Tools & Supplies

Flange Screw This screw is usually used to hold a bead thermistor in the heater block. Includes: Flange screw (1 pcs) Size: M3x5mm

The STL file is free, but you will need to create an account to download it. This is v.2 with new features, including larger holes, back vent and a wider base Google Home not included. :) You will need to source the following parts: 1/4" x 1/8"...

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

3D Print Removal Tool - Scraper This is the model that comes with new Artillery printers. It can be used with any printer.  Includes: Scraper (1 pcs) Please Note: This is the latest version from Artillery and has a slightly...

 Important Shipping Notes  - Ships to the US and Canada only- Cannot be shipped to PO boxes- Drop ships directly from PrintDry, please allow an additional 3-4 day processing time- Ships from Canada- Only ships UPS/FedEx ground, no...

Adjustable Wire Stripper Includes: Wire stripper (1 pcs) We use these adjustable wire strippers in our shop when adding electronics to 3D printed items (like these battery adapters). We like to have a few around, each one set...

LAOA Automatic Wire Strippers  We use these in our shop and have been happy with the performance. Includes: Wire Stripper Tool (1 pcs) Specs:Adjustable: Strips 10-28AWG wire.  Wire stop for consistent strip lengthWire cutter

Anti Static ESD Grounding Bracelet Wear whenever working on the electronics of your 3D printer to reduce the risk of damage to sensitive components. Note: Always shut down and unplug your printer before working on it.

  Basics of 3D Printing with Josef Prusa   English Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d...

  Basics of 3D Printing with Josef Prusa   Spanish Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d.com...

18 volt Battery Adapter for Makita™ style tool batteries  3 amp maximum  (if you need to power something more than 3 amps, use a relay) Installed in the bottom of the adapter is a small "blinker board" (low voltage cutoff) to...

MilWalt Battery Adapter   3 amp maximum  (if you need to power something more than 3 amps, use a relay) This adapter fits both Milwaukee and DeWalt style batteries  On the underside of the adapter is a small "blinker board"...

Battery Low Voltage Protection "Blinker Board" - 10 amp Maximum Protects tool batteries from over discharge.  Maximum Amps: 10  if you need to power something that draws more than 10 amps (e.g Power Wheels), we recommend using the 3...

Fine Tip Blade for Edge Cleanup (Deburring) Tool This blade has a smaller tip than the blade that comes standard on the edge cleanup tool, allowing you to clean smaller areas, if needed. Includes: Blade (1 pcs) Note: This is the blade only,...

Replacement Blade for Edge Cleanup (Deburring) Tool Includes: Blade (1 pcs) Note: This is the blade only, the handle is not included. Buy the full tool here.  

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...

Bowden Tube Cutter for PTFE Tubing This handy little tool easily makes super clean cuts in PTFE tubing. Buy premium Capricorn PTFE tubing here.  

Bowden Tube Cutter for PTFE Tubing This handy little tool easily makes super clean cuts in PTFE tubing. Buy premium Capricorn PTFE tubing here.    

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

5 Amp DC-DC Buck Converter XL4015 Input voltage 4.0 ~ 38V Adjustable output voltage range 1.25V ~ 35V (Input voltage must be higher than the output voltage by 1.5V) Output current 4A recommended (up to 5A) Power indicator light Includes heat sink ...

Guider 2 Camera Bracket STL File  Printable camera bracket for Guider 2S/HT or for adding a camera to the Guider 2. Designed by NSC. Click here to download the STL file. Licensed under a Creative Commons Attribution-ShareAlike 4.0...

CD-20 Ceramic Screwdriver Used for adjusting stepper drivers and other electronics Tip Size: 1.8x0.4mm

Cover for Tool Battery Adapter  Fits: DeWalt compatible battery adapter only

Cover for Tool Battery Adapter  Fits: Makita compatible battery adapter        

Cover for Tool Battery Adapter  Fits: MilWalt battery adapter.

DC Power Cable with 5.5mm x 2.1mm Male Barrel Plug Specs Max current: 3A Red Connector: Center Pole Black Connector: Outer Pole Material: PVC Barrel Plug Size: 5.5 x 2.1mm Wire Length:100cm/39''(approx)    

Panasonic Automotive Relay 20A 24VDC 1 FORM A BRACKET Manufacturer: Panasonic Coil Voltage: 24 VDC Relay Contact Form: 1 Form A (SPST-NO) Contact Current Rating: 20 A Coil Resistance: 320 Ohms Coil...

