Creality

Creality

creality-logo-100x.jpg

 

Use the filter box below to narrow down the Creality 3D Printer parts you are looking for:

  • 12x12 PEI BuildTak Build Sheet

    12x12 PEI Sheet - 2 Pack | BuildTak

    BuildTak

    $50.00
    BuildTak PEI Sheets - 12x12 Sold in pack of 2 sheets An ideal print surface for any 3D printer with a large 12x12 print bed. Manufactured right here in the USA to ensure consistent quality and composition, the BuildTak Polyetherimide (PEI) build...
    SKU:
    BTAK-PEI-12X12-2PK
    $50.00
  • 235*235 PEI BuildTak Build Sheet

    235x235 PEI Sheet - 2 Pack | BuildTak

    BuildTak

    $35.95
    Pack of 2 BuildTak PEI Sheets - 9.25"x9.25" (235x235mm) Manufactured right here in the USA to ensure consistent quality and composition, the BuildTak Polyetherimide (PEI) build surfaces are made from premium PEI equipped with the no-cleanup...
    SKU:
    BTAK-PEI-235X235-2PK
    $35.95
  • Micro Swiss All Metal Hotend Kit - CR10

    All Metal Hotend Kit for CR10/Ender/Tornado/X5S/U20 | Micro Swiss

    Micro-Swiss

    $63.50
    Micro Swiss All Metal Hotend Kit for CR-10/Ender/Tornado/X5S/U20 Kit includes 0.40mm nozzle  Key benefits: No printer modification needed - this kit is a drop-in replacement for the CR-10. Faster heat dissipation - Micro Swiss has...
    SKU:
    MS-AMHK-M2583-04
    $63.50
  • CR10 S Pro All Metal Hotend

    All Metal Hotend Kit for Creality CR-10S Pro | Micro Swiss

    Micro-Swiss

    $63.50
    Micro Swiss All Metal Hot End for Creality CR10S Pro Kit comes standard with a 0.40mm nozzle. Fits: CR-10s Pro CR-10s Pro V2 CR-10 Max  Key benefits of the Micro Swiss All Metal Hotend: A common complaint of the CR10S Pro is that it...
    SKU:
    MS-AMHK-M2591-04
    $63.50
  • CR10-S Pro Nozzle

    CR-10S Pro Brass Nozzle | 0.20mm

    PB Select

    $9.95
    Brass Nozzle for CR10S Pro Size: 0.20mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 
    SKU:
    PBX-NZL-CR10P-020
    Availability:
    Sold in units of 1
    Category:
    Nozzles
    Nozzle Size:
    0.20mm
    Fits:
    CR 10S Pro
    $9.95
  • CR10-S Pro Nozzle

    CR-10S Pro Brass Nozzle | 0.40mm

    PB Select

    $8.95
    Brass Nozzle for CR10S Pro Size: 0.40mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 
    SKU:
    PBX-NZL-CR10P-040
    Availability:
    Sold in units of 1
    $8.95
  • CR10-S Pro Nozzle

    CR-10S Pro Brass Nozzle | 0.60mm

    PB Select

    $8.95
    Brass Nozzle for CR10S Pro Size: 0.60mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 
    SKU:
    PBX-NZL-CR10P-060
    Availability:
    Sold in units of 1
    $8.95
  • CR10-S Pro Nozzle

    CR-10S Pro Brass Nozzle | 0.80mm

    PB Select

    $8.95
    Brass Nozzle for CR10S Pro Size: 0.80mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 
    SKU:
    PBX-NZL-CR10P-080
    Availability:
    Sold in units of 1
    Category:
    Nozzles
    Nozzle Size:
    0.80mm
    Fits:
    CR 10S Pro
    $8.95
  • Creality CR-10s Pro nozzle

    CR-10S Pro Nozzle - For Original Hotend (M6x.75mm Threads) 0.40mm | Micro Swiss

    Micro-Swiss

    $14.99
    Original CR-10s Pro Nozzle with M6x.75mm Threads - 0.40mm  The Micro Swiss plated wear resistant nozzle starts as a precision machined brass nozzle and then has the Micro Swiss TwinClad XT coating applied. The result is a premium nozzle...
    SKU:
    MS-CR10SPRO-M2592-04
    Availability:
    Sold in units of 1
    $14.99
  • Bondtech Creality CR-10 Extruder Kit with mount

    Creality CR-10 Extruder Upgrade Kit with Mount | Bondtech

    Bondtech

    $85.00
    Bondtech Extruder Upgrade Kit for Creality CR-10 (mount included) This extruder upgrade kit for the Creality CR10, Ender, Tevo Tornado and other printers that uses the same type of mounting plate will replace the original feeder. This kit contains...
    SKU:
    BOND-CR10-K48
    Category:
    Bondtech Extruders
    $85.00
  • On Sale
    Bondtech Creality Extruder Kit with mount for filament sensor

