Tools & Shop Supplies

Flange Screw This screw is usually used to hold a bead thermistor in the heater block. Includes: Flange screw (1 pcs) Size: M3x5mm

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

3D Print Removal Tool - Scraper This is the model that comes with new Artillery printers. It can be used with any printer.  Includes: Scraper (1 pcs)

3D Print Removal Tool - Scraper This is the model that comes with new Artillery printers. It can be used with any printer.  Includes: Scraper (1 pcs)   Note: This new version from Artillery has a slightly thinner handle...

 Important Shipping Notes  - Ships to the US and Canada only- Cannot be shipped to PO boxes- Drop ships directly from PrintDry, please allow an additional 3-4 day processing time- Ships from Canada- Only ships UPS/FedEx ground, no...

Adjustable Wire Stripper Includes: Wire stripper (1 pcs) We use these adjustable wire strippers in our shop when adding electronics to 3D printed items (like these battery adapters). We like to have a few around, each one set...

LAOA Automatic Wire Strippers  We use these in our shop and have been happy with the performance. Includes: Wire Stripper Tool (1 pcs) Specs:Adjustable: Strips 10-28AWG wire.  Wire stop for consistent strip lengthWire cutter

Anti Static ESD Grounding Bracelet Wear whenever working on the electronics of your 3D printer to reduce the risk of damage to sensitive components. Note: Always shut down and unplug your printer before working on it.

  Basics of 3D Printing with Josef Prusa   English Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d.com...

  Basics of 3D Printing with Josef Prusa   Spanish Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d.com...

Fine Tip Blade for Edge Cleanup (Deburring) Tool This blade has a smaller tip than the blade that comes standard on the edge cleanup tool, allowing you to clean smaller areas, if needed. Includes: Blade (1 pcs) Note: This is the blade only,...

Replacement Blade for Edge Cleanup (Deburring) Tool Includes: Blade (1 pcs) Note: This is the blade only, the handle is not included. Buy the full tool here.  

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...

Bowden Tube Cutter for PTFE Tubing This handy little tool easily makes super clean cuts in PTFE tubing. Buy premium Capricorn PTFE tubing here.  

Bowden Tube Cutter for PTFE Tubing This handy little tool easily makes super clean cuts in PTFE tubing. Buy premium Capricorn PTFE tubing here.    

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

CD-20 Ceramic Screwdriver Used for adjusting stepper drivers and other electronics Tip Size: 1.8x0.4mm

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

HARDMAN DOUBLE/BUBBLE 2 Part Epoxy - Very High Peel Strength - Orange This is the epoxy we use for attaching the magnets to the R1/+ glass print bed. Full curing time is stated to be 7 days. However, when applying magnets to the R1 glass bed, we...

 Important Shipping Notes  - Ships to the US and Canada only- Cannot be shipped to PO boxes- Drop ships directly from PrintDry, please allow an additional 3-4 day processing time- Ships from Canada - Only ships UPS/FedEx...