Printer Parts

  6063 GT Pulley Includes: 6063 2GT Pulley (1 pcs) Fits: Creator 4 Note: 2 set screws needed for installation (not included). Set screws available here.

Build Plate Heater for SV06 Plus Includes: Aluminum bed heater assembly (1 pcs)Magnetic sheet - installed (1 pcs)Insulation - installed (1 pcs) Fits: SV06 Plus Note: Does not include build plate/print surface or mounting hardware.

  Flashforge Z Motor Cable Runs from Z axis motor to mainboard Includes: Cable (1 pcs) Fits: Creator Pro

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge X Limit Switch (Endstop) Cable Runs from X axis limit switch to mainboard Includes: Cable (1...

   Used Item  Cables are removed from low hour 3D printers. Flashforge Y Motor Cable Includes: Cable (1 pcs) Plug color: Yellow Fits: Creator MaxDreamerDreamer NXInventor

Flange Screw This screw is usually used to hold a bead thermistor in the heater block. Includes: Flange screw (1 pcs) Size: M3x5mm

Revo™ ObXidian High Flow Nozzle The Revo High Flow ObXidian combines the Obxidian and High Flow features into one nozzle. Includes: Revo nozzle of selected size (1 pcs) High Flow Features: The Revo High Flow nozzle increases your...

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Y Axis Drive Belt Includes: Belt (1 pcs) Length: 590mm Fits:Creator ProCreator Pro 2Creator MaxCreator...

12V Dual Ball Bearing 25mm Fan 25x25x10mm12 volt3.64 CFMMolex Micro-Fit 3.0 style connector2 bolts included - mount directly to your Slice Mosquito or Mosquito Magnum hotend Fits: Slice Mosquito Hotend  

Artillery 30Pin, 650mm, FFP Cable Includes: Cable (1 pcs) Length: 650mmPins: 30  Fits: Sidewinder X1

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

3D Print Removal Tool - Scraper This is the model that comes with new Artillery printers. It can be used with any printer.  Includes: Scraper (1 pcs) Please Note: This is the latest version from Artillery and has a slightly...

3mm Bed Magnets for R1/+ Glass Bed Apply using epoxy and clamps for best results. Includes: Magnet (4 pcs) Fits:Robo R1Robo R1+ Note: These magnets are 3mm thick and do not work with the latest v2.5 R1+ bed, which...

PB Select™ 3mm Nylon Filament  This 3mm nylon filament is used in the wiring harness of Prusa i3 printers.The length is 50cm which is the proper length for the extruder wiring harness. It can be cut down to 30cm if you need it...

  4010 Extruder Fan for MakerGear M2 - 12 volt  Includes: Fan (1 pcs) Voltage: 12 VDCSize: 40x40x10mmLocation: Extruder or electronics case Fits: M2 (12 volt version) This is the smaller of the two fans mounted in front...

PB Select™ Metal Fan Guard Includes: Fan guard (1 pcs) Fits: 40x40mm fans Note: Mounting screws not included

  Creality Ender-3 V2 Blower Fan This is the fan that cools the part when printing Includes: Blower Fan (1 pcs) Fits: Ender-3 V2Ender-3 V2 NeoCR-200B

  4010 Extruder Fan This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against incorrect plug-in. All fans should be kept free of...

  4015 Bed Fan This is the fan the cools the part being printed. It is sometimes called the print or part cooling fan.  Includes: Fan (1 pcs) Voltage: 24 VDCSize: 40x40x15mm Fits: M3    

24-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in.  Fits: All MakerGear M3s    

  5010 Extruder Fan for MakerGear M2 - 12 volt  Includes: Fan (1 pcs) Voltage: 12 VDCSize: 50x50x10mmLocation: Extruder Fits: M2 (12 volt version) Mounted at a 45 degree angle in front of the extruder's 40mm fan, this...