    Creality CR-10S Extruder Upgrade Kit with Mount | Bondtech

    Bondtech

    Now: $84.95
    Regular Price: $89.95
    Bondtech BMG Extruder Upgrade Kit for Creality CR-10S with Mount The Bondtech extruder allows for a more reliable printing with all sorts of filaments and the Dual Drive system ensures that the extruder never looses grip of the filament.  This...
    SKU:
    BOND-CR10S-K49
    Category:
    Bondtech Extruders
    Now: $84.95
    Regular Price: $89.95
  • DDS Main Cable Assembly

    DDS Main Cable Assembly - Gen 2 DDS | Bondtech

    Bondtech

    $39.95
    DDS Main Cable Assembly Fits: 2nd Generation DDS for CR-10S Length: 120 cm Includes 1x DDS main cable with: Molex micro-fit male plugs for Heater and Thermistor cartridges JST contact plugs, male, for axial and radial fans...
    SKU:
    BOND-CBL-15042
    Category:
    Bondtech Parts
    $39.95
  • Bondtech DDX Micro Swiss Mount

    DDX Adapter For Micro Swiss All-Metal Hotend | Bondtech

    Bondtech

    $9.95
    DDX Adapter For Micro Swiss All-Metal Use a Micro Swiss All Metal hotend with the Bondtech DDX. Part is SLS printed in PA12 (Nylon) Requires DDX extruder v2 or later. This part is necessary to install a Micro Swiss All Metal hotend on a DDX...
    SKU:
    BOND-DDX-10079-53
    Category:
    Bondtech Parts
    $9.95
  • Bondtech DDX adapter for Mosquito Hotend

    DDX Adapter For Mosquito | Bondtech

    Bondtech

    $9.00
    DDX Adapter for Mosquito   To use with Bondtech DDX Direct Drive eXtruder for Creality   This set is necessary to install Slice Engineering's Mosquito hotend in a DDX Upgrade kit.     Important Notes from Bondtech:...
    SKU:
    BOND-DDX-MOS-10079-51
    Category:
    Bondtech Parts
    $9.00
  • DDX Adapter Set For Creality Ender-3 / CR-10

    DDX Adapter Set For Creality Ender-3 / CR-10 | Bondtech

    Bondtech

    $49.95
    DDX Adapter Set For Creality Ender-3 / CR-10 Note: Does not fit DDX V3 This set is necessary to install a DDX Upgrade Kit on the models listed below. Fits: Ender-3 CR-10 CR-10S CR-10 S4 CR-10 S5 Requires your printer to have a 40x40x10mm...
    SKU:
    BOND-DDX-K77A
    Category:
    Bondtech Parts
    $49.95
  • DDX v2 Rear Housing - SLS

    DDX v2 Rear Housing - SLS | Bondtech

    Bondtech

    $15.00
    DDX v2 Rear Housing For owners of DDX v1 units only Fit the Micro Swiss hotends in your DDX. SLS made part using Polyamide 12 (Nylon).
    SKU:
    BOND-DDX-RHSNG-10079-2V2
    Category:
    Bondtech Parts
    $15.00
  • MicroSwiss Direct Drive for Ender 5

    Direct Drive Extruder for Ender 5 - Extruder Only | Micro Swiss

    Micro-Swiss

    $57.75
    Micro Swiss Lightweight Direct Drive Extruder (Extruder Only Version) This is the "extruder only" version and does not include a hotend. The Micro Swiss All Metal Hotend is available for purchase here Disclaimer: There has been an...
    SKU:
    MS-DDE-M2604
    $57.75
  • MicroSwiss Direct Drive for Ender 5

    Direct Drive Extruder for Ender 5 - with Hotend | Micro Swiss

    Micro-Swiss

    $99.75
    Micro Swiss Lightweight Direct Drive Extruder with All Metal Hotend This version includes a Micro Swiss All Metal Hotend. The "Extruder Only" version is available for purchase here. Disclaimer: There has been an extruder stepper motor update...
    SKU:
    MS-DDE-M2603
    $99.75
  • Bondtech DDS Fan Shroud

    Fan Shroud (SLS) for DDS | Bondtech

    Bondtech

    $5.99
    Bondtech SLS Fan Shroud for DDS This Bondtech part cooling fan shroud is a replacement part of the DDS for CR-10S. 3D printed in PA12 using SLS technology in industrial grade machines. Fits: 1st or 2nd Generation DDS for CR-10S Mounting...
    SKU:
    BOND-10067-3
    Category:
    Bondtech Parts
    $5.99
  • BuildTak FlexPlate 165x165