DC Barrel Plug with Cord Plug: 5.5x2.1mm - Right Angle  Wire: 22AWG Wire Length: 1.5 Meter    

Adjustable DC-DC  Boost Converter XL6009 Module These boost converters are great to use in conjunction with our power tool battery adapters. Includes: XL6009 Converter (1 pcs) Specifications:Input Range: 3V - 32VOutput Range: 5V -...

DimaFix Pen  The DimaFix Pen provides an easy way to obtain the print bed adhesion you need. When heated above 60ºC, DimaFix provides a strong bond between your first layer and the build plate. DimaFix becomes inactive when cooled...

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

HARDMAN DOUBLE/BUBBLE 2 Part Epoxy - Very High Peel Strength - Orange This is the epoxy we use for attaching the magnets to the R1/+ glass print bed. Full curing time is stated to be 7 days. However, when applying magnets to the R1 glass bed, we...

Standard FEP Tube - Clear Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 2mm (± .1mm) Outside Diameter: 4mm Color: Clear Max Temp: 200°c This is nice quality...

Ferrite Core Anti-Interference Ring Includes: Ferrite ring (1 pcs) Fits wire up to 4mm

Ferrite Core Anti-Interference Ring  Sold in set of 5 Size: 9x5x5mm

 Important Shipping Notes  - Ships to the US and Canada only- Cannot be shipped to PO boxes- Drop ships directly from PrintDry, please allow an additional 3-4 day processing time- Ships from Canada - Only ships UPS/FedEx...

Small Phillips Head Screwdriver This is the small screwdriver that comes with the accessory kit of many new Flashforge 3D printers Includes: Screwdriver (1 pcs)

Plato 170 Flush Cut Wire Trimmers - 5in We find flush cutters like these are great for cleaning up 3D prints and are handy to have around the shop. Cuts 20 awg or smallerReturn spring for increased comfort during repetitive cuttingGreat for cutting...

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Fuse Pack Replacement fuses for Einsy and RAMBo boards Includes:15 amp blade fuse (1 pcs)5 amp blade fuse (2 pcs) Fits:Prusa Einsy for MK3/S/+Prusa RAMBo Mini for MK2/S & MK2.5/SUltiMachine EinsyUltiMachine RAMBo Mini

Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)

Heat-Set Insert Soldering Iron Tips These soldering iron tips are used for installing heat-set inserts into plastic objects.  Tip Type: T18 compatible Fits: PBX45S soldering IronHAKKO FX888D soldering ironOther soldering Irons that...

Heater Cartridge for Bondtech LGX Artillery Replacement 24v 50W heater for LGX Mosquito For Sidewinder. Includes: Heater cartridge (1 pcs) Fits the following Artillery printers:Sidewinder X1Sidewinder X2With the following Bondtech print...

Bondtech Heavy Duty Metal Push Fit Connector  All Metal For 4mm Tube Thread G1/8″  Note: If you are having trouble with the Bowden tube popping out, click here and go to the Bowden tube section

L-Shape Hex Wrench Size: 1.5mmLength: 78.5mmBrand: BONDHUS Made in the USA

  Hex Wrench (L Wrench) Includes: Hex wrench (1 pcs) Size: 3.0mm

  Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.0mm 

PB Select™ Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.5mm

Hotend Cable Guide for R1 Guides the hotend heater and thermistor cable When installing, rotate your hotend 90 degrees so the wires face the front of the printer. Designed by: Bob R.  

Heat Resistant Kapton Tape Use this tape to secure the insulation to your Flashforge heater block. Includes: Tape roll (1 pcs) Width: 5mm Length: 33 meters

The STL file is free, but you will need to create an account, add to cart and "check out" to download it. Jonah designed this key ring separator to make taking keys (& other things) on and off key rings a little easier.  USB drive not included,...

 Important Shipping Notes - Ships to the US and Canada only- Cannot be shipped to PO boxes - Drop ships directly from PrintDry, please allow an additional 3-4 day processing time- Ships from Canada- Only ships UPS/FedEx ground, no...

