Micro-Swiss

Tension hardware kit for Direct Drive Extruder This is a spare tension hardware kit for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  Tension Pin Sprint Tension...

Tension lever for Micro Swiss Direct Drive Extruder This is a spare tension lever for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  Comes with gear and shoulder bolt

Motor Gear for Direct Drive Extruder This is a spare motor gear for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  Precision CNC machined teeth  Hardened tool...

Hardware kit for Direct Drive Extruder This is a spare hardware kit for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  This kit contains: 1x Beveled PTFE liner 3x M3 x .5 x...

Extension Cable for Direct Drive Extruder This is a spare Extension Cable for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  67cm long  

Main Body for Micro Swiss Direct Drive Extruder configured for Linear Rail System Fits: Printers with MGN12 Linear Rail with MGN12H Carriage Block Only for printers with bottom...

Main Body for Micro Swiss Direct Drive Extruder configured for ExoSlide System Fits Printers with ExoSlide System CNC Machined and Assembled in USA

Micro Swiss MK10 Plated Wear-Resistant Nozzle - 0.20mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal...

Micro Swiss MK10 Plated Wear-Resistant Nozzle - 0.80mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal...

Micro Swiss MK10 Plated Wear-Resistant Nozzle - 0.60mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal...

Micro Swiss MK10 Plated Wear-Resistant Nozzle - 0.30mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal...

Micro Swiss MK10 Plated Wear-Resistant Nozzle - 0.40mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal...

Micro Swiss MK8 All Metal Hotend Kit This is an all metal hotend upgrade kit for Flashforge Finder, Inventor 2 and Guider 2 printers Micro Swiss' all metal hotend allows you to print at much higher...

M2 Hardened High Speed Steel Nozzle - MK8 (CR10 / Ender / Tornado / MakerBot) Size: 0.8mm The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick...

M2 Hardened High Speed Steel Nozzle - MK8 (CR10 / Ender / Tornado / MakerBot) Size: 0.6mm The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick...

M2 Hardened High Speed Steel Nozzle - MK8 (CR10 / Ender / Tornado / MakerBot) Size: 0.4mm The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick...

Micro Swiss Lightweight Direct Drive Extruder (Extruder Only Version) This is the "extruder only" version and does not include a hotend. The Micro Swiss All Metal Hotend is available for...

Micro Swiss Lightweight Direct Drive Extruder with All Metal Hotend This version includes a Micro Swiss All Metal Hotend. The "Extruder Only" version is available for purchase here...

Heat Break (Thermal Tube) for Micro Swiss MK10 / MK11 All Metal Hotend Kits This is a replacement heat break for the Micro Swiss MK10/MK11 hotends. The lower thermal break is made from...

Micro Swiss Heat Break (Thermal Tube) for All Metal Hotend Kit  Fits: Finder Inventor 2 Guider 2

Set of 3 Bowden Collets for Micro Swiss CR10 Hotend kit Fits: Micro Swiss hotend for CR-10 / Ender Kit Micro Swiss hotend for CR-10s Pro Kit

MK10 All Metal Hotend Kit - Micro Swiss Included Nozzle Size: 0.40mm This is an all metal hotend upgrade for MK 10 style extruders. The lower portion of the thermal break is made from...

Micro Swiss Lightweight Direct Drive Extruder (Extruder Only) This is the "extruder only" version and does not include a hotend. The Micro Swiss All Metal Hotend is available for purchase...

Micro Swiss Lightweight Direct Drive Extruder with All Metal Hotend This version includes a Micro Swiss All Metal Hotend. The "Extruder Only" version is available for purchase here...

Micro-Swiss E3D Compatible Nozzle, Plated A2 Tool Steel, M6 Threads - 0.60mm This is a RepRap style nozzle, made from A2 tool steel, heat treated to 57-62 RC and plated with TwinClad...

Micro Swiss MK8 Wear Resistant Nozzle - 0.80mm Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction. It offers...

Micro Swiss MK8 Wear Resistant Nozzle - 0.60mm Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction. It offers...

Micro Swiss MK8 Wear Resistant Nozzle - 0.40mm Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction. It offers...

Micro Swiss MK8 Wear Resistant Nozzle - 0.30mm Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction. It offers...

Micro Swiss MK8 Wear Resistant Nozzle - 0.20mm Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction. It offers...

