CORE One

PB Select™ Nylon Spacer for Prusa Nextruder This is the spacer the seats into the Nextruder PG cover on the below listed printers.  Includes: Spacer (1 pcs) Size: 13x24x2,5mmFits: Prusa MK3.9Prusa MK4Prusa XL

9mm SAC-1 Stainless-Steel Graphics Knife with 30-Degree Precision Blade High-quality precisely made stainless steel precision knife with an acute 30° snap angle for enhanced cutting control. Each blade offers seven cutting segments per blade...

Replacement Blades for the Olfa SAC-1 Precision Knife  High-quality precisely made stainless steel 9 mm blades with an acute 30° snap angle for enhanced cutting control. Each blade offers seven cutting segments per blade...

PG Assembly Adapter This tool printed from high quality PETG. It ensures that the gearbox is correctly aligned during the assembly or after a service. Includes: PG Assembly Adapter (1 pcs) Details: Version of this replacement: E1Required...

Planetary Gear Assembly & Planetary Gear Ring (PG Assembly + PG Ring) Includes:PG ring (1 pc)PG assembly (1 pc)  CAUTION:  Please replace both parts in your Nextruder, as it may not work properly if you replace one part...

  Prusa Brass Nozzle Brush Prusa Brass Nozzle Brush is optimized for 3D printing with its short and dense bristles. Includes: Brush (1 pcs) Made in EU with locally sourced beech wood.

PB Select™ Nextruder Hotend Screw Kit Includes:Set Screw (5 pcs)Pan Head Screw (2 pcs)T6 Torx WrenchT8 Torx Wrench Specs:Set Screw: M3x4mm, T6 torx headFor fastening thermistors and heater cartridge Pan Head: M2.5x6mm, T8 torx headFor fastening...

Screwdriver PH2 Screwdriver with a PH2 head. PH2 is the recommended standard for the screws used on Original Prusa Printers. Includes: Screwdriver (1 pcs) Specifications:Red Hand: PlasticScrewdriver length L1: 160 mmShank length...

M3x4 Set Screw (Grub Screw) Includes: Set screw (5 pcs) Size: M3x4mmGrade: 12.9Head Type: Hex Fits heater block of:E3D V6Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL Note: These are hex head set screws, not torx head (torx head is...

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

M4X4 Set Screw  12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)

PB Select™ Silicone Sock Includes: Silicone sock (2 pcs) Color: BlackMax temperature: 280°c Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL

Smooth Rod 10x325mm (Z Axis) Includes: Smooth Rod 10X325 mm (1 pcs) Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4.5 To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder Hotend not included This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...