  5010 Extruder Fan for MakerGear M2 Dual Extruder - 24 volt  Includes: Fan (1 pcs) Voltage: 24 VDCSize: 50x50x10mmLocation: Extruder Fits: M2 Dual Extruder  This fan has longer leads to accommodate the M2 Dual 3D...

  5010 Extruder Fan for MakerGear M2 - 24 volt Includes: Fan (1 pcs) Voltage: 24 VDCSize: 50x50x10mmLocation: Extruder Fits: M2 (24 volt version) Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm...

6mm Bed Magnets for R1+ Glass Bed Please note: These magnets are 6mm thick, they work with the latest v2.5 R1 bed, which requires 6mm magnets. Apply using this epoxy and clamps for best results. Includes: Bed magnet (4...

  Activated Carbon HEPA Filter Includes: Activated carbon filter (1 pcs) Fits: Guider 2S/HTRobo E3 Pro

Extruder Air Duct  Directs air to the part being printed. MJF/SLS printed in nylon (PA12) for durability and temperature resistance. Includes:Air Duct (1pcs)Mounting screw (1 pcs) Fits: Dreamer NX

Used Item  Removed from low hour 3D printers. Extruder Air Duct  Directs air to the part being printed. Includes:Air Duct (1pcs) Fits: Dreamer NX

  Flashforge Extruder Air Duct  Directs air to the part being printed Includes: Air duct (1 pcs) Fits:DreamerInventorCreator ProCreator Max Note: Does not include mounting screw

   Used Item  Cables are removed from low hour 3D printers. Flashforge Extruder Air Duct  Directs air to the part being printed Includes: Air duct (1 pcs) Fits:DreamerInventorCreator ProCreator Max Note: Does not...

  Flashforge Extruder Air Duct Fan shroud directs air to the part being printed. Includes:Air duct (1 pcs)Screws (2 pcs) Fits:Guider 2Inventor 2

  Flashforge Extruder Air Duct - For LEFT EXTRUDER Directs air to the part being printed. Includes: Air Duct (1pcs) Fits:Creator Pro 2 (left extruder)Creator Max 2 (left extruder) Note: Does not include mounting screws

  Flashforge Extruder Air Duct  Directs air to the part being printed Includes: Air duct (1 pcs) Fits: Adventurer 3Monoprice VoxelRobo E3 Note: Does not include mounting screws

  Flashforge Extruder Air Duct - For RIGHT EXTRUDER Directs air to the part being printed. Includes: Air Duct (1pcs) Fits: Creator Pro 2 (right extruder)Creator Max 2 (right extruder) Note: Does not include mounting screws

  Flashforge Extruder Air Duct Assembly Directs air to the printed part Includes:Air Duct (1 pcs)Metal heat shield (1 pcs)Mounting screws (2 pcs) Fits: Guider 2S HTRobo E3 Pro

Flashforge Hotend Air Duct (Left Side) Directs air to the part being printed Includes: Left side air duct (1pcs) Fits: Creator 3 Note: Does not include mounting screws

  Flashforge Hotend Air Duct (Right Side) Directs air to the part being printed Includes: Right side air duct (1pcs) Fits: Creator 3 Note: Does not include mounting screws

  Flashforge Hotend Air Duct Directs air to the part being printed. Includes: Air duct (1pcs) Fits: Adventurer 3 Pro 2Adventurer 4 Pro Note: Does not include mounting hardware.

