Parts, Accessories & Supplies

High Temperature Heater Block for Revo Hotend This plated copper HeaterBlock allows you to reach up to 500°C with your Revo system (providing you use a PT100 or PT1000), unlocking the possibilities of printing...

  All Metal Hotend Kit for Creality CR-6 SE / CR-6 MAX / CR-10 Smart Kit comes standard with a  0.40mm  MK8 nozzle. Fits:CR-6 SECR-6 SE MaxCR-10 Smart *Fan Adapter required Installation Instruction Video by Embrace Making for...

  Micro Swiss Lightweight Direct Drive Extruder (Extruder Only Version) This is the "extruder only" version and does not include a hotend. The Micro Swiss All Metal Hotend is available for purchase here  Important Note There has been...

LGX Accessories For Artillery Sidewinder and Genius Includes:1x LGX PA12 Fan Shroud;1x LGX PA12 Fan Mount1x ALU Mount Plate1x 5015 24V radial fan6x M3x6 Allen screw Low Head1x M3x25 Allen screw Low Head1x M3x10 Allen screw...

Prusa MK2.5S/MK3S/+ Mosquito Upgrade Kit This kit is used to upgrade a current Bondtech extruder to use a Mosquito hotend. Includes:1x SLS 3D printed front housing1x SLS 3D printed back housing1x SLS 3D printed Mosquito fan shroud1x SLS 3D printed...

 Important Shipping Notes  - Ships to the US and Canada only- Cannot be shipped to PO boxes- Drop ships directly from PrintDry, please allow an additional 3-4 day processing time- Ships from Canada- Only ships UPS/FedEx ground, no...

Revo™ ObXidian Nozzles The Revo ObXidian is specifically designed for printing fibre-filled polymers. ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the...

Bondtech LGX® Lite Large Gears eXtruder (motor not included) The Bondtech LGX® Lite is based on the LGX® Large Gears eXtruder and uses Bondtech’s new Dual Drive Technology based on larger drive gears...

  All Metal Hotend Kit with Slotted Cooling Block for Wanhao i3 This upgrade includes a modified thermal barrier tube, nozzle and cooling block. The thermal barrier tube is made from 2 different materials: The lower thermal break is made from...

DDX Adapter Set For Creality Ender-3 / CR-10 Note: Does not fit DDX V3 This set is necessary to install a DDX Upgrade Kit on the models listed below. Fits: Ender-3 CR-10 CR-10S CR-10 S4 CR-10 S5 Requires your printer to have a 40x40x10mm Radial Fan...

  Micro Swiss Dual Gear Bowden Extruder This Bowden Dual Gear Extruder features the same quality construction as the Micro Swiss Direct Drive extruders. It is designed to be a bolt-on replacement to most of...

Magigoo 3D Printing Adhesive Magigoo ensures strong adhesion to a hot print surface, but easy release when the print surface cools down.Non-toxic and easy to clean with water. Size: 120ml  Includes: Magigoo original (1 bottle) Works with:...

E3D V6 ObXidian Nozzle V6 nozzles are designed for use with the E3D V6 heater block. Use small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger 3D prints. Includes: Nozzle of selected size (1...

Revo™ High Flow Brass Nozzle The Revo High Flow Nozzle increases your setup's volumetric flow rate, enabling you to print faster. Revo High Flow maintains the exact same form factor as standard Revo Hotends. This means there is no need...

DDX v3 Adapter Set for Creality CR-10S Pro/Max This set is necessary to install a DDX Upgrade Kit on the models listed below. Creality CR-10S Pro Creality CR-10S Pro V2 * - BLTouch bracket needed Creality CR-10 Max * - BLTouch bracket...

 Important Shipping Notes - Ships to the US and Canada only- Cannot be shipped to PO boxes - Drop ships directly from PrintDry, please allow an additional 3-4 day processing time- Ships from Canada- Only ships UPS/FedEx ground, no...

Bondtech CHT BiMetal Nozzle - M6 Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Includes: Nozzle of...

Bondtech LGX™ X-Carriage Prusa MK3S This LGX™ X-carriage is required to install the Bondtech LGX for MK3S & Mosquito Includes: SLS X-Carriage Front (1 pcs)SLS X-Carriage Rear (1 pcs)M3x10 Screws (5 pcs)M3 square nut (5 pcs)M3...

DDX v3 Adapter Set For Creality Ender and CR-10 Note: Only fits DDX v3 This set is necessary to install a DDX v3 upgrade kit on the models listed below. Compatibility Table To use with 40x40x10 fans on: Creality Ender-3 Ender-3 v2 Ender-3 Pro Creality...

  SLS X-Carriage kit for Prusa i3 MK3S Note: This X-Carriage kit is required to install the Bondtech Upgrade Kit for Prusa. This is very similar to the original X-Carriage Kit. The main difference is the 3D printed technology used to...