Bambu Lab

Silicone Sock for Hotend - 3 Pack The Hotend Silicone Sock is made from high-quality silicone for higher temperature resistance (rated to 300°C).The silicone sock provides optimal thermal insulation for the hotend to maintain a...

Silicone Sock for Hotend - 3 Pack The Silicone Sock for Hotend is made from high-quality silicone for higher temperature resistance (rated to 300°C printing temperatures). Ensuring optimal thermal insulation and tear resistance, the...

Sock-X for Bambu Labs Hotend This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Bambu Labs Hotend The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Spool Holder for Bambu Lab X1 and P1 Series Printers Spool holder is installed on the back of the printer and affixed with 2 screws. Includes: Spool holder (1 pcs)Mounting screws (2 pcs) Fits: Bambu Lab P1 SeriesBambu Lab X1...

Stainless Steel Extruder Unit The stainless steel extruder unit features double gears made of stainless steel, which increases extrusion force and prevents slippage. It is suitable for commonly used 3D printing filaments such as PLA, PETG, TPU, and...

Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality grease...

Super Lube® 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease. Includes: 1...

TH Board Set v9 (Dual Red Laser) for Bambu Lab X1 and X1C The Single Red Laser TH board is discontinued and has been replaced by the Dual Red Laser TH board. The Dual Red Laser TH board works with the Dual Red Laser LIDAR. Includes: Extruder...

  Bambu Lab Toolhead (TH) Board FPC Cable for P1 Series Printers The TH Board FPC Cable connects the extruder connection board (Interface board in the front) and the TH Board (in the rear) to supply power and data communication...

  Bambu Lab Toolhead Board FPC Cable for the X1 and X1C Model Printers the Toolhead Board Flexible Printed Circuit Cable (V9) connects the toolhead main board and the interface board. Includes: V9 FPC cable (1...

  Bambu Lab Toolhead Cable for P1 Series Printers The P1 Series toolhead cable connects the printer headboard and the motion control mainboard to supply power and data communication. The P1S version without rubber plug...

Bambu Lab WiFi Antenna for X1 Series Printers WiFi antenna enhances the strength and stability of wireless signals, so that devices can better receive and connect to the network. Includes: - WiFi antenna (1pcs) Fits: Bambu Lab X1...

Bambu Lab X-Axis Carbon Rods Assembly for X1 and P1 Series Printers The X-axis carbon rods carry the toolhead left and right. Fits: Bambu Lab P1 SeriesBambu Lab X1 Series Learn more about replacing the X-axis carbon rods...

Bambu Lab XY Belt for X1 and P1 Series Printers The XY belt is an open drive belt with a pitch length of 1442mm. Its main function is to transmit the motion of the motor to the tool head with high precision. Includes: Belt - 1442mm (1...

Bambu Lab XY Belt Tensioner with Pulley for the X1 and P1 Series Printers The XY belt tensioner with pulley is composed of an idler pulley and a bracket, which can change the belt travel distance under the tension of the spring...

Bambu Lab Motor (XY) for the X1 and P1 Series Printers The X or Y motors are installed on the back of the printer to drive the toolhead to move in the XY direction. A motor cable and a driving wheel are included. Includes: Motor (1...

Bambu Lab Z Belt for X1 and P1 Series Printers The Z belt is a close drive belt with a pitch length of 1142mm, it is installed at the bottom of the Bambu Lab X1/X1C printer. Its main function is to transmit the motion of the Z motor to the three...

Bambu Lab Z Belt Timing Pulley for the X1 and P1 Series Printers The Z belt timing pulley is located on the bottom side of the printer, and used to connect the Z axis leadscrew to the belt of the printer. Includes: Z belt pulley (1...

Bambu Lab Z Motor for the X1 and P1 Series Printers The Z-axis motor is a stepper motor that drives the movement of the heatbed in the Z-axis direction through the Z-axis synchronous belt. A motor cable and a driving wheel are included...

Z-Axis Tensioner for Bambu Lab X1 Series and P1 Series Printers The Z tensioner is a part that mounts on the bottom of the printer and is used to tension the Z timing belt. Includes: Tensioner (1 pcs)Hex screw (1 pcs)Hex...