Printer Parts

  Flashforge Build Plate Frame This is the frame that holds the magnetic base in place. Includes: Plastic frame (1 pcs) Fits: Adventurer 4 Notes: This frame will not work with the glass bedMounting hardware not included Little...

  Flashforge Build Plate Glass Glass only, does not include build tape. However, you can print directly on clean glass if you want your prints to have a glassy bottom. Includes: Glass build plate (1 pcs) Fits:FinderFinder 2

  Flashforge Glass Build Plate Includes: Glass build plate (1 pcs) Dimensions: 310x270x3mm Fits:Guider 2S HTGuider 2 with plastic housing upgradeRobo E3 Pro Note: If you are installing this glass on a Guider 2 you will need to...

  Flashforge Build Plate Heater Includes: Magnetic bed with heater (1 pcs) Voltage: 110 VAC Fits: Creator 3 Pro Scroll down for instruction video

Flashforge Build Plate Heater for Removable (Flexible) Print Surface This aluminum heater goes under build plate. Includes: Build plate heater (1 pcs)  Size: 164*168mm Note: Only fits printers with removable print bed...

Build Plate Heater for Glass Print Surface This aluminum heater goes under glass build plate. Includes: Heater plate (1 pcs)  Note: Only fits printers with glass print bed. Does not fit printers with removable...

Build Plate Heater for Flashforge Adventurer 3 Pro 2 Includes: Heater (1 pcs) Fits: Adventure 3 Pro 2

Build Plate Heater for Flashforge Adventurer 4 Pro Includes: Heater (1 pcs) Fits: Adventure 4 Pro

Build Plate Heater for Flashforge Adventurer 4 Includes: Heater (1 pcs) Fits: Adventure 4

Build Plate Heater Includes: Heater (1 pc)Magnet - Installed (1 pc) Fits: Adventure 5MAdventure 5M ProRobo E4

  Flashforge Build Plate Heater Includes: Heater with wire & connector (1 pcs) Fits: Creator 3

Build Plate Heater for Flashforge Finder 3 Includes: Heater Assembly (1 pcs) Fits: Finder 3Aries Note: Does not include magnet.

  Flashforge PCB Build Plate Heater Includes: PCB heating board assembly (1 pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Build Plate Heater Includes: Silicone Heater (1 pcs) Fits: Guider 3 Plus

  Flashforge Build Plate Heater Includes: Silicone heater (1 pcs) Fits: Guider 3Robo E4 Pro

Build Plate Heater for SV06 Includes: Aluminum bed heater (1 pcs)Magnetic sheet - installed (1 pcs) Fits: SV06 Note: Does not include build plate/print surface or mounting hardware.

Build Plate Heater for SV07 Plus Includes: Aluminum bed heater (1 pcs)Magnetic sheet - installed on bed heater (1 pcs) Fits: SV07 Plus Note: Does not include build plate/print surface or mounting hardware.

Build Plate Heater for SV07 Includes: Aluminum bed heater (1 pcs)Magnetic sheet - installed on bed heater (1 pcs) Fits: SV07 Note: Does not include build plate/print surface or mounting hardware.

  Flashforge Build Plate Latch/Handle Includes: Plastic latch (1 pcs) Fits:Adventurer 3Monoprice VoxelRobo E3 Note: Screws not included

  Bed Leveling Sensor Switch Includes: Sensor (1 pcs) Fits:Adventurer 3 Pro 2Adventurer 4 Pro

  Flashforge Bed Leveling Sensor Switch Includes: Sensor (1 pcs) Fits: Creator 3 Pro

  Flashforge Bed Leveling Sensor Switch Includes:Sensor switch (1 pcs)Plastic housing (1 pcs) Fits: Creator 3 (with 3 wire switch) Note: Important! This is for the later version Creator 3 which has the 3 wire switch. If your current switch has...

  Flashforge Bed Leveling Sensor Switch Includes: Sensor (1 pcs)Sensor bracket (1 pcs) Fits: Creator 4

  Flashforge Bed Leveling Sensor Switch Includes: Sensor (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro 

  Flashforge Build plate Tray This is the tray that the build plate slides into.  Includes: Tray (1 pcs) Fits: FinderFinder 2

  Flashforge Build Plate Bearing Guide Tape - 2 pack This is the clear tape that goes under the built plate tray which the bearing rides on.  Includes: Tape (2 pcs) FitsAdventurer 3Robo E3MP Voxel

  Extra FlexPlate Note: This is not the Complete Builtak Flexplate System. This is the FlexPlate only and requires a magnetic mounting base and print surface. - Specially-coated FlexPlates are resistant to rust and work on...

