MMU2S/MMU3

PB Select™ Idler Springs for Prusa Extruder Latch & MMU2S/3 Includes: Idler spring (2 pcs) Fits:MK2.5MK2.5SMK3MK3SMK3S+MiniMini+MMU2SMMU3 To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

PB Select™ Hobbed Gear Includes:Hobbed Gear (1 pcs)Grub screw (1 pcs) Location: Extruder Fits:MK2MK2SMMU2SMMU3 To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

PB Select™ M3 Stainless Steel Square Nuts These thin square nuts work in many applications that require a thinner (1.75mm) square nut. Including E3D Hemera Stepper Motors, Prusa Printers and Bondtech Extruders. Includes: Square Nut (10...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

PB Select™ PTFE Tube for Prusa MMU2S  This is the replacement PTFE tube for the MMU2S Front-PTFE-holder. Includes: PTFE tube (1 pcs) Note: This is the 19mm PTFE tube only, it does not include the PTFE holder (pictured)...

PTFE Tube 2.5MM ID Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 2.5mm (±0.25mm) Outside Diameter: 4mm (±0.25mm) Color: White Max Working Temp:...

Standard PTFE Tube - White Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 2mm (± .1mm) Outside Diameter: 4mm Color: White Max Temp: 240°c This is nice quality...

M4X5 Set Screw 12.9 Grade Flat Point Uses 2mm Hex Key Driver Sold in units of one.    

PB select™ Steel Ball & Magnets for Prusa Filament Runout Sensor and MMU3 Includes:19x6x2mm magnet (1 pcs)10x6x2mm magnet (2 pcs)7mm magnetic steel ball (1 pcs)

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...