Genuine Prusa

Prusa Hotend Fan (Version B) This is a replacement hotend (heatsink) cooling fan. Please Note: This is not the Noctua fanThis is ONLY a direct fit replacement for the MK3, MK3S and MK3S+. See...

Y Carriage  Fits:  Prusa MINI Prusa MINI+ Carriage only, no hardware included

  Basics of 3D Printing with Josef Prusa  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for...

Factory Second - Double-Sided Smooth PEI Spring Steel Sheet for Prusa MINI - Factory Second This is the replacement spring steel sheet with smooth double-sided PEI for the Original...

Anti-slip Pad Set  Includes: Anti-slip pad (6 pcs) To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer...

PSU Replacement power supply unit for the Original Prusa MINI/+, SL1S, and CW1/S. Includes: Power supply unit (1 pcs)  Specifications: 24 Volts 150...

Pulley Motor MMU2S Includes: Pulley motor MMU2S (1 pcs) Specifications: Connector: MOLEX 50-57-9404 Rated current: DC 1A To replace this part, please consult the Prusa Assembly...

Selector Motor MMU2S Includes: Selector motor MMU2S (1 pcs) Trapezoid nut (1 pcs) Specifications: Connector: MOLEX 50-57-9404 Rated current: DC 1A To replace this part, please...

Spare Parts Bundle (MINI+) A convenient set of spare parts and extra fasteners for maintenance and easy repairs of the Original Prusa MINI+ printer. Fits: MINI+ Includes: Linear...

Spare Parts Bundle (MK3S+) A convenient set of spare parts and extra fasteners for maintenance and easy repairs of the Original Prusa i3 printer. Fits: MK3S+ Includes: Linear...

Control board for Prusa MMU2S Replacement MMU2S control board. This has the MMU2S firmware pre-installed. Includes: Control board with MMU2S firmware (1 pcs) Fits: MMU2S To...

Prusa MMU2S-Einsy/Rambo signal cable Replacement MMU2S-Einsy/Rambo signal cable Includes: Signal cable (1 pcs)  Fits the following printers with MMU2S: MK2.5  MK2...

Prusa MINI/+ Heated Bed Assembly (24v) Magnetic heated bed for the Original Prusa MINI/+. All listed components are already assembled together. Please Note: Flexible Spring Steel sheet is NOT...

Prusa MMU2S-Einsy power cable Replacement MMU2S to Einsy power cable.  Please Note: It is only compatible with the MK3/S. It is NOT compatible with MK2.5/S printers...

Prusa MINI/+ Filament Sensor (assembly) Please note: This Prusa filament sensor is ONLY compatible with the MINI and MINI+ Includes: IR filament sensor 1 (pcs) IR filament sensor-Buddy board...

  Z Axis Stepper Motor and Lead Screw This is the replacement stepper motor for the Original Prusa MINI/+. It is ONLY compatible with the Original Prusa MINI and MINI+...

Prusa MINI/+ Y Axis Stepper Motor  This is the replacement stepper motor for the Original Prusa MINI/+. It is ONLY compatible with the Original Prusa MINI and MINI+.  Includes:...

Prusa Mini/+ X Axis Stepper Motor  This is the replacement stepper motor for the Original Prusa MINI/+. It is ONLY compatible with the Original Prusa MINI and MINI+. Includes: Stepper...

Extruder Stepper Motor (E Axis) This is the replacement stepper motor for the Original Prusa MINI/+. It is ONLY compatible with the Original Prusa MINI and MINI+. Includes: Stepper motor -...

Einsy RAMBo Mainboard This Einsy RAMBo has the MK3 firmware pre-installed. Please note: It does NOT have the MK3S/+ firmware pre-installed. Includes:  Einsy RAMBo with MK3...

Double-sided Satin PEI Powder-coated Spring Steel Sheet for the Original Prusa i3 MK2.5, 2.5S and MK3, MK3S, MK3S+ Prusa's satin sheet sits between the smooth and textured variants...

Heatbed Thermistor Set Includes: Heatbed thermistor E3D (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 650...

Prusa Anti-Vibration Foot Includes: Anti-vibration foot (1 pcs) To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...

Original Prusa Spring Steel Sheet with Smooth Double-sided PEI This is the replacement spring steel sheet with smooth double-sided PEI for the Original Prusa i3 magnetic heatbeds...

Prusa Heated Bed Assembly This is a replacement (MK52 12V) magnetic heatbed. It is ONLY compatible with the MK2.5 and MK2.5S . Note: NOT compatible with the MK3/S/+. Includes: Magnetic...

Double-Sided Smooth PEI Spring Steel Sheet for Prusa MINI This is the replacement spring steel sheet with smooth double-sided PEI for the Original Prusa MINI magnetic heatbeds...

Prusa MINI Double-Sided Satin PEI Powder-Coated Spring Steel Sheet The satin spring steel sheet further expands the Prusa line-up of print sheets. In terms of printing properties, the satin sheet...

Spare Parts Bundle (MK3S) A convenient set of spare parts and extra fasteners for maintenance and easy repairs of the Original Prusa i3 MK3S printer. Includes: Linear MISUMI...

Prusa Lubricant Applicator Set - 5g Universal lubricant with applicator for printer maintenance. After a certain period of time (see the 3D Printing Handbook), your printer should be...

Prusa LCD Display This LCD unit supports the screen brightness adjustment feature. Brightness function requirements: MK3, MK3S, Einsy board revision 1.1a (or newer), Firmware 3.9.0 (or...

Terminal Block Connector for Prusa Includes:  Molex connector - 15 amp (1 pcs) Screws (2 pcs) Used for hotend heater cartridge (MK2/S, MK2.5/S, MK3/S/+, MINI/+) Used for heatbed...

Idler Pulley Includes:  Idler Pulley (1pcs) Fits: MK2 MK2S MK2.5 MK2.5S MK3 MK3S MK3S+ MINI MINI+ To replace this part, please consult the Prusa Assembly Manuals...

Prusa PSU This is the replacement power supply unit - 12V. It is ONLY compatible with the below listed models. Note: This PSU has a manual switch for 110V and 220V - Make sure to set the...

Prusa Buffer Tube - PTFE This is a replacement PTFE tube for the MMU2S unit to the Filament Buffer. Includes: MMU2S-Buffer PTFE tube (1 pcs) Specifications: Length: 650 (tolerance +/- 1...

Prusa MK3S+ Bearing Clips Please Note: Bearings not included Includes:  Bearing Clip (3 pcs) Screws (6 pcs) Nyloc Nuts (6 pcs) Fits: MK3S+ To replace this part, please...

Prusa Print (Part) Cooling Blower Fan This is the fan that cools the part being printed. Includes: Print cooling fan (1 pcs) Fits: MK3 MK3S MK3S+ MINI MINI+ To replace this part,...

Prusa Timing Belt Pulley Includes:  Timing pulley T16-2GT (1 pcs) Grub screw (2 pcs) To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

Prusa MINI Hotend Fan This is a replacement hotend fan. Please Note: This fan is ONLY compatible with the Original Prusa MINI and MINI+. Includes: Hotend fan (1...

Prusa MINI Bearing Clips Please Note: Bearings not included Includes:  Bearing Clip (3 pcs) Screws (6 pcs) Nyloc Nuts (6 pcs) Fits: MINI MINI+ To replace this part,...

Prusa Buddy Control Board This is a replacement Buddy control board for the Original Prusa MINI, MINI+. Includes: Buddy Control Board (1 pcs) To replace this part, please consult the...