Stepper Motors and Drivers

Stepper Motors and Drivers

  • MakerGear Extruder Motor with Gear

    Extruder Motor - Base | MakerGear

    MakerGear OEM

    $24.95
    Extruder Stepper Motor for MakerGear 3D printers Includes: 1.8° stepper motor base Pinion gear (installed) Fits: M2 M3 Note: Does not include the 5.16:1 planetary gearbox. Click here if you need the stepper motor with...
    SKU:
    MG-MOTR-EXT-BASE
    Fits:
    M2
    Fits:
    M3 SE
    Fits:
    M3 ID
    Category:
    Extruder & Hotend
    $24.95
  • Bondtech Heatsink for Nema 17 Stepper Motor

    Heatsink for Nema17 Stepper Motor - Black

    PB Select

    $2.49
    Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component. Equipped with self-adhesive on the back for easy attachment. Fits: Nema17 stepper motors Dimensions: 40 x 40 x 10 mm
    SKU:
    PBX-HEATSINK-BLK
    $2.49
  • Lead Screw with Stepper Motor - R2 or R1+ | Robo 3D

    Lead Screw with Stepper Motor - R2 or R1+ | Robo 3D

    LDO Motors

    $49.95
    Replacement Z Axis Lead Screw and Stepper Motor 355mm lead screw (slightly longer than stock) Fits: R2 R1 and R1+ that use the upgraded TR8 2mm pitch, 2 thread start, ACME thread lead screws. If you have an older R1 with threaded...
    SKU:
    R2R1-MOTR-Z
    Fits:
    R1+
    Fits:
    R2
    Category:
    Leadscrews
    Category:
    Stepper Motors
    $49.95
  • Loctite 609

    Loctite 609™ - .5ml | Henkel 60905®

    Loctite

    $4.99
    Henkel 60905 LOCTITE® 609™ Press Fit Retaining Compound - .5 mL (.02 oz) Capsule We use this to install the pinion gear onto the extruder motor shaft of MakerGear 3D Printers MSDS
    SKU:
    LOC-609
    Fits:
    Universal
    Category:
    Stepper Motors
    $4.99
  • Geared Stepper Motor for 3D Printer

    Nema 17 Geared Stepper Motor | Bondtech

    Bondtech

    $34.95
    Nema 17 Geared Stepper Motor for Bondtech Extruders Nema17 geared stepper with 5.18:1 ratio and a planetary gear reducer and a 700 mm long PC2510 cable with quick-fit connectors (see additional cable sizes available in Related Products below) For best...
    SKU:
    BOND-NEMA-13001
    $34.95
  • Nema 17 Pancake Stepper Motor 22mm

    Nema17 Pancake Stepper Motor - 22mm | Bondtech

    Bondtech

    $13.99
    22mm Nema 17 Stepper Motor for Bondtech Extruder Nema17 Pancake stepper motor with a 41 cm non-detachable, bare end leads (no plug). Max Input current: 0.8A Step angle: 1.8 deg. Torque: 12 Ncm Outputshaft diameter: 5.0 mm with flat. Hole for...
    SKU:
    BOND-NEMA-22-13002
    $13.99
  • Nema17 Pancake Stepper Motor 25mm

    Nema17 Pancake Stepper Motor - 25mm | Bondtech

    Bondtech

    $16.99
    Nema 17 Stepper for Bondtech Extruder Nema17 Pancake stepper motor with detachable 30 cm long cable without connector. Max Input current: 0.7A per phase Step angle: 1.8 deg. Torque: 18 Ncm Outputshaft diameter: 5.0 mm Hole for mounting: 31...
    SKU:
    BOND-NEMA-25-13003
    $16.99
  • Bondtech SlimPower Stepper Motor 0.9 Deg

    Nema17 Slim Power Stepper Motor - 0.9 Degree | Bondtech

    Bondtech

    $15.95
    Nema 17 Slim Power 0.9 Degree Stepper Motor Nema 17 High resolution 0.9 degree pancake stepper motor. Perfect fit for our BMG / Prusa extruder upgrades. Includes 1000 mm long cable with Dupont 4-pin connector to a JST-PH6 6-pin connector. NEMA 17...
    SKU:
    BOND-NEMA-LDO13005
    $15.95
  • Robo R2 Extruder Motor

    Stepper Motor with Gear - Extruder - R2, C2 | Robo 3D

    Robo 3D

    $24.95
    Nema17 Stepper Motor for Robo R2 and C2 3D Printers Includes filament drive gear Fits: Robo R2 and C2  Contains: 1 Motor, 1 Hobbed Gear
    SKU:
    R2C2-MOTR-E
    Fits:
    R2
    Fits:
    C2
    Category:
    Extruder & Hotend
    Category:
    Stepper Motors
    $24.95
  • Robo 3D Replacement Stepper Motor

    Stepper Motor XYE - R2, C2, R1+ | Robo 3D

    Robo 3D

    $24.95
    Nema17 Stepper Motor - for Robo 3D Printers For the X/Y and Extruder axis of the R1, R2 and C2 3D printers Fits: R2 - X/Y and Extruder C2 - X/Y and Extruder R1 - X/Y and Extruder R1+ - X/Y and Extruder Sold in units of one  
    SKU:
    ROBO-MOTR-XYE
    Fits:
    R2
    Fits:
    C2
    Fits:
    R1+
    $24.95
  • Stepper Motor for MakerGear 3D printer

    X or Y Axis Motor | MakerGear

    MakerGear OEM

    $24.95
    XY Stepper Motor for MakerGear 3D printers These motors are used to drive both the X and Y motion (1 motor for each) of the MakerGear M3 3D Printers  Specs: 1.8° stepper motor with shaft; at x16 microstepping, 88.88 steps/mm.
    SKU:
    MG-MOTR-XY
    Fits:
    M2
    Fits:
    M3 SE
    Fits:
    M3 ID
    Category:
    Stepper Motors
    $24.95