Nozzles

Brass Nozzle for CR10S Pro Size: 0.20mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 

Brass Nozzle for CR10S Pro Size: 0.40mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 

Brass Nozzle for CR10S Pro Size: 0.60mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 

Brass Nozzle for CR10S Pro Size: 0.80mm .75mm thread pitch for CR-10S Pro. These nozzles are only for the Pro version and will not work on a standard CR10/S hotend. Fits: CR-10S Pro 

Original CR-10s Pro Nozzle with M6x.75mm Threads - 0.40mm  The Micro Swiss plated wear resistant nozzle starts as a precision machined brass nozzle and then has the Micro Swiss TwinClad XT coating applied. The result is a premium nozzle...

Original Creality CR-10s Pro Nozzle with M6x.75mm Threads - 0.60mm  The Micro Swiss plated wear resistant nozzle starts as a precision machined brass nozzle and then has the Micro Swiss TwinClad XT coating applied. The result is a...

1.75mm Dyna-Purge® 3D Clean™ Filament Sticks 50 sticks of Dyna-Purge® 3D Clean™ 1.75mm filament arrives in an easy-open tube. Please Note: Not recommend for Bowden drives. For Bowden drive printers, use the DynaPurge Coil. Use...

2.85mm Dyna-Purge® 3D Clean™ Filament Sticks 50 sticks of Dyna-Purge® 3D Clean™ 2.85 filament arrives in an easy-open tube. Please Note: The DynaPurge sticks are not recommend for Bowden drive printers. Use Between Materials and...

E3D Volcano Nozzle - 0.60mm  Volcano nozzles are super fast printing nozzles for use with the Volcano block and prints large layer heights at extremely high flow rates. Volcano nozzles have extra long heated melt zones for ultimate filament melt...

E3D Volcano Nozzle - 0.80mm  Volcano nozzles are super fast printing nozzles for use with the Volcano block and prints large layer heights at extremely high flow rates. Volcano nozzles have extra long heated melt zones for ultimate filament melt...

E3D Volcano Nozzle - 1.00mm  Volcano nozzles are super fast printing nozzles for use with the Volcano block and prints large layer heights at extremely high flow rates. Volcano nozzles have extra long heated melt zones for ultimate filament melt...

0.25mm brass nozzle for your INTAMSYS FUNMAT HT 3D Printer

0.60mm CuCrZr brass nozzle for your INTAMSYS FUNMAT HT 3D Printer. Precision ground in CuCrZr brass for the best performance.

    H6 Hardened Steel Nozzle for MakerGear V4 Hot End Nozzle Size: 0.60mm For 1.75mm diameter filament. Sold in units of 1 This wear-resistant, high lubricity nozzle is suited for the V4 Hot End. These nozzles are...

    H4 Hardened Steel Nozzle for MakerGear V4 Hot End Nozzle Size: 0.40mm For 1.75mm diameter filament. Sold in units of 1 This wear-resistant, high lubricity nozzle is suited for the V4 Hot End. These nozzles are manufactured...

H5 Hardened Steel Nozzle for MakerGear V4 Hot End   Nozzle Size: 0.50mm   For 1.75mm diameter filament.   Sold in units of 1   This wear-resistant, high lubricity nozzle is suited for the V4 Hot End. These nozzles...

0.35mm V4 Brass Nozzle for your MakerGear printer Sold in units of 1 Suitable for the MakerGear V4 Hot End, this nozzle is precision-machined in brass. To swap a nozzle, it is important to remove the hot end from the mount first or the barrel...

0.50mm V4 Brass Nozzle for your MakerGear printer Sold in units of 1 Suitable for the V4 Hot End, this nozzle is precision-machined from brass. To swap a nozzle, it is important to remove the hot end from the mount first or the barrel will likely be...

0.75mm V4 Brass Nozzle for your MakerGear printer Sold in units of 1 Suitable for the V4 Hot End, this nozzle is precision-machined from brass. To swap a nozzle, it is important to remove the hot end from the mount first or the barrel will likely be...

0.50mm V4 Stainless Steel Nozzle for your MakerGear Printer Sold in units of 1 Suitable for the V4 Hot End, this nozzle is precision-machined from stainless steel. To swap a nozzle, it is important to remove the hot end from the mount first or the...

Micro-Swiss MK10 A2 Tool Steel Wear-Resistant Nozzle - 0.40mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro...

Micro-Swiss MK10 A2 Tool Steel Wear-Resistant Nozzle - 0.60mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro...

Micro-Swiss MK10 A2 Tool Steel Wear-Resistant Nozzle - 0.80mm    Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with...

MK10 Brass Nozzle Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube. Filament Size: 1.7mm Orifice...

MK10 Brass Nozzle Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube. Filament Size: 1...

MK10 Brass Nozzle Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube. Filament Size: 1...

MK10 Brass Nozzle Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube. Filament Size: 1.75mm Orifice...

MK10 Brass Nozzle for PTFE Lined Hotend Orifice Size: 0.20mm Please note: The 0.20mm nozzles have no markings to indicate the size Fites: Flashforge Guider 2 (not high tamp version) Flashforge Inventor Flashforge Inventor 2S FlashForge...

MK10 Brass Nozzle for PTFE Lined Hotend Orifice Size: 0.40mm Fites: Flashforge Guider 2 (not high tamp version) Flashforge Inventor Flashforge Inventor 2S FlashForge Creator Pro/Max FlashForge Dreamer/NX FlashForge Finder Qidi Tech...

MK10 Brass Nozzle for PTFE Lined Hotend Orifice Size: 0.60mm Fites: Flashforge Guider 2 (not high tamp version) Flashforge Inventor Flashforge Inventor 2S FlashForge Creator Pro/Max FlashForge Dreamer/NX FlashForge Finder Qidi Tech...

MK10 Brass Nozzle for PTFE Lined Hotend Orifice Size: 0.80mm Fites: Flashforge Guider 2 (not high tamp version) Flashforge Inventor Flashforge Inventor 2S FlashForge Creator Pro/Max FlashForge Dreamer/NX FlashForge Finder Qidi Tech...

MK10 H4 Hardened Steel Nozzle from Performance 3D  Orifice size: 0.40mm For 1.75mm diameter filament Only for PTFE lined hotends This wear-resistant, high lubricity nozzle is suited for any printer that uses an MK10 nozzle. These nozzles are...

MK10 H6 Hardened Steel Nozzle from Performance 3D  Orifice size: 0.60mm For 1.75mm diameter filament Only for PTFE lined hotends This wear-resistant, high lubricity nozzle is suited for any printer that uses an MK10 nozzle. These nozzles are...

MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend M7 Threads - 0.40mm This is a MK10 style nozzle, made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction...

Micro Swiss MK10 Plated Wear-Resistant Nozzle - 0.20mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube...

Micro Swiss MK10 Plated Wear-Resistant Nozzle - 0.30mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube...

Micro Swiss MK10 Plated Wear-Resistant Nozzle - 0.40mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube...

Micro Swiss MK10 Plated Wear-Resistant Nozzle - 0.50mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube...

Micro Swiss MK10 Plated Wear-Resistant Nozzle - 0.60mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube...

Micro Swiss MK10 Plated Wear-Resistant Nozzle - 0.80mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube...