Adventurer 5M & 5M Pro

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

Build Plate Heater Includes: Heater (1 pc)Magnet - Installed (1 pc) Fits: Adventure 5MAdventure 5M ProRobo E4

  Cable for Chamber Camera Includes: Cable (1 pcs) Fits: Adventurer 5M Pro

Flashforge Build Chamber Camera Includes: Camera (1 pcs)Mounting screw (1 pcs) Fits: Adventurer 5M ProRobo E4

  Extruder Assembly Includes: Extruder (1 pcs)0.40mm nozzle (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4

  Extruder Mechanism - Filament Feeder This part contains the gears that drive the filament. It is also called a filament feeder or drive gear box.  Includes: Extruder Mechanism (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4 Note:...

  Extruder Adapter (PCB Board) Includes: PCB Board (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4  

  Flashforge Filament Guide Tube (PTFE) Runs inside the cable guide chain from the filament spool to print head.  Includes: Guide tube (1 pcs)  Fits: Adventurer 5M ProRobo E4

  Flashforge Filament Guide Tube (PTFE) Runs from filament spool to print head.  Includes: Guide tube (1 pcs)  Fits: Adventurer 5M

Filament Runout Sensor Includes: Filament Sensor (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4

  Flashforge FFC Flat Cable for Build Plate Heater Runs from heated build plate to mainboard. Includes: FFC Cable (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4 Note: This is the wider heating cable, not the narrow thermistor...

  Flat Cable for Flashforge TFT Touch Screen Runs from touch screen to mainboard Includes: Cable (1 pcs) Fits: Adventurer 5MAdventurer 5M Pro  WARNING  Pay attention to the orientation of your current cable.Plugging...

  Flexible Build Plate for PC/ABS/ASA  Flexible build plate with a smooth print surface. Good for printing Polycarbonate, ABS, ABS Blends and ASA. Includes: Build plate (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4 Note: For...

  Flexible Build Plate with Smooth PEI Smooth PEI printing surface on one side. Includes: Flexible build plate (1 pcs)PEI print surface - pre-installed (1 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

  Replacement Air Filter Set Includes: Air filter (2 pcs) Fits:Adventurer 5MAdventurer 5M ProRobo E4

  Flashforge Leadscrew Nut Includes: Leadscrew nut (1 pcs) Fits:Adventurer 5MAdventurer 5M Pro

Please read our returns policy regarding electronic items Flashforge Mainboard Includes: Mainboard (1 pcs) Fits: Adventurer 5M Pro

Please read our returns policy regarding electronic items Flashforge Mainboard Includes: Mainboard (1 pcs) Fits: Adventurer 5M (Does not fit 5M PRO)

Nozzle Assembly for Adventurer 5M and Adventurer 5M Pro  Includes: Nozzle of selected size (1 pcs)*Quad pack includes four nozzles (one of each size) Fits: Adventurer 5MAdventurer 5M ProRobo E4 

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

  Flashforge TFT Touch Screen Includes: Touch Screen (1 pcs) Fits: Adventurer 5M ProRobo E4

  Flashforge TFT Touch Screen Includes: Touch Screen (1 pcs) Fits: Adventurer 5M

Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

  VOC Sensor Assembly Includes: Sensor (1 pcs) Fits: Adventurer 5M ProRobo E4

  Flashforge Z Axis Leadscrew Includes: leadscrew (1 pcs) Fits: Adventurer 5MAdventurer 5M Pro Note: Does not include leadscrew nut