    FlexPlate Only - 165x165 (Ender 2) | BuildTak

    BuildTak

    $13.95
    165x165mm (6.5"x6.5") Replacement FlexPlate for Ender 2 Please Note: This is not the Complete Builtak Flex System. This is a replacement FlexPlate and requires a magnetic mounting base and Builtak print surface. Specially-coated FlexPlates...
    SKU:
    BTAK-FLXPLT-ONLY-165165
    $13.95
  • BuildTak FlexPlate 235x235

    FlexPlate Only - 235x235 (Ender 3) | BuildTak

    BuildTak

    $23.95
    235x235mm (9.25"x9.25") Replacement FlexPlate Please Note: This is not the Complete Builtak Flex System. This is a replacement FlexPlate and requires a magnetic mounting base and Builtak print surface. Specially-coated FlexPlates...
    SKU:
    BTAK-FLXPLT-ONLY-235235
    $23.95
  • Hardware kit for Micro Swiss Direct Drive Extruder

    Hardware kit for Direct Drive Extruder | Micro Swiss

    Micro-Swiss

    $4.50
    Hardware kit for Direct Drive Extruder This is a spare hardware kit for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  This kit contains: 1x Beveled PTFE liner 3x M3 x .5 x 6mm Screws 2x M5 x .8 x 20mm Nylon...
    SKU:
    MS-M2706
    $4.50
  • Copperhead C-E Heat Break for Creality 3D Printers

    Heat Break for Copperhead™ Hotend - C-E | Slice Engineering

    Slice Engineering

    $31.95
    Copperhead™ Heat Break for Creality 3D Printers Bimetallic Heat Break™ - Stainless steel and Copper Alloy Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep For more documentation on the...
    SKU:
    SLICE-HB-CE
    Category:
    Extruder & Hotend
    Brand:
    Slice Engineering
    Fits:
    Creality Ender-3
    Fits:
    Creality Ender-3 Pro
    Fits:
    Creality Ender-5
    Fits:
    Creality Ender-5 Pro
    Fits:
    Creality Ender-5 Plus
    Fits:
    Creality CR-10
    Fits:
    Creality CR-10 Mini
    Fits:
    Creality CR-10S
    Fits:
    Creality CR-10 S4
    Fits:
    Creality CR-10 S5
    $31.95
  • Copperhead heat break - C-Pro Max

    Heat Break for Copperhead™ Hotend - C-Pro Max | Slice Engineering

    Slice Engineering

    $31.95
    Copperhead™ Heat Break - C-Pro Max Bimetallic Heat Break™ - Stainless steel and Copper Alloy Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep For more documentation on the...
    SKU:
    SLICE-HB-CPMAX
    Category:
    Extruder & Hotend
    Brand:
    Slice Engineering
    Fits:
    Creality CR-10S Pro
    Fits:
    Creality CR-10S Pro v2
    Fits:
    Creality CR-10 Max
    $31.95
  • Heater Cartridge Repair Set for DDS Gen I

    Heater Cartridge Repair Set for DDS Gen 1 | Bondtech

    Bondtech

    $9.95
    Heater Cartridge Repair Set for DDS Gen I Fits: 1st Generation DDS for CR-10S Included in this set: 1x 12v 40W Heater Cartridge 2x black nylon zip ties 8 cm of shrinking tube 11 cm of soldering wiring Step by Step Guide Please check how...
    SKU:
    BOND-HTR-14114
    Category:
    Bondtech Parts
    $9.95
  • MK8 Brass Nozzle 0.40mm

    MK8 Brass Nozzle - 0.40mm

    PB Select

    $6.99
    0.40mm MK8 Precision Ground Brass Nozzle
    SKU:
    PBX-NZL-MK8BRS-040
    Availability:
    Sold in units of 1
    $6.99
  • MK8 Brass Nozzle 0.80mm

    MK8 Brass Nozzle - 0.80mm

    PB Select

    $6.99
    MK8 Precision Ground Brass Nozzle - 0.80mm   
    SKU:
    PBX-NZL-MK8BRS-080
    Availability:
    Sold in units of 1
    $6.99
  • Micro Swiss MK8 M2 Hardened Steel Nozzle

    MK8 M2 Plated Hardened Steel Nozzle - Micro Swiss - 0.80mm

    Micro-Swiss

    $21.99
    M2 Hardened High Speed Steel Nozzle - MK8 (CR10 / Ender / Tornado / MakerBot) Size: 0.8mm The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel,...
    SKU:
    MS-MK8-M2HS-M2500-08
    Availability:
    Sold in units of 1
    $21.99
  • MicroSwiss M2 MK8 Nozzle - 0.60mm

    MK8 M2 Plated Hardened Steel Nozzle - Micro Swiss - 0.40mm

    Micro-Swiss

    $21.99
    M2 Hardened High Speed Steel Nozzle - MK8 (CR10 / Ender / Tornado / MakerBot) Size: 0.4mm The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel,...
    SKU:
    MS-MK8-M2HS-M2500-04
    Availability:
    Sold in units of 1
    $21.99