Tools & Shop Supplies

PBX45S Soldering Iron This soldering iron has an on/off switch on the handle and works great with the Heat-Set Insert Soldering Iron Tips by Virtjoile On/Off Switch: Yes Volts: AC110-120 Temperature range: 180-500c Heating element: Ceramic...

Poly Prep Refill for Tech-Bond Polymer Bonding Kit Includes: 1.5 ounce bottle of Poly Prep (1 pcs)  

Tech-Bond Basic Poly Kit This is the best bonding system we have found for bonding 3D printed parts. It bonds everything, even Nylon and PTFE. We keep this around our shop and use it whenever we need to glue printed parts together. Kit Contains One...

Print Surface Applicator with Felt Please note: We include one of these free with every BuildTak Flexplate System.  Use this squeegee to remove air bubbles from you print surface as you apply it.  Has a harder squeegee side and softer felt...

High Tamp PTFE Tube - Clear Includes: 3 meter PTFE tube (1 pcs) Inside diameter: 2mm (± .1mm) Outside Diameter: 4mm Color: Clear Max Temp: 260°c This premium high temperature PTFE tubing can withstand temperatures of up to 260°c. The...

Premium PTFE Tube - Orange Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 1.9mm Outside Diameter: 4mm Color: Orange Max Temp: 250°c This premium PTFE...

Standard PTFE Tube - Clear Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 2mm (± .1mm) Outside Diameter: 4mm Color: Clear Max Temp: 200°c This is nice quality PTFE...

Standard PTFE Tube - White Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 2mm (± .1mm) Outside Diameter: 4mm Color: White Max Temp: 240°c This is nice quality PTFE...

PB Select™ Hardware Kit Includes:M3x16 - fan to fan duct (4 pcs)M3x10 pan head - to clamp heater (2 pcs)M3x4 set screw for thermistor (2 pcs)M2 hex wrench (1 pcs)M1.5 hex wrench (1 pcs) For:E3D V6Prusa i3RepRap

Screwdriver PH2 Screwdriver with a PH2 head. PH2 is the recommended standard for the screws used on Original Prusa Printers. Includes: Screwdriver (1 pcs) Specifications:Red Hand: PlasticScrewdriver length L1: 160 mmShank length...

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK4Prusa XL

Socket Adapter for Slice Engineering Torque Wrench This adapter allows for the use of 1/4 inch sockets with the Slice Engineering Nozzle Torque Wrench. With this adapter you can use the torque wrench with different size nozzles by using...

L Shaped Socket Wrench Size: 10 mm Includes: Wrench (1 pcs)

L Shaped Socket Wrench Size: 6 mm Includes: Wrench (1 pcs)

L Shaped Socket Wrench Size: 7 mm Includes: Wrench (1 pcs)

L Shaped Socket Wrench Size: 8 mm Includes: Wrench (1 pcs)

L Shaped Socket Wrench Size: 9 mm Includes: Wrench (1 pcs)

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...