Henkel 60905 LOCTITE® 609™ Press Fit Retaining Compound - .5 mL (.02 oz) Capsule This is what MakerGear recommends for installing the pinion gear onto the extruder motor shaft of the M2/M3 3D Printers MSDS

Prusa Lubricant Applicator Set Includes: Lubricant 5g (1 pcs)Applicator (1 pcs) After a certain period of time (see the 3D Printing Handbook), your printer should be cleaned and greased in order to work properly. More information including...

M2 Brass Thread Insert - 4 Pack Thread Size: M2 OD: 3mm Length: 3mm Recommended hole diameter: 2.9 mm Includes: 4 thread inserts For easy installation use the heat-set insert soldering iron tip by Virtjoule

M2.5 Brass Thread Insert - 4 Pack Heat-Set or also called hot-melt thread inserts Size: M2.5 Diameter: 3.55mm Length: 4mm Recommended hole diameter: 3.10 mm For easy installation use the heat-set insert soldering iron tip by Virtjoule

M3 Brass Thread Insert - 4 Pack Size: M3 OD: 4.6mm Length: 5.5mm Recommended hole diameter: 4.0 mm For easy installation use the heat-set insert soldering iron tip by Virtjoule

M3 Brass Thread Insert - 4 Pack Size: M3 OD: 4.6mm Length: 5mm Recommended hole diameter: 4.0 mm For easy installation use the heat-set insert soldering iron tip by Virtjoule

PB Select™ M3 Stainless Steel Square Nuts These thin square nuts work in many applications that require a thinner (1.75mm) square nut. Including E3D Hemera Stepper Motors, Prusa Printers and Bondtech Extruders. Includes: Square Nut (10 pcs)...

M3 Leaf Spring T-Slot Nut (3030) Plated roll-in t-slot nut with leaf spring. Includes: M3 T-Slot nut with leaf spring (5 pcs) Size:(Measured by hand - sizes are approximate)Length: 19.5mmWidth: 12mmHeight: 6.5mm Fits: 3030 extrusion

M4 Brass Thread Insert - 4 Pack Size: M4 OD: 6mm Length: 5mm Recommended hole diameter: 5.25 mm For easy installation use the heat-set insert soldering iron tip by Virtjoule

M4 Leaf Spring T-Slot Nut Plated roll-in t-slot nut with leaf spring. Includes: M4 T-Slot Nut (1 pcs) Size:(Measured by hand - sizes are approximate)Length: 18.5mmWidth: 12mmHeight: 6.5mm Fits: Prusa XL (spool holder)

M5 Brass Thread Insert - 4 Pack Size: M5 OD: 7.5mm Length: 6mm Recommended hole diameter: 6.75 mm For easy installation use the heat-set insert soldering iron tip by Virtjoule

Bondtech M5x10 low head cap screw for Bondtech Extruders, to be used with the M5 thread inserts or similar. Sold in units of one

Black-coated M5x10 low head cap screw to be used with the M5 thread inserts or similar. Sold as a 5 pack

M6 Brass Thread Insert - 4 Pack Size: M6 OD: 9mm Length: 6mm Recommended hole diameter: 8mm For easy installation use the heat-set insert soldering iron tip by Virtjoule

Magigoo 3D Printing Adhesive Magigoo ensures strong adhesion to a hot print surface, but easy release when the print surface cools down.Non-toxic and easy to clean with water. Size: 120ml  Includes: Magigoo original (1 bottle) Works with:...

Magigoo 3D Printing Adhesive Magigoo ensures strong adhesion to a hot print surface, but easy release when the print surface cools down.Non-toxic and easy to clean with water. Size: 50ml  Includes: Magigoo original (1 bottle) Works...

Magigoo Original 3D Printing Adhesive Magigoo ensures strong adhesion to a hot print surface, but easy release when the print surface cools down.Non-toxic and easy to clean with water. Size: 10ml  Includes: Magigoo sample size (1 bottle) Works...

Magigoo Pro Flex 3D Printing Adhesive Magigoo PRO Flex is specifically designed for 3D printing flexible plastics. It offers a strong adhesion platform for thermoplastic elastomer copolymer based filaments and other flexible filaments whilst ensuring...

Magigoo Pro PA 3D Printing Adhesive Magigoo Pro PA is designed for professional use, to work with a wide number of PA types.The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off. Size:...

