CORE One

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs) Length: 175mmBlade width: 39mm

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

Clear Gearbox Cover for Prusa Nextruder This version has no text on the front. Includes: Acrylic Cover (1 pcs) Fits: Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL Note: Nylon spacer is recommended. If your current cover...

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

Torx Wrench Size: T6 Includes: Torx wrench (1 pcs) Fits: Set screws in Nextruder heater block

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

PB Select™ Heater Cartridge (Hotend Heater) for Prusa XL, MK3.9 and MK4 Includes:Heater (1 pcs)Set screw with T6 Torx Head (2 pcs) Specifications:Voltage: 24VWattage: 40WLength: 120mm Fits: Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa...

PB Select™ Heater Block (Hot Block) for MK4/XL Includes:Heater block (1 pcs)M3x4 grub screw with T6 torx head (3 pcs)  Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please visit the Prusa...

PB Select™ Nextruder Heater Block - Plated Copper This Nextruder heater block is made of nickel-plated copper. It's fully compatible with the Original Prusa Nextruder hotend. Includes: Copper heater block (1 pc)M3x4 grub screw with...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

PB Select™ Nylon Spacer for Prusa Nextruder This is the spacer the seats into the Nextruder PG cover on the below listed printers.  Includes: Spacer (1 pcs) Size: 13x24x2,5mmFits: Prusa MK3.9Prusa MK4Prusa XL

PB Select™ Nextruder Hotend Screw Kit Includes:Set Screw (5 pcs)Pan Head Screw (2 pcs)T6 Torx WrenchT8 Torx Wrench Specs:Set Screw: M3x4mm, T6 torx headFor fastening thermistors and heater cartridge Pan Head: M2.5x6mm, T8 torx headFor fastening...

M3x4 Set Screw (Grub Screw) Includes: Set screw (5 pcs) Size: M3x4mmGrade: 12.9Head Type: Hex Fits heater block of:E3D V6Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL Note: These are hex head set screws, not torx head (torx head is...

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

M4X4 Set Screw  12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)

PB Select™ Silicone Sock Includes: Silicone sock (2 pcs) Color: BlackMax temperature: 280°c Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...