Extra FlexPlate Please Note: This is not the Complete Builtak Flex System. This is the FlexPlate only and requires a magnetic mounting base and print surface. Specially-coated FlexPlates are resistant to rust and work on both heated...

  Replacement BuildTak FlexPlate for Robo R2 Flexplate System Includes: FlexPlate (1 pcs) Size 9x9in Fits: Robo R2 Please Note: This is not the Complete Builtak FlexPlate System. This is an individual replacement...

  BuildTak FlexPlate System The original magnetic build surface and still one of the best available.  Benefits:Easy print removalBetter adhesion of prints with the BuildTak print surfaceSwap flexplates when a print is finished for more...

BuildTak FlexPlate System Size: 165x165mm (6.5x6.5in) Includes:  Original BuildTak print surface (1 pcs) Spring steel sheet (1 pcs) Magnetic base (1 pcs) Fits:  Ender 2 printers with a 165x165 print bed

BuildTak FlexPlate System Size: 235x235mm (9.25x9.25in) Includes:  Original BuildTak print surface (1 pcs) Spring steel sheet (1 pcs) Magnetic base (1 pcs) Fits:  Ender 3 printers with a 235x235 print bed

Robo R2/C2 Bushing Block  Also known as the carriage bracket Includes: Bushing block (1 pcs) Fits:Robo R2Robo C2  Use with R2/C2 Bushings Note: Once installed, it is not possible to remove the bushing blocks without damaging them. 

  Button for Touch Screen Includes: Plastic button (1 pcs) Fits:FinderFinder 2Inventor 2Guider 2Guider 2S HTRobo E3 Pro

  C-Clip for Y Axis Bearing Includes: C-Clip (1pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro Note: Each bearing requires 2 clips, be sure to order the quantity you need.  

Hotend Heater Cable - Uptown to Downtown Board Connects: P3 Extr 1 out on Uptown Board to P9 extr1 on Downtown Board Includes: Cable (1 pcs) Fits: R2C2

Ribbon cable for Robo C2 Runs from mainboard to extruder assembly.  Includes: Cable (1 pcs) Fits: C2

  Cable for Flashforge Core Board This is the flat ribbon cable that runs from the Driver Board to the Core Board on some older Flashforge 3D printers Includes: Flat cable (1 pcs) Fits: Older Flashforge printers that utilize the Core Board...

PB Select™ Heat Bed Power Cable This is the cable that runs from the mainboard to heated bed on the Prusa MINI and MINI+ Includes: Cable (1 pcs)Terminal block plug (1 pcs) Specs:Wire: 16 awgLength: 18 inches (approximately)Ring terminals:...

PB Select™ Heatbed to Einsy power cable for Prusa (screw-attached type) Runs from mainboard to heated bed.  Includes: Cable (1 pcs) Fits:MK3MK3SMK3S+ Note: Attachment screws not included To replace this part, please consult...

PB Select™ Heat Bed Power Cable This is the cable that runs from the Mainboard to the heated bed on Prusa MK2 series Note: ONLY compatible with the heated beds with detachable power cable. NOT compatible with heated beds where the power cable is...

Mainboard to Uptown Board Wire (cable) This cable runs from the C2 mainboard to the extruder heater connection on the uptown board. Includes: Cable (1 pcs) Fits: C2

Prusa IR Filament Sensor-Einsy Cable Runs from filament sensor to mainboard. Includes: Cable (1 pcs) Fits: MK3 To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

PB Select™ Cable for IR Filament Sensor to Einsy Board Runs from filament sensor to mainboard. Includes: Cable (1 pcs) Fits:MK3SMK3S+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

Prusa IR Filament Sensor-Einsy Cable Runs from filament sensor to mainboard. Includes: Cable (1 pcs) Fits:MK3SMK3S+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer...

Cable - IR Sensor to Downtown Board For connecting IR Bed Level Sensor to Downtown Board  Includes: Cable (1 pcs) Fits: Robo R2Robo C2

   REFURBISHED PART  - Removed from a low hour Dreamer.  Flashforge Hotend Cable Includes: Cable (1 pcs) Location: Left hotend to mainboard. Fits:InventorDreamer Note: This does not include the extruder...

   Used Part  - Removed from a low hour Dreamer.  Flashforge Hotend Cable Includes: Cable (1 pcs) Location: Left hotend to mainboard. Fits:InventorDreamer Note: This does not include the extruder motor...