Magigoo Pro PC 3D Printing Adhesive Magigoo Pro PC is specifically designed for 3D printing polycarbonate plastics in FDM printers. It offers a very strong adhesion platform for polycarbonate based filaments. Such materials include pure Polycarbonate,...

Magigoo Pro PP 3D Printing Adhesive Magigoo Pro PP is designed to work with Polypropylene filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off if the included procedure...

  Spool Holder Includes: Spool holder (1 pcs) Color: Black Holds up to 5gk spoolsBearings for smooth feedingNone slip feetAssembly required

Brass Bristle Brush Great for nozzle cleaning

Stainless Steel Bristle Brush Great for cleaning hardened steel nozzles

Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...

PB Select™ Preset Torque Wrench  Includes:Preset Torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1 pcs)6mm socket (1 pcs)7mm socket (1 pcs)8mm socket (1 pcs) Notes:Use on a clean...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D Etc) 5.5 mm5.0 mm4.5 mm (Sidewinder X3 Pro/Max) Fits:E3D V6 Nozzles7mm RepRap NozzlesArtillery Sidewinder X3 Pro/MaxBondtech...

Nut Driver Size: 10 mm Includes: Nut driver (1 pcs)

Nut Driver Size: 6 mm Includes: Nut driver (1 pcs)

PBX45S Soldering Iron This soldering iron has an on/off switch on the handle and works great with the Heat-Set Insert Soldering Iron Tips by Virtjoile On/Off Switch: Yes Volts: AC110-120 Temperature range: 180-500c Heating...

PBX45S Soldering Iron  *Condition: Warehouse Damaged  These got damaged at the warehouse or during shipping from the factory. They are fully functional but have damage to the housing where the power cord exits the soldering iron...

Poly Prep Refill for Tech-Bond Polymer Bonding Kit Includes: 1.5 ounce bottle of Poly Prep (1 pcs)  

PolyDryer™  Includes: Dryer Dock (1 pcs)Storage Box (1 pcs)

PolyDryer™ Storage Box Includes: Storage Box (1 pcs) Note: Does not include the dryer base.

Tech-Bond Basic Poly Kit This is the best bonding system we have found for bonding 3D printed parts. It bonds everything, even Nylon and PTFE. We keep this around our shop and use it whenever we need to glue printed parts together. Kit Contains One...

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Note: Power supply is not included

Print Surface Applicator with Felt Please note: We include one of these free with every BuildTak Flexplate System.  Use this squeegee to remove air bubbles from you print surface as you apply it.  Has a harder squeegee side and softer felt...

PTFE Tube 2.5MM ID Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 2.5mm (±0.25mm) Outside Diameter: 4mm (±0.25mm) Color: White Max Working Temp:...

High Tamp PTFE Tube - Clear Includes: 3 meter PTFE tube (1 pcs) Inside diameter: 2mm (± .1mm) Outside Diameter: 4mm Color: Clear Max Temp: 260°c This premium high temperature PTFE tubing can withstand temperatures of up to 260°c. The...

Premium PTFE Tube - Orange Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 1.9mm Outside Diameter: 4mm Color: Orange Max Temp: 250°c This premium PTFE...

Standard PTFE Tube - White Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 2mm (± .1mm) Outside Diameter: 4mm Color: White Max Temp: 240°c This is nice quality PTFE...

  PTFE liners for Micro Swiss Direct Drive Kits and All Metal Hotend (Pack of 5) Capricorn PTFE liners for Micro Swiss Direct Drive Kits and All Metal Hotend for CR10 and Ender printers. Runs between the extruder and hotend. Includes: PTFE tube...

Push Fit Connector Contains 4 push fit connectors  PC4-01 for 4mm PTFE tube These connectors have a stop point, so the PTFE tube will not pass all the way through. 

PB Select™ Hardware Kit Includes:M3x16 - fan to fan duct (4 pcs)M3x10 pan head - to clamp heater (2 pcs)M3x4 set screw for thermistor (2 pcs)M2 hex wrench (1 pcs)M1.5 hex wrench (1 pcs) For:E3D V6Prusa i3RepRap

Screwdriver PH2 Screwdriver with a PH2 head. PH2 is the recommended standard for the screws used on Original Prusa Printers. Includes: Screwdriver (1 pcs) Specifications:Red Hand: PlasticScrewdriver length L1: 160 mmShank length...