SV06

Hotend Air Duct for SV06 Directs airflow to the part being printed Includes: Air duct (1 pcs) Fits: SV06

Bed Leveling Sensor Switch Includes: Sensor (1 pcs)Slide housing (1 pcs) Fits: SV06

Blower Fan This fan is used as the print cooling fan or the hotend heatsink cooling fan.  Includes: Fan (1 pcs) Specifications:Size: 40x40x10mmVoltage: 24vdc Fits: SV06 SV06 PlusSV07SV07 Plus Notes: Only one fan is...

Brass Nozzle Includes: Nozzle (1 pcs) Size: Select Above For: 1.75mm diameter filament Fits:Sovol SV01Sovol SV03Sovol SV04Sovol SV05Sovol SV06  

Build Plate Heater for SV06 Includes: Aluminum bed heater (1 pcs)Magnetic sheet - installed (1 pcs) Fits: SV06 Note: Does not include build plate/print surface or mounting hardware.

LCD Screen Cable (Flat Cable) Connects to LCD Screen. Includes: Flat Cable (1 pcs) Fits: SV06 

Drive Pulley for X or Y Axis Includes: Pulley (1 pcs)Set screw (2 pcs) Location: X or Y Motor Fits: SV06SV06 PlusSV07SV07 Plus

Extruder Adapter Board Includes: Extruder adapter board (1 pcs) Fits:SV06SV06 Plus

Extruder Assembly for SV06 Includes: Extruder assembly (1 pcs) Fits: SV06

Extruder Drive Gear This drive gear works as either the drive or driven gear. If you are replacing both drive gears, order two.  Includes: Drive gear (1 pcs) Fits: SV06SV06 PlusSV07SV07 Plus Note: Requires two M3x3 set...

Planetary Gear Set Includes: Planetary gear (3 pcs) Fits: SV06SV06 PlusSV07SV07 Plus Notes:Bearings not included. It is recommended to grease the gears. You can find grease here.  

Extruder Stepper Motor Includes: Stepper motor with gear (1 pcs) Fits: SV06SV06 PlusSV07SV07 Plus

Flexible Steel Build Plate - Textured Powder Coated PEI Includes: Build plate (1 pcs)Magnetic base (1 pcs) Size: 235x235mm  Fits: SV06SV05

Bi-Metal Heat Break Includes: Heat break (1 pcs) Fits:SV06SV06 Plus

Heater Block (Hot Block) Includes: Heater block (1 pcs) Fits: SV06 Note: Does not include any installation hardware.

Hotend Heater Cartridge Heats the hotend Includes: Heater (1 pcs) Fits:SV06SV06 PlusSV07SV07 Plus

Hotend Assembly for SV06 Includes: Heat break (1 pcs)Heater block (1 pcs)Heater cartridge (1 pcs)Thermistor (1 pcs)Silicone sock (1 pcs)M2.5x3 socket head cap screw (2 pcs)0.40mm nozzle (1 pcs) Fits: SV06

LCD Control Screen for SV06 Includes: LCD screen (1 pcs) Fits: SV06

Mainboard (Motherboard) for Sovol SV06 This is the upgraded silent mainboard. Comes with firmware loaded. Includes: Mainboard (1 pcs) Fits: SV06

Power Supply Unit Includes: Power supply unit (1 pcs) Fits: SV06 Specifications:Input voltage: 115/230V ACOutput voltage: 24V DCOutput amps: 15 (max)  ATTENTION  These power supplies have a switch on the side to select...