PB Select™ PSU to Einsy Power Cable We use premium pure copper wire, tin plated copper connectors and adhesive heat shrink for a good quality long lasting cable. Includes: Power cable (1 pcs) Specs:Wire: 16 AWGLength: 18 inches...

 Used Item  Cables are removed from low hour 3D printers. Flashforge PSU to Mainboard Power Cable Includes: Power cable (1 pcs)Ferrite filter (1 pcs) Fits: Creator Pro 2Creator Max 2

 Used Item  Cables are removed from low hour 3D printers. Flashforge PSU to Mainboard Power Cable Includes: Power cable (1 pcs) Fits: Creator Pro 

 Used Item  Cables are removed from low hour 3D printers. Flashforge PSU to Mainboard Power Cable Includes: Power cable (1 pcs)Terminal block plug (1 pcs) Length: 14 inches (approximately) Fits:DreamerDreamer NX

PB Select™ PSU to RAMBo Mini Power Cable We use premium pure copper wire and premium connectors for a good quality long lasting cable. Includes: Power cable (1 pcs) Note: This is only one cable. The printer needs 2 cables to run from the...

Prusa PSU-Einsy Power Panic Cable This is a replacement PSU to Einsy power panic cable. It is ONLY compatible with the black housing PSU. Includes: PSU-Einsy power panic cable (1 pcs) Fits:MK3MK3SMK3S+ To replace this part, please...

   Used Part  - Removed from a low hour 3D Printer  Flashforge Hotend Cable Includes: Cable (1 pcs) Location: Right hotend to mainboard. Fits:InventorDreamer Note: This does not include the extruder...

SD to RAMPs cable Connects SD card reader to RAMPs board. Includes: Cable (1 pcs) Fits:Robo R1Robo R1+

Bondtech PC2510 to JST-XH6 Cable PC2510 4-pin connector to JST-XH6 6-pin connector. This cable is by default wired for the Bondtech 40mm geared Nema17 motor. Please make sure that it follows the schematics for your application. Controller side ...

Extension Cable, Stepper Motor to Dupont 4 (No Latch). Approximately 1 meter long Nema 17 stepper motor 6-pin connector to Dupont 4-pin connector. The default wiring for this extension cable is listed below. You may need to switch the...

Extension Cable, Stepper Motor to Dupont 4 (No Latch). Approximately 1 meter long Nema 17 stepper motor 6-pin connector to Dupont 4-pin connector. The default wiring for this extension cable is listed below. You may need to switch the...

Bondtech JST-XH4 Cable JST-XH4 4-pin connector to JST-XH6 6-pin connector. This cable is by default wired for the Bondtech 40mm geared Nema17 motor. Please make sure that it follows the schematics for your application. Controller side   ...

Extruder Motor Cable for Robo R2 and C2 3D Printers Includes: Cable (1 pcs) Fits: R2C2

PB Select™ Prusa V-Cable Adapter MK2.5 Noctua Reduction Cable. Needed to install the a 3 wire fan on the MK2.5 and MK2.5S

   Used Item  Cables are removed from low hour 3D printers. Flashforge X Axis Limit Switch (Endstop) Cable Includes: Cable ( 1 pcs) Length:1100mm Fits:Creator ProCreator MaxDreamerDreamer NXInventor

  Flashforge X Limit Switch (Endstop) Cable Runs from X axis limit switch to mainboard Includes: Cable (1 pcs) Fits:FinderFinder 2Inventor 2

  Flashforge X Limit Switch Cable (Endstop Cable)  Runs from X axis limit switch to mainboard Includes: Cable (1 pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Cable - X Axis Stepper Motor Includes: Cable (1 pcs) Fits:Adventurer 3Monoprice VoxelRobo E3  

Flashforge Creator Pro X Motor Cable Runs from the X axis motor to the mainboard Includes: Cable ( 1 pcs) Fits: Creator Pro

  Flashforge Y Motor Cable Runs from Y axis motor to mainboard Includes: Cable (1 pcs) Fits: Creator Pro 2Creator Max 2

   Used Item  Removed from low hour 3D printer. Flashforge Y Motor Cable Runs from Y axis motor to mainboard Includes: Cable (1 pcs) Fits: Creator Pro 2Creator Max 2

  Flashforge Y Motor Cable Runs from Y axis motor to mainboard Includes: Cable (1 pcs) Fits: Creator Pro

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Y Motor Cable Runs from Y axis motor to mainboard Includes: Cable (1 pcs) Fits: Creator Pro

