E3D and Compatible

Bearing - Titan/Titan Aero Extruder Replacement Titan/ Titan Aero bearings with an upgraded lubricant to increase the lifespan of your extruder.  These bearings are sealed so there is no need for additional lubrication. Fits: Titan Titan...

E3D Collet High quality replacement push-fit Collet with metal teeth.   Used with 1.75 mm filament and 4 mm PTFE Tube. Sold in units of 1

Bimetal Copper V6 Heat Break This bimetal heat break is comprised of copper and stainless steel. The thin stainless steel tube used as the break, reduces heat transfer to the cold end. While the copper on both the hotend and cold end increase...

E3D Volcano Nozzle - 0.60mm  Volcano nozzles are super fast printing nozzles for use with the Volcano block and prints large layer heights at extremely high flow rates. Volcano nozzles have extra long heated melt zones for ultimate filament melt...

E3D Volcano Nozzle - 0.80mm  Volcano nozzles are super fast printing nozzles for use with the Volcano block and prints large layer heights at extremely high flow rates. Volcano nozzles have extra long heated melt zones for ultimate filament melt...

E3D Volcano Nozzle - 1.00mm  Volcano nozzles are super fast printing nozzles for use with the Volcano block and prints large layer heights at extremely high flow rates. Volcano nozzles have extra long heated melt zones for ultimate filament melt...

E3D Heatsink/Hotend Fan - 30mm 12v Specs: Size: 30x30x10mm Voltage: 12v Amps: 0.10 Wire Length: 1000mm (+/- 10mm) Connector: Dupont 2 pin Ball Bearings: Yes - Dual

E3D Hotend Fan - 30mm 24v 30mm fan for the E3D hotend

E3D Fan - 40mm 12v Fits: E3D Titan Aero (or can be used on other 12v printers) Comes with 1 meter cable

E3D Fan - 40mm 24v Fits: E3D Titan Aero (or can be used on other 24v printers) Comes with 1 meter cable

RepRap Heatsink Fan Mount

Long lasting, durable fan mount for RepRap and E3D V6 style heat sink fan. This mount is machined out of aluminum to withstand heat and for longevity.  Fits:  E3D V6 RepRap V6 Style INTAMSYS FUNMAT HT  Please Note: This is...

RepRap Heatsink Fan Mount Color: Clear

RepRap Heatsink Fan Mount Color: Red

E3D Heat-Break - Kraken/Chimera - 1.75mm Heatbreak for the Kraken. This is also used in the Chimera, but is different from the Cyclops heat break. Drawings for this product are available on E3D's documentation page. Please Note: Sold in...

E3D Heatbreak for Prusa 3D Printers These Prusa specific E3D heatbreaks are like standard E3D v6 heatbreaks, but have a slightly different internal geometry to help with Multi Material printing. Fits: Original Prusa MK2/MK3 3D Printers E3D V6...

All Metal Heat Break Tube 1.75mm filament M7 threaded body Great for print high temperature filaments - ABS, PETG, ASA, PEI, PEEK, Etc. For lower temperature filaments use a PTFE lined heat break Fits: E3D V6 Style Hotends RepRap...

PTFE Lined Heat Break Tube 1.75mm filament M7 threaded body Not recommended for high temperature filaments. For high temperature, use an all metal Titanium heat break Fits: E3D V6 Style Hotends RepRap Hotends Sold in units of...

Brass Heater Block Fits: E3D V6 and RepRap hotends  

Nickle Plated Volcano Compatible Copper Heater Block This Volcano Compatible heater block allows you to use E3D thermistor cartridges, as well as a high temperature, high accuracy PT100 temperature sensors. Nickel Plated Copper Temperature up...

Replacement RepRap Heater Block Fits: E3D V6 and RepRap hotends  

Heater Block for Sensor Cartridges This Volcano Compatible heater block allows you to use E3D thermistor cartridges, as well as a high temperature, high accuracy PT100 temperature sensors. Compatible with E3D/RepRap heat break and Volcano...

E3D Volcano Heater Block for Sensor Cartridges This Volcano heater block allows you to use E3D thermistor cartridges, as well as a high temperature, high accuracy PT100 temperature sensors. With this heater block ,you can use the supplied M3 grub...

Premium Heater Cartridge Volts: 24 Watts: 70 Amps: 2.92 Size: 6x20mm Leads: 1000mm Max Temperature: 320c  

E3D Heater Cartridge Volts: 12 Watts: 40 Leads: 1000mm Fits: E3D Hotends, RepRap Hotends

Heater Cartridge Volts: 12 Watts: 40 Cartridge: 6x15mm Leads: 1000mm Silicone Wires Compatible Hotends: E3D V5/V6 RepRap

Heater Cartridge Volts: 12 Watts: 40 Cartridge: 6x20mm Leads: 1000mm Silicone Wires Compatible Heater Blocks: CR10 Mk8 Mk9 Volcano  

E3D Heater Cartridge - Standard Volts: 12 Watts: 30 Leads: 1000mm Fits: E3D Hotends, RepRap Hotends

E3D Heater Cartridge - Premium Volts: 12 Watts: 40 Leads: 1000mm Fits: E3D Hotends, RepRap Hotends

Premium Heater Cartridge Volts: 12 Watts: 70 Amps: 5.83 Size: 6x20mm Leads: 1000mm Max Temperature: 320c  

Heater Cartridge Volts: 24 Watts: 40 Cartridge: 6x15mm Leads: 1000mm Silicone Wires Compatible Hotends: E3D V5/V6 RepRap

Heater Cartridge Volts: 24 Watts: 40 Cartridge: 6x20mm Leads: 1000mm Silicone Wires Compatible Heater Blocks: CR10 Mk8 Mk9 Volcano  

E3D Heater Cartridge - Standard Volts: 24 Watts: 30 Leads: 1000mm Fits: E3D Hotends, RepRap Hotends

E3D Heater Cartridge - Premium Volts: 24 Watts: 40 Leads: 1000mm Fits: E3D Hotends, RepRap Hotends

E3D Heater Cartridge Volts: 24 Watts: 40 Diameter: 6mm Length: 21mm Leads: 1000mm Fits: E3D Hotends, RepRap and other hotends Hotends

E3D Heater Cartridge for Prusa MK3 & MK3S 3D Printers Volts: 24v Watts: 40w Leads: 700mm Fits: Prusa MK3 and MK3S only

RepRap Heatsink - 1.75mm Fits: RepRap and E3D V6 Hotends

RepRap V6 Heatsink - 1.75mm Gold Fits: RepRap and E3D V6 Hotends

RepRap Heatsink - 1.75mm Thread Mount Fits: RepRap and E3D V6 Style Hotends  

E3D Universal V6 1.75mm HeatSink with Coupling Replacement HeatSink for 1.75mm V6 HotEnds. Designed to work with both Bowden and Direct Drive HotEnds Includes an embedded coupling.