Bambu Lab

Fully Assembled High Flow ObXidian™ Hotend for Bambu Lab X1 and X1C Series E3D & Bambu Lab ObXidian High Flow hotends are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, more...

Extruder Filament Sensor for P1 Series This sensor is used in the Extruder to detect the presence of the filament, and also detect the Filament Cutter lever. Includes:Extruder Filament Sensor (1 pcs)Screw BT2*5 (2 pcs)Glue (1 pcs) Fits: Bambu...

Extruder Filament Sensor for X1 Series This sensor is used in the Extruder to detect the presence of the filament, and also detect the Filament Cutter lever. Includes:Extruder Filament Sensor (1 pcs)Screw BT2*5 (2 pcs)Glue (1 pcs) Fits: Bambu...

Extruder Interface Board for P1 Series The Extruder Interface Board is an auxiliary board of the TH board, and it is used to expand the interface of functional components, such as the hotend and extruder unit. Includes: Extruder Interface Board...

Extruder Interface Board V9 - X1C Extruder Interface Board V9 is the part of the tool head board where the print head wires are connected. It's also connected to the main TH board V9 and it's only compatible with V9 version of the TH board...

Extruder Motor The extruder motor is installed on the toolhead and used to drive the movement of the extruder. It is a 36-series circular stepping motor. Includes: Extruder Motor (1 pcs)Glue (1 pcs) Fits: Bambu Lab P1 SeriesBambu lab X1...

  Bambu Lab Filament Buffer for X1 and P1 Series Printers The Filament buffer is an accessory that is required in conjunction with a single AMS unit. Its function is to provide a buffering effect for the filament. The interface is 4-Pin cable with...

Bambu Lab Filament Buffer Connection Board The filament buffer connection board is located inside the AMS filament buffer and is equipped with a Hall sensor. It monitors the filament loading status by detecting the position changes of the buffer...

Filament Cutter - 3 Pack Replacement filament cutter. The filament can be cut to prevent the system from clogging. When used with AMS, it assists with multi-material switching. Includes: Filament Cutter (3 pcs) Fits: Bambu...

Bambu Lab Filament Cutter Lever for the X1 Series and P1 Series Printers The filament cutter lever is used for holding the cutter and pushing it to cut filaments. Includes: Filament Cutter Lever (1 pcs)Screw (1 pcs)Shaft...

Filament Sensor for Bambu Lab A1 Series Printers The Filament Sensor is used to detect the filament feeding status to help prevent print failures and improve overall printing efficiency. Includes:Filament Sensor (1 pcs)Screw BT2*5 (2...

  DiamondBack FlowTech™ Nozzles The collaboration between Microswiss and DiamondBack introduces the most advanced nozzle to the FlowTech ecosystem. This nozzle features a proprietary Polycrystalline Diamond (PCD) insert, developed after 40...

FlowTech™ Replacement Heater Core This is a spare Heater Core for Microswiss FlowTech™ Hotend model: M3109P. Includes: Heater core (1 pcs) Voltage: 24v Fits: Bambu Lab P1P (with FlowTech)Bambu Lab P1S (with FlowTech)

FlowTech™ Replacement Heater Core This is a spare Heater Core for Microswiss FlowTech™ Hotend model: M3109X. Includes: Heater core (1 pcs) Voltage: 24v Fits:Bambu Lab X1 (with Flowtech Hotend)Bambu Lab X1C (with Flowtech Hotend)

FlowTech™ Heatsink for Bambu Lab X1 and P1 This is a Microswiss FlowTech™ Heatsink for Bambu Lab X1 and P1 Printers. It is compatible only with Microswiss FlowTech hotend models M3109X and M3109P. Includes:Aluminum Heatsink (1...

FlowTech™ Hotend for Bambu Lab P1 This hotend kit comes with a 0.40mm nozzle, plug-and-play heater core/thermistor and is fully compatible with the Bambu Lab P1P/P1S 3D Printers. Stock z-height, build volume and firmware remains unchanged...

FlowTech™ Hotend for Bambu Lab X1 This hotend kit comes with a 0.40mm nozzle, plug-and-play heater core/thermistor and is fully compatible with the Bambu Lab X1/X1C 3D Printers. Stock z-height, build volume and firmware remains unchanged...

Silicone Socks for Bambu Lab printers A pack of 3 high temperature non-stick silicone socks for FlowTech™ hotend model: M3109. Includes: Silicone sock (3 pcs) Color: Black Fits:Bambu Lab X1 (with Flowtech Hotend)Bambu...

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Front Housing Assembly with Fan for Bambu Lab P1 Series Printers The Front Housing Assembly is mainly used to cool the printed part. Includes: Front housing assembly (1 pcs)Print cooling fan (1 pcs) Fits: Bambu Lab P1 Series Learn...