  Air Duct and Print Head Bottom Cover  Directs air to the part being printed and holds the LED light and nozzle latches in place.  Includes: Air duct (1 pcs) Fits: Adventurer 4 Note: Does not include mounting screw

  Flashforge Hotend Air Duct Directs air to the part being printed. Installs on either the left or right side.  Includes: Air duct (1pcs) Fits: Creator 3 Pro Note: Does not include mounting screws

  Flashforge Hotend Air Duct Directs air to the part being printed. Installs on either the left or right side.  Includes: Air duct (1pcs) Fits: Guider 3 Ultra Note: Does not include mounting screws

  Flashforge Hotend Air Duct Directs air to the part being printed. Installs on either the left or right side.  Includes: Air duct (1pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro Note: Does not include mounting screws

Hotend Air Duct for SV06 Plus Directs airflow to the part being printed Includes: Air duct (1 pcs) Fits: SV06 PlusSV07SV07 Plus

Hotend Air Duct for SV06 Directs airflow to the part being printed Includes: Air duct (1 pcs) Fits: SV06

Air Duct Screw (M3x8) Guider 2/2S, Inventor 2, Finder Holds the plastic air duct in place. Includes: M3x8 screw (2 pcs) Fits:Guider 2Guider 2S HTInventor 2FinderRobo E3 Pro

  Flashforge Air Filter Magnets to the underside of the chamber fan in the top of the print chamber. Includes:HEPA filterCharcoal filterFilter Housing with magnets Fits:Adventurer 3Monoprice VoxelRobo E3

  Flashforge Air Filter HEPA and charcoal air filter. Includes: Filter (1 pc) Fits:Adventurer 4Robo E4 ProGuider 3Guider 3 PlusCreator 3Creator 3 Pro

  Creality Metal Extruder Kit Color: Gray Replaceable push-fit connectorAdjustable tension for more precise control of the filamentIncludes all hardware needed for installation Fits:Ender-3 SeriesEnder-5 SeriesCR-10 Series

  Creality Metal Extruder Kit Never let a broken plastic extruder stop you again! This metal extruder upgrade will last a lot longer than the plastic stock extruder. Integrated push-fit connectorAdjustable tension for more precise control of the...

Microswiss All Metal Hotend Kit for CR-10/Ender/Tornado/X5S/U20 Nozzle Size:  0.40mm Key benefits: No printer modification needed - this kit is a drop-in replacement for the CR-10. Faster heat dissipation - Microswiss has...

  All Metal Hotend Kit for Creality CR-6 SE / CR-6 MAX / CR-10 Smart Kit comes standard with a  0.40mm  MK8 nozzle. Fits:CR-6 SECR-6 SE MaxCR-10 Smart *Fan Adapter required Installation Instruction Video by Embrace Making for...

Microswiss All Metal Hotend Kit - 0.40mm Includes:0.40mm plated brass wear-resistant nozzle (1 pcs)Heat break (1 pcs)Jam nuts - to aid in removing old hotend (1 pcs) Description:The Microswiss all metal hotend allows you to print at much higher...

All Metal Hotend Kit with Slotted Cooling Block for Wanhao i3 This upgrade includes a modified thermal barrier tube, nozzle and cooling block. The thermal barrier tube is made from 2 different materials: The lower thermal break is made from...

Microswiss MK8 All Metal Hotend Kit Microswiss' all metal hotend allows you to print at much higher temperatures than with PTFE-lined hotend.  Another benefit of this all metal hotend design is more consistent melt chamber control. During slow...

Aluminum Motor Mount This is the extruder motor mount that comes standard on the M3-ID and M3-SE Rev.1 machines Includes: Motor mount (1 pcs)M3x22 bolts (3 pcs) Fits:M3-SEM3-ID

PB Select™ Stepper Motor Mount CNC machined 3 mm thick in lightweight aluminum, assuring a secure and stable mount for your BMG extruder. Includes: Motor mount (1 pcs) Fits:Bondtech BMGNEMA 17 Stepper Motor

Aluminum Spacer Includes: Spacer (1 pcs) Size:ID: 5mmOD: 8mmLength: 7mm Fits:Sidewinder X2Genius ProHornet

Anti Static ESD Grounding Bracelet Wear whenever working on the electronics of your 3D printer to reduce the risk of damage to sensitive components. Note: Always shut down and unplug your printer before working on it.

