Printer Parts

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

3mm Bed Magnets for R1/+ Glass Bed Apply using epoxy and clamps for best results. Includes: Magnet (4 pcs) Fits:Robo R1Robo R1+ Note: These magnets are 3mm thick and do not work with the latest v2.5 R1+ bed, which requires 6mm...

PB Select™ 3mm Nylon Filament  This 3mm nylon filament is used in the wiring harness of Prusa i3 printers.The length is 50cm which is the proper length for the extruder wiring harness. It can be cut down to 30cm if you need it...

  Prusa 3x1 Magnet Set (2 pcs) for the MMU3 A pair of replacement magnets for the MMU3 Includes: Magnets (2 pcs) Size: 3x1mm To correctly install this replacement part, visit help.prusa3d.com

  Bambu 4-in-1 PTFE Adapter The Bambu 4-in-1 PTFE Adapter is an adapter used to connect the PTFE tube. Compared to the original PTFE tube connector, the 4-in-1 adapter can connect 4 feeder modules to the printer at the same time. (up to 7...

  4010 Extruder Fan for MakerGear M2 - 12 volt  Includes: Fan (1 pcs) Voltage: 12 VDCSize: 40x40x10mmLocation: Extruder or electronics caseLength: Micro-Fit 3.0 43020 Fits: M2 (12 volt version) This is the...

4015 Blower Fan for Elegoo Neptune 3 Series Includes: Fan (1 pcs) Size: 40x40x15mmSpecs: 24 VDC, 0.10A Fits: Elegoo Neptune 3Elegoo Neptune 3 ProElegoo Neptune 3 PlusElegoo Neptune 3 Max

PB Select™ Metal Fan Guard Includes: Fan guard (1 pcs) Fits: 40x40mm fans Note: Mounting screws not included

  Creality Ender-3 V2 Blower Fan This is the fan that cools the part when printing Includes: Blower Fan (1 pcs) Fits: Ender-3 V2Ender-3 V2 NeoCR-200B

  4010 Extruder Fan This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against incorrect plug-in. All fans should be kept free of...

  4015 Bed Fan This is the fan the cools the part being printed. It is sometimes called the print or part cooling fan.  Includes: Fan (1 pcs) Voltage: 24 VDCSize: 40x40x15mmConnector: Micro-Fit 3.0 43020 Fits: M3    

24-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in.  Fits: All MakerGear M3s    

  Flashforge Replacement Power Supply (PSU) Includes: Power supply (1 pcs) Specifications:Input: 100-240VAC 5.9A 50/60 HzOutput: 24v, 21A Fits: Creator 3Guider 2Guider 2S HTRobo E3 Pro

  5010 Extruder Fan for MakerGear M2 - 12 volt  Includes: Fan (1 pcs) Voltage: 12 VDCSize: 50x50x10mmLocation: ExtruderConnector: Micro-Fit 3.0 43020 Fits: M2 (12 volt version) Mounted at a 45 degree angle in...

  5010 Extruder Fan for MakerGear M2 Dual Extruder - 24 volt  Includes: Fan (1 pcs) Voltage: 24 VDCSize: 50x50x10mmLocation: ExtruderConnector: Micro-Fit 3.0 43020Fits: M2 Dual Extruder  This fan has longer...

  5010 Extruder Fan for MakerGear M2 - 24 volt Includes: Fan (1 pcs) Voltage: 24 VDCSize: 50x50x10mmLocation: Extruder Fits: M2 (24 volt version) Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm...

  E3D Dual Ball Bearing Blower Fan - 50x50x15mm 12v These fans have the E3D seal of approval. Great for the Prusa MK2 or Use anywhere else you need a good quality ball bearing blower fan. Includes: Fan (1...

  Flashforge Y Stepper Motor Cable This stepper motor cable is designed for the Flashforge Guider 2, but may be used for other applications. Includes: Cable (1 pcs) Connector A: PH 6 PinConnector B: XH 4 Pin Length:...

6025 Dual Ball Bearing Fan Includes: Fan (1 pcs) Specs:Dual Ball Bearing12VDC0.20ALead Length: 270mm (Approximately)Plug Type: 2510 2.54mm 2 Pin Size: 60x60x25mm Note: Brand will either be Son Times or The Source of the Wind

  6063 GT Pulley Includes: 6063 2GT Pulley (1 pcs) Fits: Creator 4 Note: 2 set screws needed for installation (not included). Set screws available here.