Printer Parts

   Like New  Removed from new or low hour 3D printer. Flashforge Linear Rod Includes: Linear rod (2 pcs)Brackets (2 pcs) Note: Does not include the mounting hardware  Size: 10x290mm Location: Z...

  Liquid Glue for Build Plate (Print Bed Adhesive) The Bambu Lab Liquid Glue is an adhesive specially developed for 3D printing, suitable for printing materials such as PLA, ABS, and PETG on all Bambu Lab build plates. When using Bambu Lab Liquid...

MYT LM10LUU Linear Bearings Note: These are L bearings which are longer than standard linear bearings.  Includes: Linear Bearing (4 pcs) Specifications:ID: 10mmOD: 19mm

Prusa LoveBoard Includes: LoveBoard (1 pcs) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4S To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa Lubricant Applicator Set Includes: Lubricant 5g (1 pcs)Applicator (1 pcs) After a certain period of time (see the 3D Printing Handbook), your printer should be cleaned and greased in order to work properly.  No need to apply...

Prusa Lubrication set   Lubrication set for linear rails (3-6 months interval). Includes: Lubricant 5g (1 pcs)Applicator (1 pcs) After a certain period of time (see the 3D Printing Handbook), your printer should be cleaned...

M2.3x6mm Blunt Nose, Pan Head Screw Set Includes: Screws (2 pcs) Head: PanSize: M2.6Length: 6mmType: Blunt nose

M2x6mm Blunt Nose Screw Set Includes: Screws (5 pcs) Head: PanSize: M2Length: 6mmType: Blunt nose

M2™ Hardened High Speed Steel - Volcano Compatible Nozzle The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and tempered to...

M3 Brass Thread Insert - 4 Pack Size: M3 OD: 4.6mm Length: 5mm Recommended hole diameter: 4.0 mm For easy installation use the Heat-Set Insert Soldering Iron Tips

PB Select™ M3 Stainless Steel Square Nuts These thin square nuts work in many applications that require a thinner (1.75mm) square nut. Including E3D Hemera Stepper Motors, Prusa Printers and Bondtech Extruders. Includes: Square Nut (10...

M3 Leaf Spring T-Slot Nut (3030) Plated roll-in t-slot nut with leaf spring. Includes: M3 T-Slot nut with leaf spring (5 pcs) Size:(Measured by hand - sizes are approximate)Length: 19.5mmWidth: 12mmHeight: 6.5mm Fits:3030 extrusionPrusa...

Socket Head Cap Screw - 4 pack Size: M3x16 Includes: M3x16 socket head cap screw (4 pcs) Used in the following locations on the printers listed below:Extruder to carriageFan to heatsinkStepper motor mounting. Fits:Creator Pro 2Creator Max 2

M3 Flat Head Screw  Includes: Flat head screw (3 pcs) Size: M3x32  Fits:Sidewinder X1Genius

Motor Mount Bolt for Creator Pro, Inventor and Dreamer Holds the fan, heatsink and motor to the mounting block Includes: M3x40 socket head cap screw (4 pcs) Size: M3x40 Fits:Creator ProCreator MaxInventorDreamer Note: These do not fit the Dreamer NX...

PB Select™ M3x6r Screw Set - Prusa MK3.9/4 Round head stainless steel screws for the expansion joints Includes: Screw (10 pcs) Size: M3x6mm Fits: Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4S To replace this part, please consult the...

M4 Brass Thread Insert - 4 Pack Size: M4 OD: 6mm Length: 5mm Recommended hole diameter: 5.25 mm For easy installation use the Heat-Set Insert Soldering Iron Tips

M4 Leaf Spring T-Slot Nut Plated roll-in t-slot nut with leaf spring. Includes: M4 T-Slot Nut (1 pcs) Size:(Measured by hand - sizes are approximate)Length: 18.5mmWidth: 12mmHeight: 6.5mm Fits: Prusa XL (spool holder)

M5 Brass Thread Insert - 4 Pack Size: M5 OD: 7.5mm Length: 6mm Recommended hole diameter: 6.75 mm For easy installation use the Heat-Set Insert Soldering Iron Tips

Prusa OEM Festo (Push Fit) Connector Includes: M5-4 Festo fitting (1 pcs) Fits: MMU2SMMU3Prusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.