Sovol

Build Plate Heater for SV06 Plus Includes: Aluminum bed heater assembly (1 pcs)Magnetic sheet - installed (1 pcs)Insulation - installed (1 pcs) Fits: SV06 Plus Note: Does not include build plate/print surface or mounting hardware.

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

Hotend Air Duct for SV06 Plus Directs airflow to the part being printed Includes: Air duct (1 pcs) Fits: SV06 PlusSV07SV07 Plus

Hotend Air Duct for SV06 Directs airflow to the part being printed Includes: Air duct (1 pcs) Fits: SV06

Bed Leveling Sensor Switch Includes: Sensor switch (1 pcs) Fits: SV06 Plus

Bed Leveling Sensor Switch Includes: Sensor (1 pcs)Slide housing (1 pcs) Fits: SV06

Blower Fan This fan is used as the print cooling fan or the hotend heatsink cooling fan.  Includes: Fan (1 pcs) Specifications:Size: 40x40x10mmVoltage: 24vdc Fits: SV06 SV06 PlusSV07SV07 Plus Notes: Only one fan is...

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...

Brass Nozzle Includes: Nozzle (1 pcs) Size: Select Above For: 1.75mm diameter filament Fits:Sovol SV01Sovol SV03Sovol SV04Sovol SV05Sovol SV06  

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

Build Plate Heater for SV06 Includes: Aluminum bed heater (1 pcs)Magnetic sheet - installed (1 pcs) Fits: SV06 Note: Does not include build plate/print surface or mounting hardware.

Build Plate Heater for SV07 Plus Includes: Aluminum bed heater (1 pcs)Magnetic sheet - installed on bed heater (1 pcs) Fits: SV07 Plus Note: Does not include build plate/print surface or mounting hardware.

Build Plate Heater for SV07 Includes: Aluminum bed heater (1 pcs)Magnetic sheet - installed on bed heater (1 pcs) Fits: SV07 Note: Does not include build plate/print surface or mounting hardware.

LED Cable Connects from extruder board to extruder LED board Includes: Cable (1 pcs) Fits: SV07SV07 Plus

Microswiss MK8 CM2 Nozzle The Microswiss CM2™ Nozzle is an ideal nozzle for all applications. The core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains...

Drive Pulley for X or Y Axis Includes: Pulley (1 pcs)Set screw (2 pcs) Location: X or Y Motor Fits: SV06SV06 PlusSV07SV07 Plus

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

Extruder Adapter Board Includes: Extruder adapter board (1 pcs) Fits:SV06SV06 Plus

Extruder Adapter Board Includes: Extruder adapter board (1 pcs) Fits:SV07SV07 Plus

Extruder Assembly for Sovol SV07 and SV07 Plus Includes: Extruder assembly (1 pcs) Fits: SV07SV07 Plus

Extruder Assembly for SV06 Plus Includes: Extruder assembly (1 pcs) Fits: SV06 Plus

Extruder Assembly for SV06 Includes: Extruder assembly (1 pcs) Fits: SV06

Extruder Drive Gear This drive gear works as either the drive or driven gear. If you are replacing both drive gears, order two.  Includes: Drive gear (1 pcs) Fits: SV06SV06 PlusSV07SV07 Plus Note: Requires two M3x3 set...

Planetary Gear Set Includes: Planetary gear (3 pcs) Fits: SV06SV06 Plus Notes:Bearings not included. It is recommended to grease the gears. You can find grease here.  

Extruder Stepper Motor Includes: Stepper motor with gear (1 pcs) Fits: SV06SV06 PlusSV07SV07 Plus

6020 Axial Fan This is the large fan located on the X carriage behind the print head. It cools the print during high speed printing.  Includes: Fan (1 pcs) Specifications:Size: 60x60x20mmVoltage: 24vdc Fits: SV07SV07 Plus

Mainboard Cooling Fan Includes: Fan (1 pcs) Specifications:Size: 40x40x10mmVoltage: 24vdcAmps: 0.10A Fits: SV06 Plus

Hotend Fan Set Includes: Print cooling blower fan (1 pcs)Heatsink cooling fan (1 pcs) Fits: SV06 Plus

Filament Runout Sensor Includes: Sensor Switch (1 pcs) Fits: SV06 PlusSV07SV07 Plus

Build Plate (Print Surface) with Magnet Textured PEI powder coated Includes: Build plate (1 pcs)Magnetic base (1 pcs) Size: 310x320mm  Fits: SV06 PlusSV04

Flexible Steel Build Plate - Textured Powder Coated PEI Includes: Build plate (1 pcs)Magnetic base (1 pcs) Size: 235x235mm  Fits: SV06SV05

Build Plate (Print Surface) with Magnet Textured PEI powder coated on one side Includes: Build plate (1 pcs)Magnetic base with adhesive backing (1 pcs) Size: 310x320mm  Fits: SV07 Plus

Build Plate (Print Surface) with Magnet Textured PEI powder coated on one side Includes: Build plate (1 pcs)Magnetic base with adhesive backing(1 pcs) Size: 235x235mm  Fits: SV07

