MK3S

PB Select™ Prusa Compatible V2 P.I.N.D.A Probe Includes: V2 PINDA (1 pcs) Fits:MK2.5MK2.5SMK3MK3S To test your current PINDA probe, follow this guide from the Prusa Knowledge Base.

Prusa MMU2S-Einsy power cable Replacement MMU2S to Einsy power cable.  Includes: Cable (1 pcs) Fits:MK3 with MMU2SMK3S with MMU2SMK3S+ with MMU2S Note: Only compatible with the MK3/S/+. NOT compatible with MK2.5/S printers...

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Note: Power supply is not included

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Specs:Wire:18 AGWLength: 72 inches (approximately) Max Operating Temp: 105°C (221°F)

  Prusa Brass Nozzle Brush Prusa Brass Nozzle Brush is optimized for 3D printing with its short and dense bristles. Note: Please expect the bristles to bend during shipping, storage and usage; this is typical for brass brushes...

Prusa PSU - 24 Volts This is the replacement power supply unit ONLY. It does NOT come with any cables. Buy the MK3 PSU kit here.  Includes: Power supply unit (1 pcs) Specifications:Voltage: 24VDCWattage: 240WCurrent (MAX): 10AFuse:...

Prusa MK3 Power Supply Assembly Replacement Power supply unit 24V 240W (assembly). It is ONLY compatible with MK3/S/+. The PSU itself is also available separately, without any cables or fasteners. Includes:Power supply unit 24V...

PSU Cable Quick-release for Original Prusa Enclosure A quick-release connector for the 3D printer PSU cables. This is an ideal solution for everyone who often takes the printer out of the enclosure. This spare part is compatible only with the Original...

PB Select™ Prusa PSU Holder Nut - 2 Pack Nickel plated M3nE nut. Used to secure the PSU to the t-slot rail. Includes: M3nE Nut (2 pcs) Fits:Prusa MK2.5Prusa MK2.5SPrusa MK3Prusa MK3SPrusa MK3S+Prusa MINIPrusa MINI+ To replace this part, please...

Prusa Hotend PTFE Tube This is the replacement hotend PTFE tube. Includes: Hotend PTFE tube (1 pcs) Note: This is only compatible with the MK2.5S, MK3S and MMU2S hotends. It is not compatible with the MK2.5, MK3 and MMU2 hotends...

E3D 4mm Push Fit Collet (Collar) High quality replacement push fit collet with metal teeth. These are the small collets that fit E3D V6 and Prusa heatsinks. Includes: Collet (1 pcs)  Size:ID: 4mmOD: 5mm Fits: Bondtech ExtrudersE3D V6...

Raspberry Pi Zero 2W for PrusaLink This is the Zero 2W version which is more powerful than the standard Zero W version.  Add PrusaLink functionality to your printer and/or add your printer to Prusa Connect. The Raspberry Pi Zero 2W allows you...

3D Print Cleanup Tool - RB1000 Deburring Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as...

PB Select™ Hardware Kit Includes:M3x16 - fan to fan duct (4 pcs)M3x10 pan head - to clamp heater (2 pcs)M3x4 set screw for thermistor (2 pcs)M2 hex wrench (1 pcs)M1.5 hex wrench (1 pcs) For:E3D V6 Prusa MK2, MK3 SeriesRepRap

Revo™ High Flow Brass Nozzle The Revo High Flow Nozzle increases your setup's volumetric flow rate, enabling you to print faster. Revo High Flow maintains the exact same form factor as standard Revo Hotends. This means there is no need...

Revo™ Brass Nozzle Single Nozzle Includes: Revo nozzle of selected size (1 pcs)ORTriple pack includes: 1 each of 0.25, 0.60 & 0.80mm nozzles Fits: All E3D Revo hotends Notes: - You may need to adjust your Z offset when changing...

Revo Coldside Only - For Prusa MK2 and MK3 Series  Notes:  This is not a complete upgrade kit, this is the coldside only.You will also need to purchase a hotside pack if you do not already have one (see links below). Includes:1 x Revo Six...

Revo™ HeaterCore (With 104NT Thermistor) Includes:Heater cartridge/thermistor (1pcs)Spring (1 pcs)Silicone boot (1 pcs) Notes: Choose the correct voltage and wattage for your application.Before installing please read the HeaterCore wiring...

Revo High Flow, High Temp Abrasive (HF HT-A) Nozzle HF HT-A nozzles are high-temperature, high flow, abrasion-resistant nozzles. Much like ObXidian, these nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the...

Revo Starter Pack - 24 Volt  Note 1:  Please take care when making your product selection.The 104NT (E3D) comes with an E3D 104NT thermistor.The 100K (Creality) comes with a Creality specific HeaterCore and is not compatible with other...