Robo C2

Robo Z Axis Linear Bearing Includes: Bearing (1 pcs) Specifications:ID: 12mmOD: 21mmL: 57mmF: 32mm Fits:Robo R2Robo C2     

Linear Rod - 8mm x 283mm G6 high precision, HRC62 Hard Chrome Plated, Gcr15 steel, smooth linear rods for the outer X/Y axis of the Robo C2.  Includes: Rod (1 pcs) Fits: Robo C2 X/Y Axis

Stainless Steel Linear Rod - 6mm x 261mm These rods are for the inner X/Y axes that the extruder carriage rides on. Includes: Rod (1 pcs) Fits: Robo C2 X/Y Axis

Stainless Steel Linear Rod - 8mm x 283mm  Includes: Rod (1 pcs) Fits: Robo C2 X/Y Axis

M2.3x6mm Blunt Nose, Pan Head Screw Set Includes: Screws (2 pcs) Head: PanSize: M2.6Length: 6mmType: Blunt nose

NEMA17 Stepper Motor Mount Includes: Motor mount (1 pcs) Fits: C2

Noga Teddy Burr - TB1000 Deburring tool (3D Print Cleanup Tool) The TB1000 is a high quality deburring tool with 8 mm painted hexagonal aluminum handle and N1 blade. Great for post production of 3D prints. Blade is replaceable. The Teddy Burrs has...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Raspberry Pi Power Cable This is the cable that runs from the mainboard to the Raspberry Pi. It is a little shorter then the stock R2 cable, but will reach with slightly less excess wire. Includes: Cable (1 pcs) Fits:Robo R2Robo C2

Power Supply Includes:Power supply unit (1 pcs)Cable (1 pcs) Voltage: 19 VDC Fits: Robo C2

3D Print Cleanup Tool - RB1000 Deburring Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as...

Ribbon Cable - Uptown to Downtown Board  Includes: Cable (1 pcs) Fits:Robo R2Robo C2

HDMI Cable Board-to-LCD connection cable Includes: Cable (1 pcs)  Length: 24 cm Fits:Robo R2Robo C2    

  Microswiss Wear-Resistant Nozzle with M6 Threads This M6 thread, Robo 3D style nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers...

*Clearance item, no returns Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

Robo R2/C2 Rubber Feet  Includes: Rubber foot (2 pcs)Installation pins (2 pcs) Fits: Robo R2Robo C2

Robo C2 Spacer - 8x10x25 Includes: Spacer (1 pcs) Size:ID: 8mmOD: 10mmLength: 25mm Fits: C2

Robo C2 Spacers - 8x10x28 Includes: Spacers (5 pcs) Size:ID: 8mmOD: 10mmLength: 28mm Fits: C2

Robo C2 Spacers - 8x10x5 Includes: Spacers (3 pcs) Size:ID: 8mmOD: 10mmLength: 5mm Fits: Robo C2

Spool Holder for Robo C2 Includes: Spool holder (1 pcs) Total length: 4.95 inchesHolds up to: 4.60 inch spool Fits: C2