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

PB Select™ GT2 Stepper Motor Drive Pulley Recommended for use with Gates GT2/3 or other GT belts Includes: Idler pulley (1 pcs)Set screw (2 pcs) Fits: 6mm BeltTeeth: 20Width: 7mmBore: 5mmOuter diameter:15mm

Hardened Steel High Flow Nozzle Made of hardened steel for printing abrasive filaments.  Includes: Nozzle (1 pcs) Size: Select Above For: 1.75mm diameter filament Fits: SV06 PlusSV07SV07 Plus

Bi-Metal Heat Break Includes: Heat break (1 pcs) Fits:SV06SV06 Plus

Heater Block (Hot Block) Includes: Heater block (1 pcs) Fits: SV06 PlusSV07SV07 Plus Note: Does not include any installation hardware.

Heater Block (Hot Block) Includes: Heater block (1 pcs) Fits: SV06 Note: Does not include any installation hardware.

Hotend Heater Cartridge Heats the hotend Includes: Heater (1 pcs) Fits:SV06SV06 PlusSV07SV07 Plus

Hotend Assembly for SV06 Plus, SV07/Plus Includes: Heat break (1 pcs)Heater block (1 pcs)Heater cartridge (1 pcs)Thermistor (1 pcs)Silicon sock (1 pcs)M2.5x10 socket head cap screws (2 pcs)0.40mm nozzle (1 pcs) Fits: SV06 PlusSV07SV07 Plus

Hotend Assembly for SV06 Includes: Heat break (1 pcs)Heater block (1 pcs)Heater cartridge (1 pcs)Thermistor (1 pcs)Silicone sock (1 pcs)M2.5x3 socket head cap screw (2 pcs)0.40mm nozzle (1 pcs) Fits: SV06

Hotend Fan Set Includes: Print cooling fan (1 pcs)Heatsink fan (1 pcs) Fits: SV06SV07SV07 Plus

LCD Control Screen for SV06 Includes: LCD screen (1 pcs) Fits: SV06

LED Light (PCB Board) for Extruder Aluminates the part being printed.  Includes: Led light board(1 pcs) Fits: SV07SV07 Plus

MYT™ LM8UU Precision Linear Bearings Includes: Linear bearing (4 pcs) Specifications:ID: 8mmOD: 15mmL: 24mm Fits:Flashforge Creator Pro (Y Axis)Prusa MK2/SPrusa MK2.5/SPrusa MK3/S/+Prusa MINI/+Robo R1/+Anet A8Anet A8 PlusOther printers...

Linear Bearing Includes: Bearing (1 pcs) Fits: SV06 Plus

MYT LM10UU Linear Bearings Includes: Linear Bearing (4 pcs) Specifications:ID: 10mmOD: 19mmL: 29mm Fits:Guider 2 (X/Y axis)Guider 2S HT (X/Y axis)Prusa MINIPrusa MINI+Sovol SV06 PlusRobo E3 ProOther printers that use LM10UU linear bearings

Mainboard (Motherboard) for Sovol SV06 Plus This is the upgraded silent mainboard. Comes with firmware loaded. Includes: Mainboard (1 pcs) Fits: SV06 Plus

Mainboard (Motherboard) for Sovol SV06 This is the upgraded silent mainboard. Comes with firmware loaded. Includes: Mainboard (1 pcs) Fits: SV06

Microswiss MK8 Wear Resistant Brass Nozzle  Size: Select Above Includes: MK8 nozzle (1 pcs) - Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction.- Offers one...

PB Select™ MK8 Brass Nozzle Precision ground brass nozzle gives a smooth consistent print. Size: Select AboveIncludes: MK8 nozzle (1 pcs) Fits:Alfawise U20Alfawise U30Anet A8Anet A8 PlusAnet ET4Anet ET5XBQ Prusa I3 HephestosBQ...

MK8 M2™ Hardened High Speed Steel Nozzle  Size: Select Above Includes: Nozzle (1 pcs) The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2...

Nylon Mounting Pins for Extruder LED Light Nylon fasteners for mounting the LED light board to the extruder cover. Includes: Nylon pins (3 pcs) Fits: SV07SV07 Plus

Brass High Flow Nozzle Includes: Nozzle (1 pcs) Size: 0.40mm  For: 1.75mm diameter filament Fits: SV06 PlusSV07SV07 Plus

Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...

Hardened Steel High Flow Nozzle Set Made of hardened steel for printing abrasive filaments.  Includes: 0.40mm Nozzle (2 pcs)0.60mm Nozzle (2 pcs)0.80mm Nozzle (1 pcs)1.00mm Nozzle (1 pcs) Sizes: 0.40mm  0.60mm  0...

Power Supply Unit Includes: Power supply unit (1 pcs) Fits: SV06 Plus Specifications:Input voltage: 115/230V ACOutput voltage: 24V DCOutput amps : 21 (max)   ATTENTION  These power supplies have a switch on the side to...

Power Supply Unit Includes: Power supply unit (1 pcs) Fits: SV06 Specifications:Input voltage: 115/230V ACOutput voltage: 24V DCOutput amps: 15 (max)  ATTENTION  These power supplies have a switch on the side to select...

