INTAMSYS

Pack of 2 BuildTak PEI Sheets - 10x10  An ideal print surface for any 3D printer with a 10x10 print bed. Manufactured right here in the USA to ensure consistent quality and composition, the BuildTak Polyetherimide (PEI) build surfaces...

M3 Bed Leveling Nuts Sold in Pack of 2

FUNMAT HT Extruder Shroud/Cover Fits: FUNMAT HT

  INTAMSYS Electronics Cooling Fan This is the fan that goes in the bottom case of the FUNMAT HT to cool the electronics.

High Temp Heat Break Fan This is the OEM heatsink fan for the INTAMSYS FUNMAT HT V1. Also works for many other applications that require a 30x30x10 5v fan. 30x30x10mm DC 5 volt 1.3 Watts 85mm leads This fan will work on both the FUNMAT HT...

High Temp Heat Sink Fan for your INTAMSYS FUNMAT HT 3D Printer Replacement OEM fan for cooling the heat sink of the INTAMSYS FUNMAT HT High Temp 3D Printer. Note: this heat sink fan is version 2 (Blue plug) If your current fan has a black plug, it is...

Part Cooling Fan for the INTAMSYS FUNMAT HT - Version 1 This is the part cooling fan for the older style (black) V1 plug. Please check the color of the plug on your current fan. If it is black, this is the correct replacement fan.  

Part Cooling Fan for the INTAMSYS FUNMAT HT - Version 2 This is the part cooling fan for the new style (blue) V2 plug. Please check the color of the plug on your current fan. If it is blue, this is the correct replacement fan. 

Long lasting, durable fan mount for RepRap and E3D V6 style heat sink fan. This mount is machined out of aluminum to withstand heat and for longevity.  Fits:   E3D V6 RepRap V6 Style INTAMSYS FUNMAT HT  Please Note: This is...

Replacement filament extruder drive gear for the INTAMSYS FUNMAT HT.   

This is the filament guide tube that runs from the extruder down to the heatsink - the black mark on the tube indicates the end that should point up when installing. Fits: INTAMSYS FUNMAT HT

0.25mm brass nozzle for your INTAMSYS FUNMAT HT 3D Printer

0.60mm brass nozzle for your INTAMSYS FUNMAT HT 3D Printer

0.40mm CuCrZr brass nozzle for your INTAMSYS FUNMAT HT 3D Printer Precision ground in CuCrZr brass for the best performance.

0.60mm CuCrZr brass nozzle for your INTAMSYS FUNMAT HT 3D Printer Precision ground in CuCrZr brass for the best performance.

0.40mm stainless steel nozzle for your INTAMSYS FUNMAT HT 3D Printer

Replacement Fuse for INTAMSYS FUNMAT HT 3D Printer

10x10 glass build plate for the INTAMSYS FUNMAT HT

High temperature heat break for the INTAMSYS FUNMAT HT hot end.  

Low temperature heat break for standard filaments Fits: INTAMSYS FUNMAT HT 

Titanium Alloy Heat Break for RepRap V6 Hotend For 1.75mm diameter filament Fits: E3D V6 RepRap INTAMSYS FUNMAT  

Heater Cartridge for your INTAMSYS FUNMAT HT printer.  This heater cartridge is version 1. 

Heater Cartridge for your INTAMSYS FUNMAT HT printer.  This nozzle heater is version 2 with a green plug. 

Replacement high temperature heat block for your INTAMSYS FUNMAT HT 3D Printer  

High Temperature Hot End Kit for INTMASYS FUNMAT HT Printer Comes with a .40mm nozzle. Note: This is the V1 hot end kit with the the older style (single black) plug. Please check the color of the plug on your current hot end. If it is black, this is...

Hot End Adapter Plate for FUNMAT HT - V1 plugs This is the plate that connects your heater core, thermistor and fans to the FUNMAT HT wiring harness.  Look at your current plugs; if they are black, you have V1 plugs and this is the correct...

100 foot x 10 inch wide roll of Kapton tape for your INTMASYS FUNMAT HT printer

Replacement LED Light Strip for the INTAMSYS FUNMAT HT 3D Printer 3M Adhesive backing for easy installation.  

Low Temperature Hot End Kit for the INTMASYS FUNMAT HT - Version 1  This low temp hot end is for printing at standard temperatures and should not be used for high temp materials such as PEEK. Comes with a .40 nozzle. Note: This is the V.1 hot...

Replacement Micro Switch for your INTAMSYS FUNMAT HT 3D Printer Fits: FUNMAT HT V1

INTAMSYS FUNMAT HT Quick Fitting Push-Fit Connector Screws into the top of the heatsink and holds the filament guide tube in place. Note: If you are having trouble with the Bowden tube popping out, read this helpful...

Thermistor temperature sensor for your INTAMSYS FUNMAT HT printer