  M2 Hardened High Speed Steel RepRap RepRap - M6 Thread for 1.75mm Filament   Size: 0.80mm The M2 nozzles are designed for high temperatures, abrasion resistance and with superior...

M2 Hardened High Speed Steel RepRap RepRap - M6 Thread for 1.75mm Filament Size: 0.60mm The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick...

All Metal Hotend with Slotted Cooling Block for Duplicator 6 This is the Micro Swiss all metal hotend kit for Wanhao Duplicator 6 with the following improvements: Significantly better heat...

All Metal Hotend Kit with Slotted Cooling Block for Wanhao i3 This is the Micro Swiss all metal hotend upgrade with redesigned cooling block for Wanhao i3, Wanhao i3 Plus and all...

Micro Swiss All Metal Hotend Kit for Flashforge Finder/Inventor 2/Guider 2, 2S /Dremel 3D40 This is an all metal hotend upgrade kit for Flashforge Finder, Inventor 2 and Guider 2 printers Micro...

Micro Swiss MK10 Plated Wear-Resistant Nozzle - 0.50mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal...

Micro-Swiss MK10 A2 Tool Steel Wear-Resistant Nozzle - 0.80mm    Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has...

Micro-Swiss MK10 A2 Tool Steel Wear-Resistant Nozzle - 0.60mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely...

Micro-Swiss MK10 A2 Tool Steel Wear-Resistant Nozzle - 0.40mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely...

MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend M7 Threads - 0.60mm This is a MK 10 style nozzle, made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a...

MK10 Plated Wear-Resistant Nozzle for PTFE-Lned Hotend M7 Threads - 0.50mm This is a MK10 style nozzle, made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a...

MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend M7 Threads - 0.40mm This is a MK10 style nozzle, made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a...

Original Creality CR-10s Pro Nozzle with M6x.75mm Threads - 0.60mm  The Micro Swiss plated wear resistant nozzle starts as a precision machined brass nozzle and then has the Micro Swiss...

Original CR-10s Pro Nozzle with M6x.75mm Threads - 0.40mm  The Micro Swiss plated wear resistant nozzle starts as a precision machined brass nozzle and then has the Micro Swiss TwinClad XT...

M2 Hardened High Speed Steel RepRap RepRap - M6 Thread for 1.75mm Filament Size: 0.40mm The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick...

Thermal Break for Micro Swiss All Metal Hotend Kit for CR-10 Printers Replacement heat break for Micro-Swiss All Metal Hotend Kit Made from Grade 5 Titanium Fits Micro Swiss All Metal Hotend...

MK8 Thermal Tube Upgrade Made with TwinClad XT coated stainless steel. This Electroless Nickel composite coating is very low friction and used a lot in injection molding for its release properties...

Micro Swiss All Metal Hotend Kit for CR-10/Ender/Tornado/X5S/U20 Kit includes 0.40mm nozzle  Key benefits: No printer modification needed - this kit is a drop-in replacement for the...

Micro-Swiss E3D Compatible Nozzle, Plated A2 Tool Steel, M6 Thread - 0.80mm This is a RepRap style nozzle, made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT...

Micro-Swiss Robo 3D Wear-Resistant Nozzle with M6 Threads - 0.30mm This is a M6 thread, Hexagon hotend style nozzle, made from a 360 brass base material and plated with TwinClad XT...

Micro Swiss Wear-Resistant Nozzle for Robo 3D - 0.50mm  For 1.75mm diameter filament This is a M6 thread, Hexagon hotend style nozzle. It is made from a 360 brass base material...

Micro Swiss Wear-Resistant Nozzle for Robo 3D - 0.80mm  This is a M6 thread, Hexagon hotend style nozzle. It is made from a 360 brass base material and plated with TwinClad XT...

Micro Swiss All Metal Hot End for Creality CR10S Pro Kit comes standard with a 0.40mm nozzle. Fits: CR-10s Pro CR-10s Pro V2 CR-10 Max  Key benefits of the Micro Swiss All Metal...

Micro Swiss Wear-Resistant Nozzle for Robo 3D Printers - 0.40mm   This is a M6 thread, hexagon hotend style nozzle, made from a 360 brass base material and plated with...

Micro-Swiss E3D Compatible Nozzle, Plated A2 Tool Steel, M6 Threads - 0.40mm This is a RepRap style nozzle, made from A2 tool steel, heat treated to 57-62 RC and plated with TwinClad...