Sovol

Toothed Idler Pulley for X/Y Axis This is the toothed idler pulley for the X/Y axis belt. Includes: Toothed pulley (1 pcs) Fits: Sovol SV08  Important  This is only one...

Smooth Idler Pulley for X/Y Axis This is the smooth idler pulley for the X/Y axis belt. Includes: Smooth pulley (1 pcs) Fits: Sovol SV08  Important  This is only one pulley,...

HDMI Capacitive Klipper Screen Includes: Screen (1 pcs) Fits:Sovol ZeroSovol SV08 Electronic item return policy

Planetary Gear Set Includes: Planetary gear (3 pcs) Fits: SV08 Notes:Bearings not included. It is recommended to grease the gears. You can find grease here.  

Heated Bed Transfer Board (AC Voltage Relay) Includes: Transfer board (1 pcs) Fits: SV08

Z Axis Leadscrew Includes: Leadscrew (1 pcs) Fits: SV06 PlusSV06 Plus Ace

Z Axis Leadscrew Includes: Leadscrew (1 pcs) Fits: SV06SV06 Ace

Hotend Air Duct Set Directs airflow to the part being printed Includes: Front air duct (1 pcs)Rear air duct (1 pcs) Fits: SV08 Note: The front air duct comes in two separate...

Gates GT Timing Belt for XY Axis Includes: Timing belt (1 pcs) Width: 5.7mmLength: 1876mmType: LL Fits: Sovol SV08 - XY Axis

GT Timing Belt  Includes: Timing belt (1 pcs) Width: 6mmLength: 186mmType: Closed loop Fits: Sovol SV08

GT Timing Belt  Includes: Timing belt (1 pcs) Width: 10mmLength: 1060mm (1.06 meter) Fits: Sovol SV08 Z Axis

LCD Screen Cable (Flat Cable) Connects to LCD Screen. Includes: Flat Cable (1 pcs) Fits: SV06 

Touch Screen Cable (Flat Cable) Connects to touchscreen. Includes: Flat Cable (1 pcs) Fits: SV06 Plus (with touch screen)

Main Wire Harness for Extruder Connects from mainboard to extruder. Includes: Wire harness (1 pcs) Fits: SV08

Accelerometer Includes: Accelerometer (1 pcs) Fits: Sovol SV07Sovol SV07 Plus

Cable for Accelerometer Includes: Cable (1 pcs) Fits: Sovol SV07Sovol SV07 Plus

Mainboard (Motherboard) for Sovol SV08 This silent mainboard comes with firmware loaded. Includes: Mainboard (1 pcs) Fits: SV08

Power Supply Unit Includes: Power supply unit (1 pcs) Specs: Power Output: 150WOutput Voltage: 24V Fits: Sovol ZeroSovol SV08Sovol SV08 MaxSovol T300

Retaining Clip for Heater Block This clip holds the heater and thermistor in place on the heater block. Includes: Clip (1 pcs) Fits: SV08

Silicone Sock Includes: Silicone sock (1 pcs) Fits: SV08