CORE One

PA-Nylon Powder-coated Print Sheet for Prusa CORE One Includes: Print sheet (1 pcs) This print sheet is specially designed to print polyamide-based filaments, especially the Prusament PA11 Carbon Fiber Black. The PA11-type...

Double-sided Powder-coated PP Spring Steel Sheet for Prusa CORE One Includes: Print sheet (1 pcs) This print sheet is specially designed to print polypropylene-based filaments, especially the Prusament PP Carbon Fiber Black. The...

  Prusa Brass Nozzle Brush Prusa Brass Nozzle Brush is optimized for 3D printing with its short and dense bristles. Note: Please expect the bristles to bend during shipping, storage and usage; this is typical for brass brushes...

Prusa CORE One Maintenance Kit A convenient set of spare parts and extra fasteners for maintenance and easy repairs of the Prusa CORE One printer. Includes: Set of pre-lubricated bearings LM8UU (2 pcs )Set of pre-lubricated bearings for CoreXY...

3D Print Cleanup Tool - RB1000 Deburring Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as...

Prusa CORE One RGB LED strip (166 mm) A Replacement LED strip for the CORE One printer Includes: LED strip (1 pc) LED Length: 166 mm Fits: CORE One To correctly install this replacement part, visit help.prusa3d...

PB Select™ Nextruder Hotend Screw Kit Includes:Set Screw (5 pcs)Pan Head Screw (2 pcs)T6 Torx WrenchT8 Torx Wrench Specs:Set Screw: M3x4mm, T6 torx headFor fastening thermistors and heater cartridge Pan Head: M2.5x6mm, T8 torx headFor fastening...

Screwdriver PH2 Screwdriver with a PH2 head. PH2 is the recommended standard for the screws used on Original Prusa Printers. Includes: Screwdriver (1 pcs) Specifications:Red Hand: PlasticScrewdriver length L1: 160 mmShank length...

M3x4 Set Screw (Grub Screw) Includes: Set screw (5 pcs) Size: M3x4mmGrade: 12.9Head Type: Hex Fits heater block of:E3D V6Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL Note: These are hex head set screws, not torx head (torx head is...

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

M4X4 Set Screw  12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)

PB Select™ Silicone Sock Includes: Silicone sock (2 pcs) Color: BlackMax temperature: 280°c Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL

Smooth Rod 10x325mm (Z Axis) Includes: Smooth Rod 10X325 mm (1 pcs) Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4.5 To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder Hotend not included This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...

Sock-X for Prusa Nextruder This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Nextruder hotend.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...