MK4/S

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...

PB Select™ Nylon Spacer for Prusa Nextruder This is the spacer the seats into the Nextruder PG cover on the below listed printers.  Includes: Spacer (1 pcs) Size: 13x24x2,5mm Fits:Prusa MK3.9Prusa MK4Prusa XL Will also fits the...

NYLON 3x555 mm Includes: NYLON 3x555 mm (1 pc) Fits: Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

9mm SAC-1 Stainless-Steel Graphics Knife with 30-Degree Precision Blade High-quality precisely made stainless steel precision knife with an acute 30° snap angle for enhanced cutting control. Each blade offers seven cutting segments per blade...

Replacement Blades for the Olfa SAC-1 Precision Knife  High-quality precisely made stainless steel 9 mm blades with an acute 30° snap angle for enhanced cutting control. Each blade offers seven cutting segments per blade...

Original Prusa CHT Brass Nozzle These are the same nozzles that come stock on the new Prusa MK4S printers. Includes: CHT Brass Nozzle (1 pcs) Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please...

Nextruder Hotend Assembly with Brass Nozzle Fully assembled hotend for the Nextruder Nozzle Size: Select Above Includes:Nozzle of Selected Size (1pcs)Heaterblock (1pcs)Heater 40 W - 120 mm (1pcs)Thermistor NTC 100k - 115 mm...

Nextruder Hotend Assembly with High Flow CHT Brass Nozzle Fully assembled hotend for the Nextruder. This hotend comes with the High Flow CHT nozzle Nozzle Size: Select above  Includes:Prusa Brass High Flow CHT Nozzle* (1pcs)Heaterblock...

Nextruder Nozzle (choose size above) All-metal high-precision nozzle for the Nextruder combines both nozzle and heat break into one unit for leak free printing. Includes: Nozzle (1 pcs) Fits:CORE OneMK3.9MK3.9SMK4MK4SXL For the new generation of...

Nextruder V6 Nozzle Adapter This adapter makes your Nextruder compatible with any V6 nozzle. You can use it with the Original Prusa XL, MK3.9, MK4 and CORE One Includes: Adapter (1 pcs) Fits:CORE OneMK3.9MK3.9SMK4MK4SXL Note: Nozzle not...

PE Cable for LCD, xBuddy and PSU Includes: PE cable 460/420 mm (1 pc) Fits:MK3.5MK3.9MK3.9SMK4MK4S To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

PE Faston 6.3x0.8 Includes: PE Faston Connector (1 pcs) Fits: Prusa MK3.9Prusa MK3.9SPrusa Mk4Prusa MK4SPrusa XL To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa PEI-Ultem sheet Notes: 1. This is NOT the Spring steel sheet with smooth double-sided PEI.2. Tiny dots may appear on the PEI-Ultem surface. These can slightly affect the finished print bottom surface. However, they do not...

PEI Print Surface - 260x242mm - for Prusa and other printers Includes: PEI sheet with 3M adhesive backing (1 pcs) Notes:1. This is NOT the Prusa spring steel sheet with smooth double-sided PEI (Link).2. Tiny dots may appear on the PEI...

PG Assembly Adapter This tool printed from high quality PETG. It ensures that the gearbox is correctly aligned during the assembly or after a service. Includes: PG Assembly Adapter (1 pcs) Details: Version of this replacement: E1Required...

Planetary Gear Assembly & Planetary Gear Ring (PG Assembly + PG Ring) Includes:PG ring (1 pc)PG assembly (1 pc)  CAUTION:  Please replace both parts in your Nextruder, as it may not work properly if you replace one part...

McMaster-Carr® Polycarbonate Spacer for Prusa Nextruder PG Cover This is a clear spacer for the clear PG cover Includes: Spacer (1 pcs) Fits: Clear PG cover Material: PolycarbonateFor Screw Size: M12ID: 13.0 mmOD: 24...

Prusa MK4 Power Panic Cable (with 2 wires)  IMPORTANT  Before you buy this replacement cable, make sure your printer already has a power panic cable with two wires. Includes: Power panic cable (1 pcs) Fits: Prusa MK3...

Prusa Print Cooling Fan This is the blower fan that cools the part being printed. Includes: Fan (1 pcs) Fits: Prusa MK3.9Prusa MK4Prusa XL  To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa Print Cooling Fan This is the blower fan that cools the part being printed. Includes: Fan (1 pcs) Fits: Prusa MK3.9SPrusa MK4S Note: Does not fit MK4 To replace this part, please visit the Prusa knowledge base at help.prusa3d.com