Parts, Accessories & Supplies

PB Select™ Hemera Compatible Titanium Heat Break (1.75mm) Incudes: Heat Break (1 pcs) Fits: Hemera Extruder Note:For 1.75mm filament onlyAfter changing hotend parts, a PID tune is recommended. 

E3D Hemera Heatsink Heatsink assembly for the E3D Hemera. Includes: Heatsink (1 pcs) Fits: E3D Hemera extruder

Hobbed Gear Hobbed gear with stainless steel teeth for Titan Extruder Fits: E3D Titan Extruder Please Note: This is an aftermarket hobbed gear. Click here if you want the OEM E3D hobbed gear

High Tamp PTFE Tube - Clear Includes: 3 meter PTFE tube (1 pcs) Inside diameter: 2mm (± .1mm) Outside Diameter: 4mm Color: Clear Max Temp: 260°c This premium high temperature PTFE tubing can withstand temperatures of up to 260°c. The...

  Micro-Swiss Wear-Resistant Nozzle with M6 Threads This M6 thread, Robo 3D style nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It...

SLS 12mm EZABL Mount For DDX Mount a 12mm EZABL bed leveling sensor onto the DDX Made of PA12 (Nylon) with the SLS 3D printing process Better surface finishing and higher working temperature resistance With square nut pockets for increased (re)threading...

X-TIP™ Nozzle (Nickel Plated, Copper Alloy with Hardened Steel Tip) Includes: Nozzle of selected size (1 pcs)OrTriple pack includes 3 nozzles - one each of 0.40mm, 0.60mm, 0.80mm  The X-Tip is a nickel plated copper alloy nozzle with a...

PTFE Fittings Set for Prusa Mini Use this set to simplify the install, use and maintenance of Prusa Mini’s bowden tube.Instead of using 3 PTFE tube sections, use one only.Includes push-fit collets for ease of use and effective hold of the...

SLS 18mm EZABL Mount For DDX Mount a 18mm EZABL bed leveling sensor onto the DDX Made of PA12 (Nylon) with the SLS 3D printing process Better surface finishing and higher working temperature resistance With square nut pockets for increased...

22mm Nema 17 Stepper Motor for Bondtech Extruder Nema17 Pancake stepper motor with a 41 cm non-detachable, bare end leads (no plug). Max Input current: 0.8A Step angle: 1.8 deg. Torque: 12 Ncm Outputshaft diameter: 5.0 mm with flat. Hole for...

CopperBlock™ MK8 Hot Block Nickel composite coated copper hot block for increased thermal conductivity. Allows for the use of a bead or 3mm cartridge style thermistor and is great for high temperature printing, up to 485c. Includes:Heater block...

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

24 Volt, 50 Watt Premium HT Heater Cartridge Includes: Heater (1 pcs)Extension cable (1 pcs) Specifications: 24 volt 50 watt500c max temperature1 meter lead22 mm long cartridgeDiameter to fit 6 mm H7 hole310SS cartridge improves longevity and...

  E3D Universal V6 1.75mm Heat Sink with Collet Designed to work with both Bowden and Direct Drive Hotends Includes:Heat sink for 1.75mm V6 Hotends (1 pcs)Collet with blue clip (1 pcs) Fits:E3D V6 HotendPrusa MK2/2.5/SPrusa MK3/S/S+

  Hobb-Goblin Drive Gear Inside Diameter: 8mm  For 3mm or 1.75mm filament diameter E3D filament drive gear made from premium stainless steel. Manufactured on a synchronised CNC process for a sharp, consistent, and clean cut tooth profile that...

MK8 Heat Break (Thermal Tube) Upgrade Made with TwinClad XT coated stainless steel. This Electroless Nickel composite coating is very low friction and used a lot in injection molding for its release properties. The TwinClad XT coating will help prevent...

Blinker Board - 3.5 amp Protects tool batteries from over discharge. Includes: Blinker Board (1 pcs) Compatible with: DeWalt, Milwaukee and Makita (12/18/20 volt Lithium Ion batteries.) Max Amps:  (if you need to power something...

DDX v2 Rear Housing For owners of DDX v1 units only This housing allows you to use a Micro Swiss all metal hotend in your DDX V1.SLS made part using Polyamide 12 (Nylon).

40x10 MagLev Fan by Sunon™  For cooling the hotend heatsink. A high quality long life fan. This fan is not quite as quiet as the Noctua fan, but provides almost twice the airflow. Note: This is ONLY a direct fit replacement for the...

Heater Block for Sensor Cartridges This Volcano Compatible heater block allows you to use E3D thermistor cartridges, as well as a high temperature, high accuracy PT100 temperature sensors. Compatible with E3D/RepRap heat break and Volcano nozzles...