Tools & Supplies

Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)

PB Select™Heat-Set Insert Soldering Iron Tips These soldering iron tips are used for installing heat-set inserts into plastic objects.  Tip Type: T18 compatible Fits: HAKKO FX888D soldering ironOther soldering Irons that use a T18...

Heater Cartridge for Bondtech LGX Artillery Replacement 24v 50W heater for LGX Mosquito For Sidewinder. Includes: Heater cartridge (1 pcs) Fits the following Artillery printers:Sidewinder X1Sidewinder X2With the following Bondtech print...

Bondhus HexEnd L Wrench with BriteGuard Finish Size: 2mmLength: 50mmBrand: BONDHUS Note: May not come with red display card shown in picture Made in the USA

Bondhus HexEnd L Wrench with ProGuard Finish Size: 2mmLength: 50mmBrand: BONDHUS Note: May not come with red display card shown in picture Made in the USA

L-Shape Hex Wrench Size: 1.5mmLength: 78.5mmBrand: BONDHUS Made in the USA

  Hex Wrench (L Wrench) Includes: Hex wrench (1 pcs) Size: 3.0mm

  Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.0mm 

PB Select™ Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.5mm

Hotend Cable Guide for R1 Guides the hotend heater and thermistor cable When installing, rotate your hotend 90 degrees so the wires face the front of the printer. Designed by: Bob R.  

CNC Kitchen Installation Tips for Heat Set Inserts Compatible with soldering irons that use T18 and M900 standard like Hakko, Lonovo, Sremtch. Includes:Tip - M2/M2.5 (1 pcs)Tip - M3 (1 pcs)Tip - M4 (1 pcs)Tip...

CNCKitchen Installation Tips Set for Short and Standard Threaded Inserts. Tips for easy installation of both short and standard threaded inserts. Includes:Tips for TS100 adapter (6 pcs)TS100 adapter (1 pcs) Specifications:Compatible with TS100,...

Heat Resistant Kapton Tape Use this tape to secure the insulation to your Flashforge heater block. Includes: Tape roll (1 pcs) Width: 5mm Length: 33 meters

The STL file is free, but you will need to create an account, add to cart and "check out" to download it. Jonah designed this key ring separator to make taking keys (& other things) on and off key rings a little easier.  USB drive not included,...

  Liquid Glue for Build Plate (Print Bed Adhesive) Includes: 60mL print bed glue (1 bottle) Works with: ABS, PLA, PETG, ASA, PET, TPU Material Safety Data Sheets Instructions Apply pressure to the applicator head to open...

Prusa Lubricant Applicator Set Includes: Lubricant 5g (1 pcs)Applicator (1 pcs) After a certain period of time (see the 3D Printing Handbook), your printer should be cleaned and greased in order to work properly.  No need to apply...

Bambu Lab Lubricant Grease Lubricant Grease is used to lubricate lead screws, or to eliminate noise issues between belts and idle pulleys.  Includes: - Lubricant Grease (6 pcs) Learn more about the Lubricant Grease...

Bambu Lab Lubricant Oil Lubricant Oil is typically used for the lubrication of linear guides, slide rails, and steel shafts. Theoretically, Lubricant Oil can also be used for lead screw lubrication, but since Lubricant Oil is prone to...

Prusa Lubrication set   Lubrication set for linear rails (3-6 months interval). Includes: Lubricant 5g (1 pcs)Applicator (1 pcs) After a certain period of time (see the 3D Printing Handbook), your printer should be cleaned...

M2 Brass Thread Insert - 4 Pack Thread Size: M2 OD: 3mm Length: 3mm Recommended hole diameter: 2.9 mm Includes: 4 thread inserts For easy installation use the Heat-Set Insert Soldering Iron Tips