Tools & Supplies

Push Fit Connector Contains 4 push fit connectors  PC4-01 for 4mm PTFE tube These connectors have a stop point, so the PTFE tube will not pass all the way through. 

3D Print Cleanup Tool - RB1000 Deburring Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as...

PB Select™ Hardware Kit Includes:M3x16 - fan to fan duct (4 pcs)M3x10 pan head - to clamp heater (2 pcs)M3x4 set screw for thermistor (2 pcs)M2 hex wrench (1 pcs)M1.5 hex wrench (1 pcs) For:E3D V6 Prusa MK2, MK3 SeriesRepRap

*Clearance item, no returns Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

Rolson 59104 6 pc Stainless Steel Tweezers Includes: 160mm slide lock tweezer (1 pcs)160mm tapered point tweezer (1 pcs) 120mm fine point tweezer (1 pcs)160mm cross action straight tweezer (1 pcs)160mm curved tip tweezer (1...

Screwdriver PH2 Screwdriver with a PH2 head. PH2 is the recommended standard for the screws used on Original Prusa Printers. Includes: Screwdriver (1 pcs) Specifications:Red Hand: PlasticScrewdriver length L1: 160 mmShank length...

Jonah designed this SD card guide to make the card reader on our Mosaic Palette+ a little easier to access. The STL file is free, but you will need to create an account to download it. If you print it, let us know! We love to see your photos and hear...

M4X5 Set Screw 12.9 Grade, Flat Point. Includes: Set Screw (1 pcs)   Fits: BLTouch Uses 2mm Hex Key Driver

M3x2 Set Screw for Bondtech Extruder M3x2 set screw for primary gear with inner diameter of 5mm. Hard 12.9 Grade for durability. Sold in pack of 5    

M3x3 Set Screw Includes: Set screw (5 pcs) 12.9 GradeCup point

M3x4 Set Screw (Grub Screw) Includes: Set screw (5 pcs) Size: M3x4mmGrade: 12.9Head Type: Hex Fits heater block of:E3D V6Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL Note: These are hex head set screws, not torx head (torx head is...

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL

M4X3 Set Screw 12.9 Grade Sold in a 4 pack    

M4x3 Set Screw for Bondtech Extruder M4x3 for primary gear with inner diameter of 8mm. 12.9 Grade Sold in units of one  

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

M4X4 Set Screw  12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)

M4X5 Set Screw 12.9 Grade Flat Point Uses 2mm Hex Key Driver Sold in units of one.    

3D Print Removal Tool - Small Scraper Small black scraper for removing small prints and purge lines. Includes: Scraper (1 pcs) Length: 136mmBlade width: 32mm Please Note: This is the latest version from Artillery with a very thin...

Small Spool Roller for Artillery Sidewinder X2 This file was designed by James I. Click here to read more about the spool holder and to download the STL file.   Licensed under a Creative Commons Attribution-ShareAlike 4.0 International...

L Shaped Socket Wrench Size: 10 mm Includes: Wrench (1 pcs)