Printer Parts

PB Select™ 3mm Nylon Filament  This 3mm nylon filament is used in the wiring harness of Prusa i3 printers.The length is 50cm which is the proper length for the extruder wiring harness. It can be cut down to 30cm if you need it...

  Bambu 4-in-1 PTFE Adapter The Bambu 4-in-1 PTFE Adapter is an adapter used to connect the PTFE tube. Compared to the original PTFE tube connector, the 4-in-1 adapter can connect 4 feeder modules to the printer at the same time. (up to 7...

  4010 Extruder Fan for MakerGear M2 - 12 volt  Includes: Fan (1 pcs) Voltage: 12 VDCSize: 40x40x10mmLocation: Extruder or electronics caseLength: Micro-Fit 3.0 43020 Fits: M2 (12 volt version) This is the...

PB Select™ Metal Fan Guard Includes: Fan guard (1 pcs) Fits: 40x40mm fans Note: Mounting screws not included

  Creality Ender-3 V2 Blower Fan This is the fan that cools the part when printing Includes: Blower Fan (1 pcs) Fits: Ender-3 V2Ender-3 V2 NeoCR-200B

  4010 Extruder Fan This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against incorrect plug-in. All fans should be kept free of...

  4015 Bed Fan This is the fan the cools the part being printed. It is sometimes called the print or part cooling fan.  Includes: Fan (1 pcs) Voltage: 24 VDCSize: 40x40x15mmConnector: Micro-Fit 3.0 43020 Fits: M3    

24-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in.  Fits: All MakerGear M3s    

  5010 Extruder Fan for MakerGear M2 - 12 volt  Includes: Fan (1 pcs) Voltage: 12 VDCSize: 50x50x10mmLocation: ExtruderConnector: Micro-Fit 3.0 43020 Fits: M2 (12 volt version) Mounted at a 45 degree angle in...

  5010 Extruder Fan for MakerGear M2 Dual Extruder - 24 volt  Includes: Fan (1 pcs) Voltage: 24 VDCSize: 50x50x10mmLocation: ExtruderConnector: Micro-Fit 3.0 43020Fits: M2 Dual Extruder  This fan has longer...

  5010 Extruder Fan for MakerGear M2 - 24 volt Includes: Fan (1 pcs) Voltage: 24 VDCSize: 50x50x10mmLocation: Extruder Fits: M2 (24 volt version) Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm...

  E3D Dual Ball Bearing Blower Fan - 50x50x15mm 12v These fans have the E3D seal of approval. Great for the Prusa MK2 or Use anywhere else you need a good quality ball bearing blower fan. Includes: Fan (1...

  Flashforge Y Stepper Motor Cable This stepper motor cable is designed for the Flashforge Guider 2, but may be used for other applications. Includes: Cable (1 pcs) Connector A: PH 6 PinConnector B: XH 4 Pin Length:...

6025 Dual Ball Bearing Fan Includes: Fan (1 pcs) Specs:Dual Ball Bearing12VDC0.20ALead Length: 270mm (Approximately)Plug Type: 2510 2.54mm 2 Pin Size: 60x60x25mm Note: Brand will either be Son Times or The Source of the Wind

  6063 GT Pulley Includes: 6063 2GT Pulley (1 pcs) Fits: Creator 4 Note: 2 set screws needed for installation (not included). Set screws available here.

6mm Bed Magnets for R1+ Glass Bed Please note: These magnets are 6mm thick, they work with the latest v2.5 R1 bed, which requires 6mm magnets. Apply using this epoxy and clamps for best results. Includes: Bed magnet (4...

  Please read our returns policy regarding electronic items 7" Touch Screen Includes: Touch Screen (1 pcs) Fits: Guider 3 PlusGuider 3 Ultra Note: Does not include main board or driver board.  WARNING  The touch...

  Prusa 7mm Ball - Zync Coated Includes: 7mm ball (1 pcs) Fits: Prusa MMU3 To correctly install this replacement part, visit help.prusa3d.com, select your specific printer model, and follow the instructions provided in the repair...

AC Board For Bambu Lab X1 and P1 Series Printers The AC board is a circuit board providing AC power for the X1 Series and P1 Series heatbed. Includes: AC board (1 pcs) Fits: Bambu Lab X1 SeriesBambu Lab P1 Series Learn more...

Accelerometer Includes: Accelerometer (1 pcs) Fits: Sovol SV07Sovol SV07 Plus