Electronics

Anti Static ESD Grounding Bracelet Wear whenever working on the electronics of your 3D printer to reduce the risk of damage to sensitive components. Note: Always shut down and unplug your printer before working on it.

Panasonic Automotive Relay 20A 24VDC 1 FORM A BRACKET Manufacturer: Panasonic RoHS:  Details Coil Voltage: 24 VDC Relay Contact Form: 1 Form A (SPST-NO) Contact Current Rating: 20 A Coil...

Battery Low Voltage Shutoff "Blinker Board" - 10 amp Protects tool batteries from over discharge. Max Amps: 10 (if you need to power something more than 10 amps, we recommend using the 3 amp blinker board with an appropriately sized...

Blinker Board - 3 amp Protects tool batteries from over discharge. Max Amps: 3 (if you need to power something more than 3 amps, use a relay) Compatible with: DeWalt, Milwaukee and Makita 12/18/20 volt batteries.  These are called...

5 Amp DC-DC Buck Converter XL4015 Input voltage 4.0 ~ 38V Adjustable output voltage range 1.25V ~ 35V (Input voltage must be higher than the output voltage by 1.5V) Output current 4A recommended (up to 5A) Power indicator light Includes...

Ceramic Screwdriver Used for adjusting stepper drivers and other electronics Tip Size: 1.8x0.4mm

DC Power Cable with 5.5mm x 2.1mm Male Barrel Plug Specs Max current: 3A Red Connector: Center Pole Black Connector: Outer Pole Material: PVC Barrel Plug Size: 5.5 x 2.1mm Wire Length:100cm/39''(approx)    

DC extension cable A241 - Male to Male  Length: 6 feet Plug: 5.5mm x 2.1mm barrel  

DC Barrel Plug with Cord Plug: 5.5x2.1mm - Right Angle  Wire: 22AWG Wire Length: 1.5 Meter    

Adjustable DC-DC  Boost Converter XL6009 Module These boost converters are great to use in conjunction with our power tool battery adapters. Specifications: Input Range: 3V - 32V Output Range: 5V - 35V  Module Properties: Non-isolated...

Heatsink for Stepper Drivers Heatsink in silver aluminum to remove heat from desired component. Equipped with self-adhesive on the back for easy attachment.   Dimensions: 8.8 x 8.8 x 5 mm (+/- .15mm)

Keystudio MEGA 2560 R3 Board Atmega16u2/Atmega2560 for Arduino Includes: Atmega16u2/Atmega2560 Board (1 pcs) This is a high quality clone version of the original Arduino Mega 2560 with Atmega16u2 and Atmega2560 chips. Note: If you plan to...

Class 10 Micro SD Card - 32 GB  

Raspberry Pi 3 for Robo R2 and C2 3D Printers Board only, does not include SD card or OS.   Buy a blank 16GB Micro SD Card here Fits: R2 and C2

Single Port USB Converter Module - Input 6-24V, Output 5V 2.1A Use this USB module combined with our battery adapters and .stl files to make a portable usb power supply. Buy the battery adapters here Specs Input 6-24...

Sonoff™ Wifi Wireless Smart Switch Use this smart switch to control the power supply to electronic devices throughout your home using your Amazon Alexa or Google Home, or control from your phone using the app. We designed a nice 3D printable...