Printer Parts

Extruder Adapter Board Includes: Extruder adapter board (1 pcs) Fits:SV06SV06 Plus

Extruder Adapter Board Includes: Extruder adapter board (1 pcs) Fits:SV07SV07 Plus

  Extruder Assembly Includes: Extruder (1 pcs)0.40mm nozzle (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4

Extruder Assembly with All Metal Hotend This Extruder assembly has an all metal hotend for printing higher temperature. Complete extruder/hotend assembly including heater, thermistor and fan. However it does not include any of the wires that connect it...

Artillery Extruder Assembly with All Metal Hotend This extruder assembly has an all metal hotend for printing higher temperature. Complete extruder/hotend assembly including heater, thermistor and fans. However it does not include any of the wires that...

Extruder Assembly with All Metal Hotend This Extruder assembly has an all metal hotend for printing higher temperature. Complete extruder/hotend assembly including heater, thermistor and fan. However it does not include any of the wires that connect...

  Filament Feeder (Extruder) Assembly Fully assembled Includes:Filament runout sensor (1pcs)Stepper motor (1 pcs)PTFE tube (1 pcs)Filament feeder assembly (1 pcs)  Fits: Adventurer 4 Pro

  Filament Feeder (Extruder) Assembly Fully assembled Includes:Filament runout sensor (1pcs)Stepper motor (1 pcs)PTFE tube (1 pcs)Filament feeder assembly (1 pcs)  Fits: Adventurer 4

  Flashforge Filament Feeder (Extruder) Assembly Comes fully assembled and ready to install. Includes:Filament runout sensor (1 pcs)Cable for runout sensor (1 pcs)Stepper motor (1 pcs)PTFE tube (1 pcs)Filament feeder...

  Flashforge Filament Feeder (Extruder) Assembly Comes fully assembled and ready to install. Includes:Filament runout sensor (1 pcs)Cable for runout sensor (1 pcs)Stepper motor (1 pcs)PTFE tube (1 pcs)Filament feeder assembly  Fits:...

  Flashforge Left Extruder Assembly  Includes: Extruder with hotend assembly (1 pcs) Location: Left Side  Fits: Guider 3 Ultra

  Flashforge Extruder Assembly (LH) Complete, fully assembled LEFT SIDE extruder assembly. Includes:Stepper motor (1 pcs)Heatsink (1 pcs)Fan - Heatsink (1 pcs)Fan - Print cooling (1 pcs)Fan cover (1 pcs)Extruder PCB board (1 pcs)Heat break...

Extruder Assembly for Sovol SV07 and SV07 Plus Includes: Extruder assembly (1 pcs) Fits: SV07SV07 Plus

  Flashforge Left Extruder Assembly  Includes: Extruder with hotend assembly (1 pcs) Location: Right Side  Fits: Guider 3 Ultra

  Flashforge Extruder Assembly (RH) Complete, fully assembled RIGHT SIDE extruder assembly. Includes: Stepper motor (1 pcs)Heatsink (1 pcs)Fan - Heatsink (1 pcs)Fan - Print cooling (1 pcs)Fan cover (1 pcs)Extruder PCB board (1 pcs)Heat break...

   Refurbished Item Removed from low hour 3D printers, may show signs of use. Flashforge Extruder Assembly  Includes: Extruder/Hotend Assembly (1 pcs) Fits: Dreamer NX Note: Extension wires that run from the...

   Used Item  Removed from moderate hour 3D printers and Refurbished.  Flashforge Dual Extruder Assembly  Includes: Extruder/hotend assembly (1 pcs) Fits:DreamerInventor Note: Wiring harness is not...

  Flashforge Extruder Assembly  Includes: Extruder assembly with 0.40mm nozzle (1 pcs) Fits: Guider 3 Plus Does not fit standard Guider 3

  Flashforge Extruder Assembly  Includes: Extruder assembly with 0.40mm nozzle (1 pcs) Fits:Guider 3Robo E4 Pro Does not fit Guider 3 Plus

Extruder Assembly for Robo R2/C2 NOTE: Does not include the hotend assembly. If needed, purchase the correct hotend assembly below: R2 Hotend Assembly C2 Hotend Assembly  Fits: This is a C2 extruder assembly, but it will also fit the R2 (the...

Artillery Standard Extruder Assembly  Complete extruder/hotend assembly including heater, thermistor and fans. However, it does not include any of the wires that connect to the mainboard.  Includes: Extruder assembly (1 pcs) Fits:...

Standard Extruder Assembly  Complete extruder/hotend assembly including heater, thermistor and fan. However, it does not include any of the wires that connect to the mainboard.  Includes: Extruder assembly (1...

