Printer Parts

  4010 Extruder Fan This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against incorrect plug-in. All fans should be kept free of...

  4015 Bed Fan This is the fan the cools the part being printed. It is sometimes called the print or part cooling fan.  Includes: Fan (1 pcs) Voltage: 24 VDCSize: 40x40x15mmConnector: Micro-Fit 3.0 43020 Fits: M3    

24-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in.  Fits: All MakerGear M3s    

  5010 Extruder Fan for MakerGear M2 - 12 volt  Includes: Fan (1 pcs) Voltage: 12 VDCSize: 50x50x10mmLocation: ExtruderConnector: Micro-Fit 3.0 43020 Fits: M2 (12 volt version) Mounted at a 45 degree angle in...

  5010 Extruder Fan for MakerGear M2 Dual Extruder - 24 volt  Includes: Fan (1 pcs) Voltage: 24 VDCSize: 50x50x10mmLocation: ExtruderConnector: Micro-Fit 3.0 43020Fits: M2 Dual Extruder  This fan has longer...

  5010 Extruder Fan for MakerGear M2 - 24 volt Includes: Fan (1 pcs) Voltage: 24 VDCSize: 50x50x10mmLocation: Extruder Fits: M2 (24 volt version) Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm...

  E3D Dual Ball Bearing Blower Fan - 50x50x15mm 12v These fans have the E3D seal of approval. Great for the Prusa MK2 or Use anywhere else you need a good quality ball bearing blower fan. Includes: Fan (1...

6025 Dual Ball Bearing Fan Includes: Fan (1 pcs) Specs:Dual Ball Bearing12VDC0.20ALead Length: 270mm (Approximately)Plug Type: 2510 2.54mm 2 Pin Size: 60x60x25mm Note: Brand will either be Son Times or The Source of the Wind

  6063 GT Pulley Includes: 6063 2GT Pulley (1 pcs) Fits: Creator 4 Note: 2 set screws needed for installation (not included). Set screws available here.

6mm Bed Magnets for R1+ Glass Bed Please note: These magnets are 6mm thick, they work with the latest v2.5 R1 bed, which requires 6mm magnets. Apply using this epoxy and clamps for best results. Includes: Bed magnet (4...

  Please read our returns policy regarding electronic items 7" Touch Screen Includes: Touch Screen (1 pcs) Fits: Guider 3 PlusGuider 3 Ultra Note: Does not include main board or driver board.  WARNING  The touch...

7mm Steel Ball (Magnetic) Includes: Steel ball (1 pcs) Fits: Prusa MINIPrusa MINI+Prusa MK3Prusa MK3SPrusa MK3S+Prusa MK3.5SPrusa CORE One To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

AC Board For Bambu Lab X1 and P1 Series Printers The AC board is a circuit board providing AC power for the X1 Series and P1 Series heatbed. Includes: AC board (1 pcs) Fits: Bambu Lab X1 SeriesBambu Lab P1 Series Learn more...

Accelerometer Includes: Accelerometer (1 pcs) Fits: Sovol SV07Sovol SV07 Plus

Accelerometer Set An accelerometer module for those who seek to tweak and modify their 3D printers, with it you can measure the resonance frequency of each axis and recalibrate your input shaper to the optimal values, ensuring your modded 3D...

  Activated Carbon HEPA Filter Includes: Activated carbon filter (1 pcs) Fits: Guider 2S/HTRobo E3 Pro

Air Filter for Bambu Lab P1S and X1 Series printers  Includes: Activated carbon filter (1 pcs) Fits: Bambu Lab X1 SeriesBambu Lab P1S Instructions:The X1-Carbon comes with a carbon filter which is used for filtering the air from...

Advanced Filtration for Prusa CORE OneThe Advanced Filtration System with HEPA and carbon filters is useful when printing ASA and other materials that produce larger volumes of ultra-fine particles and fumes during printing. This spare part is...

Extruder Air Duct  Directs air to the part being printed. MJF/SLS printed in nylon (PA12) for durability and temperature resistance. Includes:Air Duct (1pcs)Mounting screw (1 pcs) Fits: Dreamer NX

Used Item  Removed from low hour 3D printers. Extruder Air Duct  Directs air to the part being printed. Includes:Air Duct (1pcs) Fits: Dreamer NX