subtotal:
  • BLTouch Smart

    BLTouch Smart v3.1 | ANTCLABS

    ANTCLABS

    Regular Price: $39.00
    $34.95
    Genuine   Genuine BLTouch v3.1 Bed Leveling Probe  ​BLTouch is an auto leveling sensor for 3D printers that can precisely measure the tilt of bed surface. It works with many kinds of bed material, such as glass, woods, metals,...
    SKU:
    BLT-SMART
    Regular Price: $39.00
    $34.95
    Qty in Cart: 0
    Quantity:
    Price:
    Regular Price: $39.00
    $34.95
    Subtotal:
  • 2 Meter BLTouch Extension Cable

    Cable for BLTouch - 1 Meter

    PB3D

    $6.99
    Universal BLTouch Cable - 1 Meter This is one long cable that plugs directly into the BLTouch and eliminates the additional joints created when using other BLTouch extension cables. Comes standard with BLTouch connector on one end and a Dupont 3 pin...
    SKU:
    PBX-BLT-EXT-1000
    $6.99
    Qty in Cart: 0
    Price:
    $6.99
    Subtotal:
  • BLTouch Extension Cable - 2 Meter

    Cable for BLTouch - 2 Meter

    PB3D

    $7.99
    Universal BLTouch Cable - 2 Meter This is one long cable that plugs directly into the BLTouch and eliminates the additional joints created when using other BLTouch extension cables. Comes standard with BLTouch connector on one end and a Dupont 3 pin...
    SKU:
    PBX-BLT-EXT-2000
    $7.99
    Qty in Cart: 0
    Quantity:
    Price:
    $7.99
    Subtotal:
  • Extension Cable for BLTouch

    Extension Cable SM-XD (1.5 Meter) | BLTouch

    ANTCLABS

    $7.99
    BLTouch Extension Cable SM-XD 1.5 meter extension cable for the BLTouch bed sensor Please Note: This is a universal extension cable, so you may need to move the position of the pins in the housing for your particular application. 
    SKU:
    BLT-EXT-SMXD-1500
    $7.99
    Qty in Cart: 0
    Quantity:
    Price:
    $7.99
    Subtotal:
  • Filament sensor with waring harness

    Filament Runout Sensor with 1 Meter Wire

    PB3D

    $6.99
    Filament Runout Sensor  For 1.75mm diameter filament Includes: Filament sensor module 1 meter connection cable (please measure and make sure that this will be long enough for your specific application) Please Note: Mount not included...
    SKU:
    PBX-FSENS
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    $6.99
    Subtotal:
  • R2 Filament Sensor

    Filament Sensor - R2/C2 | Robo 3D

    Robo 3D

    $12.95
    Robo Filament Sensor This is a replacement filament sensor only.  Fits: R2 and C2 Here is great write up by Tkoco on the Robo forums for replacing the filament sensor on a C2. If needed Buy the R2/C2 filament sensor block here.
    SKU:
    R2C2-FSENS-PCB
    $12.95
    Qty in Cart: 0
    Quantity:
    Price:
    $12.95
    Subtotal:
  • Robo R2 Filament Sensor Block

    Filament Sensor Block - R2/C2 | Robo 3D

    Robo 3D

    $6.95
    Robo OEM Filament Sensor Block Fits: R2 and C2 This is the replacement filament sensor block only.  Buy the R2/C2 filament sensor here.
    SKU:
    R2C2-SENSR-BLK
    $6.95
    Qty in Cart: 0
    Quantity:
    Price:
    $6.95
    Subtotal:
  • Flashforge Z Limit Switch

    Limit Switch - Regular | Flashforge

    Flashforge OEM Parts

    $6.95
    Flashforge Limit Switch - Regular Fits: Adventurer 3 Creator Pro Dreamer 2 Inventor 2
    SKU:
    FLF-LSWITCH-Z-CRP
    $6.95
    Qty in Cart: 0
    Quantity:
    Price:
    $6.95
    Subtotal:
  • Genuine Replacement Pin Probe for BLTouch

    OEM Replacement Pin for BLTouch | ANTCLABS

    ANTCLABS

    Regular Price: $9.95
    $8.95
    OEM Replacement Pin for the BLTouch Smart  This is the genuine ANTCLABS replacement pin for the BLTouch. Fits: BLTouch Smart with plastic pin  
    SKU:
    BLT-PIN
    Regular Price: $9.95
    $8.95
    Qty in Cart: 0
    Quantity:
    Price:
    Regular Price: $9.95
    $8.95
    Subtotal:
  • Replacement Pin Probe for BLTouch

    Replacement Pin for BLTouch

    Other

    Regular Price: $6.95
    $4.95
    Generic Replacement Pin for the BLTouch Smart  This is a generic brand replacement pin for the BLTouch. We are using this pin with our BLTouch and it is working great. Be sure to insert the pin in the correct orientation with the flat side of the...
    SKU:
    PBX-BLT-PIN
    Regular Price: $6.95
    $4.95
    Qty in Cart: 0
    Quantity:
    Price:
    Regular Price: $6.95
    $4.95
    Subtotal:
  • Replacement Pin Probe for BLTouch - 2 pack

    Replacement Pin for BLTouch - 2 Pack

    Other

    Regular Price: $9.95
    $7.95
    Generic Replacement Pins for the BLTouch Smart These are generic replacement pins for the BLTouch. We are using these pins with our BLTouch and they are working great. Be sure to insert the pin in the correct orientation with the flat side of the pin...
    SKU:
    PBX-BLT-PIN-2PK
    Regular Price: $9.95
    $7.95
    Qty in Cart: 0
    Quantity:
    Price:
    Regular Price: $9.95
    $7.95
    Subtotal:
  • Total: items /

Adding your products to cart