Anti-slip Pad Set  Includes: Anti-slip pad (6 pcs) To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

Prusa Anti-Vibration Foot Includes: Anti-vibration foot (1 pcs) Fits:MK3MK3SMK3+MK4 To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

Artillery Automatic Bed Leveling Assembly (Sensor Switch) Includes: ABL switch (1 pcs) Fits: Sidewinder X2Genius Pro

Artillery Automatic Bed Leveling Sensor (ABL) Includes: ABL switch (1 pc) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

  Basics of 3D Printing with Josef Prusa   English Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d...

  Basics of 3D Printing with Josef Prusa   Spanish Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d.com...

18 volt Battery Adapter for Makita™ style tool batteries  3 amp maximum  (if you need to power something more than 3 amps, use a relay) Installed in the bottom of the adapter is a small "blinker board" (low voltage cutoff) to...

MilWalt Battery Adapter   3 amp maximum  (if you need to power something more than 3 amps, use a relay) This adapter fits both Milwaukee and DeWalt style batteries  On the underside of the adapter is a small "blinker board"...

Blinker Board - 3.5 amp Protects tool batteries from over discharge. Includes: Blinker Board (1 pcs) Compatible with: DeWalt, Milwaukee and Makita (12/18/20 volt Lithium Ion batteries.) Max Current: 3.5 amps (This is not (Ah) amp...

Artillery Deep Groove Ball Bearing (605ZZ) Includes: Bearing (1 pcs) Specifications:ID: 5mmOD: 14mmW: 5mm  Fits: Sidewinder X1Genius

Bearing - Titan/Titan Aero Extruder Replacement Titan/ Titan Aero bearings with an upgraded lubricant to increase the lifespan of your extruder.  These bearings are sealed so there is no need for additional lubrication. Specifications:ID: 5mmOD:...

Artillery Bearing (95ZZ) Includes: Bearing (1 pcs) Specifications:ID: 5mmOD: 9mmW: 3mm Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

608ZZ Roller Bearing Includes: Bearing (1 pcs) Specifications:ID: 8mmOD: 22mmW: 7mm Fits:Robo R1+Prusa MINIPrusa MINI+Prusa MMU2S

608ZZ Roller Bearing A nice quality roller bearing with metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 8mmOD: 22mmW: 7mm

623ZZ Roller Bearing A nice quality roller bearing from E3D. Metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 3mmOD: 10mmW: 4mm Fits: Hemera (motor/heatsink)

624ZZ Roller Bearing A nice quality roller bearing with metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 4mmOD: 13mmW: 5mm

625ZZ Roller Bearing A nice quality roller bearing with metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 4mmOD: 13mmW: 5mm

626ZZ Roller Bearing A nice quality roller bearing with metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 6mmOD: 19mmW: 6mm

MR106ZZ Ball Bearings Includes: Bearing (2 pcs) Specifications:ID: 6mmOD: 10mmW: 3mm Non Lubricated 

Bearing for DDX Direct Drive Extruder & IDGA Ball bearing to use in Bondtech DDX Direct Drive eXtruder Includes: Bearing (1 pcs) Specifications:ID: 4mmOD: 8mmW: 3mm Fits:DDXIDGA

  Ball Bearing (MR85ZZ) Includes: Bearing (1 pcs) Specifications:ID: 5mmOD: 8mmW: 2.5mm Fits: Creator Pro

MR85ZZ Ball Bearings High precision ball bearing used in the Bondtech BMG and dual/single direct extruders for Raise3D. Includes: Bearing (2 pcs) Specifications:ID: 5mmOD: 8mmW: 2.5mm Note: Does not fit the new BMG IDGA extruders

Bondtech Ball Bearing High precision ball bearing used in the Bondtech BMG and dual/single direct extruders for Raise3D. Includes: Bearing (1 pcs) Specifications:ID: 5mmOD: 8MMW: 2.5mm Note: Not for use with the IDGA extruders.

