MK4/S

Accelerometer Set An accelerometer module for those who seek to tweak and modify their 3D printers, with it you can measure the resonance frequency of each axis and recalibrate your input shaper to the optimal values, ensuring your modded 3D...

Prusa Hall Filament Sensor Also known as the LoveBoard Filament Sensor Includes: Filament sensor (1 pcs) Fits: Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please visit the Prusa knowledge base at help...

Prusa LoveBoard Includes: LoveBoard (1 pcs) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4S To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa NFC Set This is the replacement of the NFC parts on your printer. Includes:NFC coil (1 pc)NFC coil cable (1 pc)Double-sided tape (1 pc) Fits: Prusa MK4S To replace this part, please visit the Prusa knowledge base...

PE Faston 6.3x0.8 Includes: PE Faston Connector (1 pcs) Fits: Prusa MK3.9Prusa MK3.9SPrusa Mk4Prusa MK4SPrusa XL To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa PSU - 24 Volts This is the replacement power supply unit ONLY. It does NOT come with any cables. Buy the MK3 PSU kit here.  Includes: Power supply unit (1 pcs) Specifications:Voltage: 24VDCWattage: 240WCurrent (MAX): 10AFuse:...

  Wi-Fi Adapter ESP-01S Use this wireless adapter to add Wi-Fi to your MINI+ & MK4. Once installed you can send G-codes from your PC directly to the printer, start & stop prints, monitor the current status or temperatures...

Prusa Wi-Fi Adapter Use this wireless adapter to add Wi-Fi to your printer. Once installed you can send G-codes from your PC directly to the printer, start & stop the print and also monitor the current status or temperatures. Includes: Wi-Fi...

Prusa xBuddy Board  Important  This xBuddy board is compatible only with two-wire Power Panic (black & white wires). Check your cables, before you order this part. Includes: xBuddy board (1 pcs)Thermal pads (3...

xLCD Board Replacement xLCD board for the xLCD assembly. You need Firmware version 4.7.5 or newer for this display to work properly. See below, which printers are compatible. Includes: xLCD board (1 pcs)  Important Note: XL...