Standard Extruder Assembly  Complete extruder/hotend assembly including heater, thermistor and fan. However, it does not include any of the wires that connect to the mainboard.  Includes: Extruder assembly (1 pcs) Fits: Genius

Extruder Assembly for SV06 Plus Includes: Extruder assembly (1 pcs) Fits: SV06 Plus

Extruder Assembly for SV06 Includes: Extruder assembly (1 pcs) Fits: SV06

  Flashforge Inventor 2/S Extruder Assembly This extruder includes the belt (belt not shown in pictures). Includes:Extruder/hotend assembly (1 pcs)Timing belt - installed (1 pcs) Fits:Inventor 2Inventor 2S

    Flashforge Inventor 2/S Extruder Assembly This extruder includes the belt (belt not shown in pictures). Includes:Extruder/hotend assembly (1 pcs)Timing belt - installed (1 pcs) Fits:Inventor 2Inventor 2S

Robo R1+ Extruder Lever Axle Shaft  Includes: Shaft (1 pcs) Fits:Robo R1Robo R1+

Extruder Carriage Bearing Block These bearing blocks are removed from brand new C2 extruder assemblies. They are new, but may show some signs of being disassembled. These come with the stock OEM bearings. We have high precision upgraded bearings...

  Flashforge Extruder Board (Extruder Transfer Board) This is the top PCB board that the flat cable plugs into. It is also the X axis sensor. Includes: Transfer board/limit switch (1 pcs) Fits: Adventurer 4 Scroll down for instruction video

  Flashforge Extruder PCB Board Includes: Extruder board (1 pcs) Fits:DreamerInventor

Robo R1+ Extruder Bracket  Includes: Bracket (1 pcs) Fits:Robo R1Robo R1+ 

Extruder Breakout Board (PCB Adapter Board) Includes: Breakout board (1 pcs) Fits: Hornet

Artillery 20Pin, 500mm, FFP Cable for Extruder Adapter Board Includes: Cable (1 pcs) Length: 500mmPins: 20  Fits: Sidewinder X1

  Flashforge Extruder Cable Runs from mainboard to extruder. Includes: Extruder cable (1 pcs) Fits: Guider 3 Plus

  Flashforge Extruder Cables This is the flat cable that runs form the mainboard to the extruder PCB board. Includes: Extruder flat cable (1 pcs) Fits: Guider 3, Robo E4 Pro

   Used Item  Removed from low hour 3D printer Flashforge Extruder Carriage (Bracket) Includes: Carriage bracket (1 pcs) Fits:Creator ProCreator MaxDreamerInventor

   Used Item   This item is fully functional, but may show signs of use, such as scuffs and scratches. Flashforge Extruder Carriage (Bracket) Includes: Carriage bracket (1 pcs) Fits: Dreamer NX

LM6LUU Linear Bearings Precision linear bearings. Includes: Linear Bearings (4 pcs) Specifications:ID: 6mmOD: 12mmL: 35mm Fits:Robo R2Robo C2    

Artillery Plastic Extruder Cover Includes: Extruder Cover (1 pcs) Color: Black Fits:Sidewinder X1Genius

Artillery Plastic Extruder Cover Includes: Extruder Cover (1 pcs) Color: Blue Fits:Sidewinder X1Genius

  Left Extruder Cover Includes: Left cover (1 pcs) Fits: Creator 3

Extruder Cover (ABS) Includes: Plastic cover (1 pcs) Fits: Hornet

  Right Extruder Cover Includes: Right cover (1 pcs) Fits: Creator 3

  Extruder Cover Includes: Cover (1 pcs) Fits:Finder 3 Note: Mounting hardware not included.

  Extruder Cover Includes: Cover (1 pcs) Fits:FinderFinder 2Inventor 2Guider 2Guider 2S HTRobo E3 Pro Note: Mounting hardware not included.

Socket Head Cap Screw - 2 pack We have found that it is easy to strip the heads of the extruder cover screws on the K1 series of printers. We offer these are upgraded screws that are stronger. Used to secure the extruder cover. Size:...

Robo R1+ Big Extruder Drive Gear  Includes: Gear (1 pcs) Fits:Robo R1Robo R1+ 

Robo R1+ Small Extruder Drive Gear Includes: Gear (1 pcs) Fits:Robo R1Robo R1+ 

Extruder Drive Gear (Motor Pinion) for Prusa MINI OEM Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI and MINI+ extruder motor. This drive gear sits directly on the extruder motor shaft. Includes:Extruder Drive Gear (Motor...

