Tools & Supplies

Molex Terminal Block Plug 5.08mm 2 position 15 ampWire Entry: Right Angle Includes: Plug (1 pcs)

Terminal Block Plug 5.08mm Includes: Plug (1 pcs) Specs:2 position20 ampSafety approval:  Shade of green may be different than photo

Terminal Block Plug 5.08mm Includes: Plug (1 pcs) Specs:4 position15 amp

4 Position Vertical Terminal Block Header Includes: Header (1 pcs) Amps: 12Pitch: 5.08mm

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

GD900 Thermal Grease Size: 1 gram Max working temp: 200c This thermal grease can be used on the cold-end side of the heat break to help dissipate heat to the heatsink. Do not use on the hotend side. For the hotend side, including the heater and...

Bondtech M3 Thread Insert  Sold in units of 1 Thread size: M3 Insert Length: 5.2mm Recommended hole diameter: 4mm For easy installation use the Heat-Set Insert Soldering Iron Tips

Bondtech M4 Thread Insert  Sold in units of 1 Thread size: M4 Insert length: 5.5mm  Recommended hole diameter: 5.6mm For easy installation use the Heat-Set Insert Soldering Iron Tips

Bondtech M5 Thread Insert Sold in units of 1. Thread Size: M5  Insert length: 6.6mm Recommended hole diameter: 6.2mm For easy installation use the Heat-Set Insert Soldering Iron Tips

Vibra-Tite Blue Threadlocker  This is a good medium strength thread locker for securing 6mm (or larger) fasteners. For smaller fasteners use purple threadlocker. Includes: 1.8ml Threadlocker (1 pcs) Note: Not intended for use in the hotend...

Vibra-Tite Purple Threadlocker This is a good low strength thread locker for securing small screws on your 3D printer. Includes: 1.8ml threadlocker (1 pcs) Note: Not intended for use in the hotend  Strength: LowColor: PurpleSize: 1.8...

Torx Driver Includes: Torx driver (1 pcs) Size: T6Shaft Length: 3 inchesOverall Length: 6 Inches Fits: Set screws in Nextruder heater block

Torx Driver Includes: Torx driver (1 pcs) Size: T8Shaft Length: 3 inchesOverall Length: 6 Inches Fits: Torx screw holding hall sensor to heatsink.