Clearance

*Clearance item, no returns 128x64 Full Graphic LCD Smart Controller - RepRap RAMPS Compatible  BLEMISHED  These screens have minor cosmetic imperfections but are still fully functional. The 128x64 Full Graphic LCD Smart Controller is a...

*Clearance item, no returns 12V Dual Ball Bearing 25mm Fan 25x25x10mm12 volt3.64 CFMMolex Micro-Fit 3.0 style connector2 bolts included - mount directly to your Slice Mosquito or Mosquito Magnum hotend Fits: Slice Mosquito Hotend  

*Clearance item - no returns 3010 Axial Fan (12V) Includes: Fan (1 pcs) Specs:Voltage:12VDCWire Length: 80mmSize: 30x30x10mmBearing: Dual Ball 

*Clearance item, no returns 5015 Blower Fan 12 VDC These fans have a short 75mm wire with Dupont connector. Includes: 12 volt Fan (1 pcs) Specifications:Bearing: Dual ball bearingDimensions: 51.5 x 51.5 x 15 mmInput: DC 12VCurrent: 0.14...

*Clearance item - no returns ATC Semitec 104GT-2 Thermistor Cartridge  Max temp: 280c Cartridge: 3x15 Cable Length: 970mm overall Please note: Bare ends, no connectors included  

  *Clearance item, no returns   Bondtech PC2510 to JST-XH6 Cable PC2510 4-pin connector to JST-XH6 6-pin connector. This cable is by default wired for the Bondtech 40mm geared Nema17 motor. Please make sure that it follows the schematics...

*Clearance item, no returns Bondtech JST-XH4 Cable JST-XH4 4-pin connector to JST-XH6 6-pin connector. This cable is by default wired for the Bondtech 40mm geared Nema17 motor. Please make sure that it follows the schematics for your application...

*Clearance item, no returns DDX Adapter for Mosquito To use with Bondtech DDX Direct Drive eXtruder for Creality This set is necessary to install a Slice Engineering's Mosquito hotend in a DDX Upgrade kit. Important Notes from...

*Clearance item, no returns 4x22mm hardened and precision ground shaft for Bondtech gear kits.  Sold in units of one

*Clearance item - no returns  Extension Cable, Stepper Motor PH to Dupont 4 (No Latch). Approximately 2 meter longNema 17 stepper motor 6-pin PH connector to Dupont 4-pin connector. The default wiring for this extension cable is listed...

*Clearance item, no returns Cable - Stepper Motor PH to XH2.54 - 4 pin | 2 meter Approximately 2 meter longNema 17 stepper motor 6-pin connector to XH2.54 4-pin connector The default wiring for this extension cable is listed below. You may...

*Clearance item - no returns   BLTouch Cable SM-125 Cable for the BLTouch bed sensor. Includes: Cable (1 pcs) Length: 1 meter Connectors:Side A: PicoBlade 5 pinSide B: PicoBlade 5 pin Number of wires: 5 Note: This is a universal...

 *Clearance Item - no returns Connector Cable for PB Select heater cartridge.  Includes: Cable (1 pcs) Length: 865mm Note: the connector on this cable has side tabs for installing in a housing (see picture), however the tabs are not needed...

 *Clearance item - no returns Revo™ CR - with Fully Loaded Nozzle Kit Voltage: 12 volt  Nozzle Sizes: 0.25, 0.40, 0.60 and 0.80mm  (one of each size) Revo CR is a drop-in upgrade for some of the most popular...

*Clearance item, no returns Revo™ Hemera Upgrade Kit (with fully loaded nozzle kit) Voltage: 12 volt  Nozzle Size: 0.25, 0.40, 0.60, 0.80 (1 each)  This kit includes a Hemera heatsink with a revised design...

   *Clearance item - no returns Revo™ Six - with Fully Loaded Nozzle Kit Voltage:  12 volt  Nozzle Sizes:  0.25, 0.40, 0.60 and 0.80mm  (one of each size) The Revo Six is a drop-in replacement for...

*Clearance item - no returns E3D Roto Extruder with Sensor Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market. The sensor adds...

*Clearance item - no returns E3D Roto Extruder Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.  WARNING Roto isn't...

2 Meter Cable for Revo HeaterCore Heater Line  Length: 2 Meter (+/- 1cm) Fits: E3D Revo 24v HeaterCore Note: Photo for representation purposes only and may not match product exactly.

*Clearance item - no returns Long lasting, durable fan mount for RepRap and E3D V6 style heat sink fan. This mount is machined out of aluminum to withstand heat and for longevity.  Includes: Fan mount bracket (1 pcs) Fits: E3D V6RepRap V6...