CORE One

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

  Basics of 3D Printing with Josef Prusa   English Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d...

  Basics of 3D Printing with Josef Prusa   Spanish Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d.com...

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

Clear Gearbox Cover for Prusa Nextruder This version has no text on the front. Includes: Acrylic Cover (1 pcs) Fits: Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please consult the...

Genuine E3D ObXidian™ High Flow Prusa Nozzles E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere. This improves the overall reliability...

E3D Prusa Nozzle: High Flow Brass Genuine E3D Prusa Nozzles feature an all-metal filament guide, ensuring that the entire path of the filament through the Nextruder is all-metal, no PTFE tubes anywhere. This improves the overall reliability of the...

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Prusa MK4 Heater Cartridge (Hotend Heater) Includes: Heater (1 pcs)M3x4 grub screw (2 pcs)  Specifications:Voltage: 24VWattage: 40WLead Length: 120 mm Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this...

PB Select™ Heater Cartridge (Hotend Heater) for Prusa XL, MK3.9 and MK4 Includes:Heater (1 pcs)Set screw with T6 Torx Head (2 pcs) Specifications:Voltage: 24VWattage: 40WLength: 120mm Fits: Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa...

PB Select™ Heater Block (Hot Block) for MK4/XL Includes:Heater block (1 pcs)M3x4 grub screw with T6 torx head (3 pcs)  Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please consult the...

PB Select™ Nextruder Heater Block - Plated Copper This Nextruder heater block is made from nickel-plated copper. It's fully compatible with the original hotend. Includes: Copper heater block (1 pc)M3x4 grub screw with T6 torx head...

Needle File Set  Files with different profiles: flat, square, triangular, lenticular, semicircular, roundmade of GCr15 bearing steel Includes: Files (6 pcs)

Nextruder Nozzle (choose size above) All-metal high-precision nozzle for the Nextruder combines both nozzle and heat break into one unit for leak free printing. Includes: Nozzle (1 pcs) Fits:CORE OneMK3.9MK3.9SMK4MK4SXL For the new generation of...

Prusa Nextruder Heater Block Includes: Heater block (1 pcs)M3x4 grub screw (3 pcs) Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

Nextruder Hotend Assembly with 0.40mm Brass Nozzle Fully assembled hotend for the Nextruder Nozzle Size: 0.40mm  Includes:0.40mm Prusa Brass Nozzle* (1pcs)Heaterblock (1pcs)Heater 40 W - 120 mm (1pcs)Thermistor NTC 100k - 115 mm...

E3D Prusa Nextruder Nozzle Orifice Size:  Choose size above Type: BrassFilament Size: 1.75mm Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL

E3D Obxidian Nozzle for Prusa Nextruder (choose size above) Made from hardened steel with a corrosion-resistant coating, ensuring exceptional durability and longevity. These nozzles are particularly suitable for printing...

We recommend the E3D Nextruder Obxidian Nozzle. Original Prusa Nextruder Obxidian Nozzle Made from hardened steel with a corrosion-resistant coating, ensuring exceptional durability and longevity. These nozzles are particularly...

E3D Nextruder V6 Nozzle Adapter This adapter makes your Nextruder compatible with any V6 nozzle. You can use it with the Original Prusa XL and MK4 Includes: Adapter (1 pcs) Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa...

Nextruder V6 Nozzle Adapter This adapter makes your Nextruder compatible with any V6 nozzle. You can use it with the Original Prusa XL, MK3.9, MK4 and CORE One Includes: Adapter (1 pcs) Fits:CORE OneMK3.9MK3.9SMK4MK4SXL Note: Nozzle not...

Nozzle Cleaning Needle 0.3mm Diameter Includes: needle (5 pcs)  

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Planetary Gear Assembly & Planetary Gear Ring (PG Assembly + PG Ring) Includes:PG ring (1 pc)PG assembly (1 pc)  CAUTION:  Please replace both parts in your Nextruder, as it may not work properly if you replace one part...

  Prusa Brass Nozzle Brush Prusa Brass Nozzle Brush is optimized for 3D printing with its short and dense bristles. Includes: Brush (1 pcs) Made in EU with locally sourced beech wood.

Screwdriver PH2 Screwdriver with a PH2 head. PH2 is the recommended standard for the screws used on Original Prusa Printers. Includes: Screwdriver (1 pcs) Specifications:Red Hand: PlasticScrewdriver length L1: 160 mmShank length...

M3x4 Set Screw (Grub Screw) Includes: Set screw (5 pcs) Size: M3x4mmGrade: 12.9Head Type: Hex Fits heater block of:E3D V6Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL Note: These are hex head set screws, not torx head (torx head is...

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL

PB Select™ Silicone Sock Includes: Silicone sock (2 pcs) Color: BlackMax temperature: 280°c Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder Hotend not included This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Double-sided Powder-coated PP Spring Steel Sheet Includes: Spring steel sheet (1 pcs) This print sheet is specially designed to print polypropylene-based filaments, especially the Prusament PP Carbon Fiber Black. The PP-type...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

Prusa Nextruder Hotend Thermistor  These are the 115mm version that fit both the MK4 and XL. Includes:Thermistor NTC 100k - 115 mm (1 pc)Grub screw M3x4 (1 pc) Fits: Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To...

PB Select™ Thermistor for Prusa MK3.9, MK4 and XL 3D printers Includes:Thermistor (1 pcs)Set screw (1 pcs) Length: 115mm Fits: Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please consult the...

Prusa Thumb Screw M4x8 Includes: Thumb screw (1 pcs) Fits: Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4S To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...