MR95ZZ  Bearing for Titan and Titan Aero Extruder Includes: Bearing (2 pcs) Specifications:ID: 5mmOD: 9mmW: 3mmMR95ZZABEC 5 Fits: TitanTitan Aero

  Flashforge Bearing Clamp This little plastic part clamps the bearing to the bracket. Includes: Plastic clamp (1 pcs) Fits:DreamerDreamer NXInventor Note: Mounting screws not included

Prusa MINI Bearing Clips Includes: Bearing Clip (3 pcs)Screws (6 pcs)Nyloc Nuts (6 pcs) Note: Bearings not included. Fits:MINIMINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

Bearing Clips for Prusa MK4 Includes: Bearing Clip (3 pcs)Bearing pad - plastic (3 pcs)Bearing pad - rubber (3 pcs)Screws (6 pcs) Fits:MK3.9MK4 Note: Bearings not included To replace this part, please consult the Prusa Assembly...

Bearing Clips for Prusa MK3S+ Includes: Bearing Clip (3 pcs)Screws (6 pcs)Nyloc Nuts (6 pcs) Fits:MK3S+ Note: Bearings not included To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

PB Select™ Bearing Clips for Prusa MK3S+ Includes: Bearing clip (3 pcs)Screws (6 pcs)Nyloc Nuts (6 pcs) Fits: MK3S+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...

  Flashforge Bearing (105ZZ) This is the bearing that goes on the inner side of the pulley on the Y axis drive shaft. Includes: Bearing (1 pcs) Specifications:ID: 5mmOD: 10mmW: 4mm Fits:DreamerDreamer NXInventor Note: Sold in units...

  Bearing Under Build Tray This bearing is located on the underside of the build plate tray. Specifications:ID: 4mmOD: 12mmW: 4mm Includes: Bearing (1 pcs) Fits: Adventurer 3Monoprice VoxelRobo E3

Robo R1+ Heated Bed Connection Cable  You will need this extension cable if you are upgrading from a v1 bed (with a long cable) to the v2 bed (which has a short cable). Buy the R1+ heated glass V2 bed here. Includes: Cable (1...

R2 Bed Connection Cable  Includes: Cable (1 pcs) Fits: R2 (only fits v2 heated bed)

  Silicone Bed Heater for MakerGear M3 & M2 - 24 Volt  Includes: Bed heater (1 pcs) Fits:M2 (24 volt version only)M3-SEM3-ID Note: Terminal block plug not included. Available separately here

Artillery Silicone Heater for Print Bed Includes:110v Silicone Heater (1 pcs)220x220x7mm Thermal Insulation (1 pcs) Voltage: 110 VAC Fits: Genius

Silicone Heater Kit for Print Bed Includes: Silicone Heater (1 pcs)220x220x7mm Insulation pad (1 pcs) Voltage: 110 VAC Fits: Genius Pro

Artillery Silicone Heater for Print Bed Includes:Silicone Heater (1 pcs)300x300 adhesive backed insulation (1 pcs) Voltage: 110 VAC Fits: Sidewinder X1 Note: Artillery now uses the X2 insulation pad for this X1 bed heater (the X1-specific...

Silicone Heater for Print Bed Includes: Silicone Heater (1 pcs)300x300x7mm Thermal Insulation (1 pcs) Voltage: 110 Fits: Sidewinder X2

Bed Heater Includes: Heater (1 pcs)Insulation pad (1 pcs) Voltage: 110 VAC Fits: Sidewinder X3 Plus

Bed Heater Includes: Heater (1 pcs)Magnet - installed (1 pcs) Voltage: 110 VAC Fits: Sidewinder X3 Pro

Bed Heater Includes: Heater (1 pcs)Insulation pad - installed (1 pcs) Voltage: 110 VAC Fits: Sidewinder X4 Plus

Bed Heater Includes: Heater (1 pcs)Magnet - installed (1 pcs) Voltage: 110 VAC Fits: Sidewinder X4 Pro