Z Endstop Cable Includes: Cable (1pcs) Fits: Robo C2

  Flashforge Z Motor Cable Runs from Z axis motor to mainboard Includes: Cable (1 pcs) Fits: Creator Pro 2Creator Max 2

   Used Item  Removed from low hour 3D printer. Flashforge Z Motor Cable Runs from Z axis motor to mainboard Includes: Cable (1 pcs) Fits: Creator Pro 2Creator Max 2

  Flashforge Z Motor Cable Runs from Z axis motor to mainboard Includes: Cable (1 pcs) Fits: Creator Pro

Z Motor Cable This cable is for the R2, but also works for the C2 and R1/+ Includes: Cable (1 pcs) Length: 600mm Fits: R2C2R1/+

  Flashforge Extruder PCB Cable - Left This cable runs form the extruder to the mainboard. Includes: Cable (1 pcs) Fits: Creator Pro 2 (left extruder)Creator Pro Max (left extruder)

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Extruder PCB Cable - Left This cable runs form the extruder to the mainboard. Includes: Cable (1...

  Flashforge Extruder PCB Cable - Right This cable runs form the extruder to the mainboard. Includes: Cable (1 pcs) Fits: Creator Pro 2 (right extruder PCB)Creator Max 2 (right extruder PCB)

   Used Item  Cables are removed from low hour 3D printers. Flashforge Extruder PCB Cable - Right This cable runs form the extruder to the mainboard. Includes: Cable (1 pcs) Fits: Creator Pro 2 (right extruder...

Cable for Auto Bed Leveling Sensor (ABL) Includes: Cable (1 pcs) Fits:Sidewinder X2Genius Pro

Cable for Accelerometer Includes: Cable (1 pcs) Fits: Sovol SV07Sovol SV07 Plus

Universal BLTouch Cable - 1 Meter This is one long cable that plugs directly into the BLTouch and eliminates the additional joints created when using other BLTouch extension cables. Comes standard with BLTouch connector on one end and a Dupont 3 pin...

Universal BLTouch Cable - 1.5 Meter This is one long cable that plugs directly into the BLTouch and eliminates the additional joints created when using other BLTouch extension cables. Comes standard with BLTouch connector on one end and a Dupont 3 pin...

Universal BLTouch Cable - 2 Meter This is one long cable that plugs directly into the BLTouch and eliminates the additional joints created when using other BLTouch extension cables. Comes standard with BLTouch connector on one end and a Dupont 3 pin...

  Cable for Chamber Camera Includes: Cable (1 pcs) Fits: Adventurer 5M Pro

  Flashforge Door Sensor Cable Includes: Cable (1 pcs) Fits: Inventor 2 Note: This is the cable only. Does not include the sensor.

LED Cable Connects from extruder board to extruder LED board Includes: Cable (1 pcs) Fits: SV07SV07 Plus

  Flashforge Extruder Motor Cable Includes: Cable (1 pcs) Fits: Creator MaxDreamerInventor

  Flashforge Extruder Motor Cable Includes: Cable (1 pcs) Fits: Creator MaxDreamerInventor

  Flashforge Extruder Motor Cable Includes: Cable (1 pcs) Fits: Creator Pro

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Extruder Motor Cable Includes: Cable (1 pcs) Fits: Creator Pro

  Flashforge Extruder Motor Cable Includes: Cable (1 pcs) Location: Right side motor Fits: Creator MaxDreamerInventor    

  Used Item  Cables are removed from low hour 3D printers. Flashforge Extruder Motor Cable Includes: Cable (1 pcs) Location: Right side motor Fits: Creator MaxDreamerInventor    

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Extruder Motor Cable Includes: Cable (1 pcs) Plug Color: White Fits: Creator Pro

  Flashforge Extruder Motor Cable Runs from extruder motor to mainboard.  Length: 62cm Includes: Cable (1 pcs) Fits: Adventurer 3Adventurer 4Monoprice VoxelRobo E3

  Flashforge Extruder Motor Cable Includes: Cable (1 pcs) Fits: Dreamer NX

Cable for Extruder Motor  Runs from extruder motor to mainboard of Robo R1+  Includes: Cable (1 pcs) Fits: Robo R1+Robo R1

Cable for Extruder Motor Short cable (wire harness) that runs from the extruder motor to the extruder PCB board. Includes: Cable (1 pcs) Fits:Sidewinder X2Genius Pro

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Hotend Temperature Sensor Cable Runs from the thermocouple (thermistor) to the mainboard. Includes: Cable...