Slice Engineering & Compatible

Slice Engineering & Compatible

Use the filter box below to narrow down the Slice Engineering parts you are looking for:

  • On Sale
    Fan for Mosquito Hotend

    25mm Fan for Mosquito Hot End - 12v

    OEM Part

    Now: $2.99
    Regular Price: $5.99
    12V Dual Ball Bearing 25mm Fan for Slice Mosquito Hotend 12 volt 3.64 CFM Molex connector 2 bolts included - mount directly to your Slice Mosquito or Mosquito Magnum hotend
    Now: $2.99
    Regular Price: $5.99
  • Prusa Mini Copperhead Heat Break

    Copperhead Heat Break Kit for Prusa MINI/+ | Slice Engineering

    Slice Engineering

    $34.90
    Slice Engineering Copperhead Heat Break for Prusa MINI/MINI+ The Copperhead Prusa MINI heat break is bimetallic, made of a copper outer body and an interior steel needle, which gives this heat break better cooling performance, allowing for a...
    $34.90
  • Groove Mount Adapter with Clip for Mosquito Hotend

    Groove Mount Adapter for Mosquito Hotend

    PB Select™

    $8.95
    Grove Mount Adapter for Mosquito Hotend This mount attaches directly to your Mosquito Hotend and will allow it to be mounted to a Bondtech QR, BMG or anywhere an E3D style hotend would mount. Use with Direct or Bowden setup Includes:Adapter (1...
    $8.95
  • Copperhead heat break for MK10

    Heat Break for Copperhead Hotend - MK10 | Slice Engineering

    Slice Engineering

    $29.95
    Slice Engineering Copperhead™ Heat Break for MK10 Bimetallic Heat Break™ - Stainless steel and Copper AlloyRated to 450 °C For more documentation on the Copperhead™ Heat Break, please see the Technical Specifications...
    $29.95
  • Slice Engineering 12v Heater Cartridge

    Heater Cartridge 12v 50w | Slice Engineering

    Slice Engineering

    $14.99
    Slice Engineering Heater Cartridge Includes: Heater cartridge (1 pcs) 12 volt50 watts22 mm LongDiameter sized to fit into a 6 mm H7 tolerance hole1.2 meter lead includedGenuine Molex™ connectors 
    $14.99
  • Hight temp 50 watt heater cartridge

    Heater Cartridge 24v 50w (fits Mosquito & Copperhead)

    PB Select™

    $13.95
    24 Volt, 50 Watt Premium HT Heater Cartridge Includes: Heater (1 pcs)Extension cable (1 pcs) Specifications: 24 volt 50 watt500c max temperature1 meter lead22 mm long cartridgeDiameter to fit 6 mm H7 hole310SS cartridge improves longevity and...
    $13.95
  • Slice Engineering 24v, 50 Watt Heater

    Heater Cartridge 24v 50w | Slice Engineering

    Slice Engineering

    $15.99
    Slice Engineering Heater Cartridge Includes: Heater cartridge (1 pcs) 24 volt50 watt1.5 meter lead22 mm long cartridgeDiameter to fit 6 mm H7 hole321SS cartridge improves longevity and durability
    $15.99
  • Nozzle Coat™ for 3D Printing

    Nozzle Coat | 4ml

    PB Select™

    $14.99
    Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...
    $14.99
  • Nozzle Torque Wrench from Slice Engineering

    Nozzle Torque Wrench | Slice Engineering

    Slice Engineering

    $29.99
    Slice Engineering 1.5nm Nozzle Torque Wrench  Includes: Torque wrench (1 pcs) This 1/4 inch nozzle torque wrench is just a tad larger than a 6mm nozzle, which gives you a little extra room in case of plastic build upCan be used with an...
    $29.99
  • Copperhead silicone sock

    Silicone Sock for Copperhead Hotend

    PB Select™

    $5.99
    Silicone Insulating Sock for Copperhead Hotend The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...
    $5.99
  • Silicone Sock for Mosquito Style Hotend

    Silicone Sock for Mosquito Style Hotend

    PB Select™

    $5.99
    PB Select™ Silicone Sock for Mosquito Hotend The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will...
    $5.99
  • Silicon Sock for Copperhead hotend

    Silicone Sock-X for Copperhead Hotend | Orange

    Levendigs

    $6.99
    Sock-X  Hotend not included This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Slice Copperhead.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent...
    $6.99
  • Silicone boot for mosquito hotend

    Silicone Sock-X for Mosquito Hotend | Orange

    Levendigs

    $6.99
    Sock-X  Hotend not included This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Slice Engineering Mosquito and Mosquito Magnum hotends.  The primary purpose of a silicone sock is to help keep...
    $6.99
  • Nozzle Torque Wrench Adapter

    Socket Adapter (1/4") for Slice Engineering Torque Wrench

    PB Select™

    $2.99
    Socket Adapter for Slice Engineering Torque Wrench This adapter allows for the use of 1/4 inch sockets with the Slice Engineering Nozzle Torque Wrench. With this adapter you can use the torque wrench with different size nozzles by using...
    $2.99
  • Slice Engineering 300c Thermistor

    Thermistor - Room Temp to 300°C | Slice Engineering

    Slice Engineering

    $29.95
    Slice Engineering 300°C Thermistor Includes:Thermistor (1 pcs)Dowel pin (1 pcs) Features: 2m long bare leads15mm long, 3 mm diameter cartridge. A standard for sleeved thermistorsCapable of reading from room temperature up to...
    $29.95