Extruder Drive Gear This drive gear works as either the drive or driven gear. If you are replacing both drive gears, order two.  Includes: Drive gear (1 pcs) Fits: SV06SV06 PlusSV07SV07 Plus Note: Requires two M3x3 set...

Prusa MINI Extruder Driven Gear (Filament Spur) Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI and Mini+. This is the driven/idler gear pushing the filament inside the extruder assembly. Includes: Extruder Driven Gear...

Artillery - 420mm, 24 Pin FFP Cable for Extruder PCB  Board Runs from extruder adapter board to X axis adapter board  Includes: Cable (1 pcs) Length: 420mmPins: 24 Fits:GeniusGenius ProSidewinder X3 Pro  

  Flashforge Extruder Cable Runs from the mainboard to the extruder. Includes: Flat Cable (1 pcs) Fits:Creator 3Creator 3 ProGuider 2Guider 2S HTRobo E3 Pro

  Flashforge Extruder Cable Runs from the mainboard to the extruder assembly. Includes: Flat cable (1 pcs) Fits:FinderFinder 2Inventor 2

Extruder FFC Cable Runs from X axis PCB adapter board to extruder PCB adapter board.  Includes: Cable (1 pcs)   Length: 500mmPins: 24 Fits: Sidewinder X2Sidewinder X3 Plus

PB Select™ Extruder Drive Gear Set (Plated Hardened Steel) for K1, K1C, K1 Max All metal, DLC coated, hardened steel filament drive gears.  Includes: Drive gear (2 pcs)Shoulder bolt (2 pcs) Fits:Creality K1Creality K1CCreality K1 Max

Creality Extruder Gear Also called the filament drive gear. Includes: Brass gear (1pcs) Please Note: Does not include set screws, available here. Fits:CR-5CR-5SCR-7CR-8SCR-9SCR-10miniCR-10CR-10SCR-10 S4CR-10...

R1+ Extruder Hardware Kit  This includes the screws, nuts, bolts washers and springs needed for your R1+ extruder. Note: Does not include hobbed bolt, Axle Shaft or Idler bearing. These will need to be purchased separately. Fits: Robo R1+

PB Select™ Idler Springs for Prusa Extruder Latch & MMU2S/3 Includes: Idler spring (2 pcs) Fits:MK2.5MK2.5SMK3MK3SMK3S+MiniMini+MMU2SMMU3 To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

Robo Extruder Latch  Includes:  Latch (1 pcs) Fits:Robo R1Robo R1+

Robo Extruder Latch Spring  Includes: Spring (1 pcs) Fits: Robo R2Robo C2

  Flashforge Extruder Lever Assembly - Left Side  Includes:Filament leverBacking plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt  (1 pcs)Spring  (1...

  Flashforge Extruder Lever Assembly - Right Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt  (1 pcs)Spring  (1 pcs)6mm...

Creality Filament Tension Lever (Extruder Lever) Also known as the extrusion clamp. Includes: Extruder Lever (1 pcs) Please Note: Mounting hardware not included Fits: Ender 2 Ender 3 Ender 3S Ender 5 CR 7 CR 100 CR 10 CR 10S CR 10 S4 CR 10 S5 CR 10...

  Extruder Mechanism - Filament Feeder This part contains the gears that drive the filament. It is also called a filament feeder or drive gear box.  Includes: Extruder Mechanism (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4 Note:...

Extruder Mechanism - Filament Feeder This part contains the gears that drive the filament. It is also called a filament feeder or drive gear box.  Includes: Extruder Mechanism (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 Plus

  Extruder Stepper Motor for MakerGear 3D printers Includes:1.8° stepper motor basePinion gear (installed) Fits:M2M3 Note: Does not include the 5.16:1 planetary gearbox.

Fysetc Extruder Motor for Prusa MK4 Includes: Motor (1 pcs) Fits: Prusa MK4

Mount for Extruder Stepper Motor and Uptown Board Includes: Motor mount (1 pcs) Fits:Robo R2Robo C2

Extruder Mounting Bracket (Plate) Includes: Bracket (1 pcs) Color: Blue Fits: GeniusSidewinder X1

Artillery Extruder Mounting Bracket (Plate) Includes: Bracket (1 pcs) Color: Turquoise  Fits:GeniusSidewinder X1

Extruder Mounting Bracket (Plate) Includes: Bracket (1 pcs) Color: Blue Fits: Genius ProSidewinder X2

  Flashforge Extruder PCB Board - Left Side For left side extruder only Includes: PCB Board (1 pcs) Fits: Creator 3 Pro