Roller Wheel (X/Y Carriage Roller Wheel) Includes: Wheel with Bearings (1 pcs) Fits: SV07SV07 Plus

M3x3 Set Screw Includes: Set screw (5 pcs) 12.9 GradeCup point

Creality Silicone Pro Sock The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep filament from...

Silicone Sock Includes: Silicone sock (1 pcs) Fits: SV06 PlusSV07SV07 Plus

Silicone Sock Includes: Silicone sock (1 pcs) Fits: SV06

PB Select™ Smooth Linear Rod - X Axis Includes: Linear rod (1 pcs) Specifications:Length: 435mmDiameter: 10mmG6 high precisionGcr15 steelHRC62 chrome plated Location: X axis Fits:Sovol SV06 Plus

PB Select™ Smooth Linear Rod - Y Axis Includes: Linear rod (1 pcs) Specifications:Length: 442.5mmDiameter: 10mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Y axis Fits:Sovol SV06 Plus

PB Select™ Smooth Linear Rod - Z Axis Includes: Linear rod (1 pcs) Specifications:Length: 498mmDiameter: 10mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Z axis Fits:Sovol SV06 Plus

PB Select™ Smooth Linear Rod - Y Axis Includes: Linear rod (1 pcs) Specifications:Length: 342.5 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Y axis Fits:Sovol SV06

PB Select™ Smooth Linear Rod - X Axis Includes: Linear rod (1 pcs) Specifications:Length: 355 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: X axis Fits:Sovol SV06

PB Select™ Smooth Linear Rod - Z Axis Includes: Linear rod (1 pcs) Specifications:Length: 400 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Z axis Fits:Sovol SV06

L Shaped Socket Wrench Size: 6 mm Includes: Wrench (1 pcs)

Stepper Motor Includes: Motor (1 pcs) Fitment Locations:X or Y axis on the SV06, SV07X or Z axis on the SV07 PlusX axis on the SV06 Plus Fits: SV06 (X/Y axis)SV06 Plus (X axis) SV07 (X/Y axis)SV07 Plus (X/Z axis) 

Stepper Motor for Y Axis Includes: Motor (1 pcs) Location: Y Axis Fits: SV06 Plus

Stepper Motor for Y Axis Includes: Motor (1 pcs) Location: Y Axis Fits: SV07 Plus

Stepper Motor for Z Axis Includes: Motor (1 pcs) Location: Z Axis Fits: SV06SV06 Plus

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

Hotend Thermistor Includes: Thermistor (1 pcs) Fits:SV06SV06 PlusSV07SV07 Plus

Bed Leveling Thumb Nut  Also called a bed leveling wheel or thumb wheel. These are used for leveling the print bed on Sovol and many other 3D printer brands Includes: Bed leveling nut (1...

Extruder Thumb Screw Assembly Includes: Thumb screw (1 pcs)Spring (1 pcs)Washer (1 pcs) Fits: SV06SV06 Plus

GT Timing Belt (X Axis) Includes: Timing belt (1 pcs) Location: X Axis Length: 920mm Fits: SV06 Plus

GT Timing Belt (X Axis) Includes: Timing belt (1 pcs) Location: X Axis Length: 770mm Fits: SV06

GT Timing Belt (X Axis) Includes: Timing belt (1 pcs) Location: X Axis Fits: SV07 Plus

GT Timing Belt (Y Axis) Includes: Timing belt (1 pcs) Location: Y Axis Length: 870mm Fits: SV06 Plus

GT Timing Belt (Y Axis) Includes: Timing belt (1 pcs) Location: Y Axis Length: 670mm Fits: SV06

GT Timing Belt (Y Axis) Includes: Timing belt (1 pcs) Location: Y Axis Fits: SV07 Plus

GT Timing Belt (Y Axis) Includes: Timing belt (1 pcs) Location: Y Axis Fits: SV07

Control Screen for SV06 Plus Includes: Touch screen (1 pcs) Fits: SV06 Plus

Main Board to Extruder and X Motor Cable (Wire Harness) Connects from mainboard to extruder and X motor Includes: Wire harness (1 pcs) Fits: SV07 Plus

Main Board to Extruder and X Motor Cable (Wire Harness) Connects from mainboard to extruder and X motor Includes: Wire harness (1 pcs) Fits: SV07

Mainboard to Extruder Cable (Extruder Wire Harness) Connects mainboard to extruder adapter board Includes: Cable (1 pcs) Fits: SV06 Plus

Main Board to Extruder Cable (Extruder Wire Harness) Connects mainboard to extruder adapter board Includes: Cable (1 pcs) Fits: SV06

  Creality Yellow Bed Leveling Spring Strong bed springs for Creality and other 3D printers. Fits most Creality printers that use bed springs.  Includes: Spring (1 pcs) Dimensions:Length: 30mm (un-sprung)OD: 8.2mmID:...

Coupling Connects Z axis lead screw to stepper motor Includes: Coupling (1 pcs)M3X10 socket head cap screw (2 pcs) Location: Z axis motor Fits: SV06SV06 Plus