Name: Cable for Thermistor - R1/+ | Robo 3D
Brand: Robo 3D
SKU: R1-CBL-THERM
Price: 3.95 USD
Availability: InStock

Cable for Thermistor - R1/+ | Robo 3D

SKU:

R1-CBL-THERM

Condition:

New

Description
Additional Information

Description

R1+ Thermistor Cable (wire)

Runs from mainboard to thermistor.
Will also work for the heatsink fan or print cooling fan but pay attention to the orientation of the plug (at the mainboard) so the fan does not run backwards.

Includes: Cable (1 pcs)

Fits:
Robo R1
Robo R1+

View AllClose

Additional Information

PSC:	Cables & Parts (Wiring & Connectors)
Brand Name:	Robo 3D

View AllClose

Thermistor - R2, C2 | Robo 3D

Robo 3D

$13.95

Robo Thermistor Includes: Thermistor (1 pcs) Fits:Robo R2Robo C2

Thermistor - R1/+ | Robo 3D

PB Select™

$12.95

R1+ Thermistor Robo 3D R1+ replacement thermistor Includes: Thermistor (1 pcs) Fits:Robo R1Robo R1+

Bed Connection Cable - R1+ | Robo 3D

Robo 3D

$12.95

Robo R1+ Heated Bed Connection Cable You will need this extension cable if you are upgrading from a v1 bed (with a long cable) to the v2 bed (which has a short cable). Buy the...

Y Belt Clamp (2 Pack) - R1/+ | Robo 3D

Robo 3D

$9.95

Robo R1+ Y Belt Clamp - 2 Pack Includes: Belt clamp (2 pcs) Location: Y belt Fits:Robo R1

Fan for Bottom Cover - R1/+ | Robo 3D

Robo 3D

$8.95

Robo R1+ Bottom Cover Fan for Cooling Electronics This is the fan that cools the Arduino and RAMPs board in the bottom of the printer Includes: Fan (1 pcs) Amps: 0.08

Thermistor - R1/+ | Robo 3D

PB Select™

$12.95

R1+ Thermistor Robo 3D R1+ replacement thermistor Includes: Thermistor (1 pcs) Fits:Robo R1Robo R1+

Bare Hotend - R1/+, R2, C2 | Robo 3D

Robo 3D

$21.95

Robo Hexagon Hot End (Bare Unit) For 1.75mm filament Includes:Heatsink (1 pcs)Heat break (1 pcs)Heater block with set screws (1 pcs)0.40mm brass Nozzle (1 pcs) Fits: Robo R1Robo R1+Robo...

Nozzle Coat™ for 3D Printing — Add to Cart

Nozzle Coat™ | 4ml

PB Select™

$14.99

Nozzle Coat™ Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the...

Clamp for R1 Bed Magnet Installation - 4 Pack

PB Select™

$6.95

Robo R1/+ Bed Installation Clamps Small clamps to assist with the installation of bed magnets on the R1+ bed. These are 4 inch clamps with an opening of about 2 inches...

Fan for Print (Part) Cooling - R1/+ | Robo 3D

Robo 3D

$8.95

Robo R1+ Print Cooling Fan This is the fan that cools the part being printed. Includes: Fan (1 pcs) Amps: 0.08 Fits:Robo R1Robo R1+ Note: The color of the plug may differ from the photo...

Fan for Bottom Cover - R1/+ | Robo 3D

Robo 3D

$8.95

Robo R1+ Bottom Cover Fan for Cooling Electronics This is the fan that cools the Arduino and RAMPs board in the bottom of the printer Includes: Fan (1 pcs) Amps: 0.08 Fits:Robo R1Robo...

Cable for Thermistor - R1/+ | Robo 3D

Description

R1+ Thermistor Cable (wire)

Additional Information

Related Products