  Flashforge Extruder PCB Board - Left Side Includes: PCB Board (1 pcs) Fits: Creator 4 Note: For left side extruder only

  Flashforge Extruder PCB Board - Right Side For right side extruder only Includes: PCB Board (1 pcs) Fits: Creator 3 Pro

  Flashforge Extruder PCB Board - Right Side Includes: PCB Board (1 pcs) Fits: Creator 4 Note: For right side extruder only

  Flashforge Extruder PCB Board  Includes: Adapter board (1 pcs) Fits: Guider 3 Plus

  Flashforge Extruder PCB Board  Includes: Adapter board (1 pcs) Fits: Guider 3Robo E4 Pro

  Flashforge Extruder PCB Board Includes: PCB Board (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: For Left Side extruder only Right side extruder PCB board available here

  Flashforge Extruder PCB Board Includes: PCB Board (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: For right side extruder only Left side extruder PCB board available here

  Flashforge Extruder Board (Extruder Transfer Board) This is the top PCB board that the flat cable plugs into. It is also the X axis sensor. Includes: Transfer board/limit switch (1 pcs) Fits: Adventurer 3 Pro 2Adventurer 4 Pro

  Extruder Adapter (PCB Board) Includes: PCB Board (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4  

  Flashforge Extruder Adapter Board (PCB) Includes: Adapter Board (1 pcs) Fits: Finder 2

  Extruder PCB Board (Adapter Plate) Includes: PCB board (1 pcs) Fits:Sidewinder X2 Genius Pro

  Extruder PCB Board (Adapter Plate) Includes: PCB board (1 pcs) Version: 1.5 Fits: Sidewinder X1

Extruder PCB Board v1.7 (Adapter Plate) Includes: PCB Board (1 pcs) Version: 1.7 Fits: Genius

  Extruder Cover and Housing Includes:Housing (1 pcs)Top cover (1 pcs)Ceramic eyelets (2 pcs) Fits:InventorDreamerCreator Max Note: Mounting hardware not included

Planetary Gear Set Includes: Planetary gear (3 pcs) Fits: SV06SV06 Plus Notes:Bearings not included. It is recommended to grease the gears. You can find grease here.  

  Extruder PTFE Tube Includes: PTFE tube (1 pcs) Fits: 3DWOX 1DP200

Prusa MMU2S PTFE Tube  This is the replacement MMU2S-to-Extruder PTFE tube. Includes: PTFE tube (1 pcs) Specifications:Length: 360mm (tolerance +/- 0.4 mm)Inner diameter: 2 mmOuter diameter: 4 mm Fits:MK2.5 with MMU2SMK2.5S with MMU2SMK3 with...

  Flashforge Extruder Spring Includes: Spring (1 pcs) Length: 21.5mm Fits:Adventurer 3Adventurer 4Creator 3Creator 3 ProInventorInventor 2FinderFinder 2 Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NX Monoprice...

Artillery Extruder Spring Includes: Spring (1 pcs) Length: 12.5mm Fits:Sidewinder X1Sidewinder X2Genius Genius Pro

Creality Extruder Spring Includes: Spring (1 pcs) Fits: CR-03 CR-5 CR-5S CR-5 Pro CR-8S CR-10S Pro CR-10S Pro V2 CR-10 S5 CR-10 Max CR-100B CR-30 CR-2020 CR-2030 CR-3040 CR-3040 Pro CR-3040D CR-3040S CR-5060 CR-5060 pro CR-5080 CR-6080 CR-6080S CR-X Pro...

Creality Extruder Stepper Motor Includes: 42-40 Stepper Motor (1 pcs) Brass Filament Drive Gear (1 pcs) Fits:  Ender-3 Ender-4 CR-6 SE CR-6 Max CR-10 V2

  Flashforge Extruder Stepper Motor Includes: Motor (1 pcs) Location: left or right extruder Fits: Creator 3

Extruder Stepper Motor Includes: Stepper motor with gear (1 pcs) Fits: SV06SV06 PlusSV07SV07 Plus

Artillery CNC Machined Aluminum Extruder Lever Includes: Aluminum lever (1 pcs) Fits: Sidewinder X1Sidewinder X2GeniusGenius ProHornet

Artillery Extruder Filament Tension Lever  Includes: Tension Lever (1 pcs)  Fits: Sidewinder X1Sidewinder X2GeniusGenius ProHornet Note: This is a polymer (plastic) lever, click here for the metal version of this lever.

  Flashforge Extruder Cable This cable is about 6 feet long and runs from mainboard to the extruder adapter board. Includes: Cable (1 pcs) Fits: Creator 4