Description
Bambu Lab High Flow Hotend for the H2 Series and P2S
The Bambu High Flow Nozzles optimized melt zone enables increased volumetric speed, achieving up to 62.5%1 higher max volumetric speed and reducing print time by up to 30%2. The larger your model, the more time you save—especially for prints with extensive infills.
1. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280℃ nozzle temperature, spiral vase mode on.
2. Tested with PLA Basic, 15% infill, 300x300x300mm cube.
Includes: High Flow Hotend (1 pcs)
Fits:
Bambu Lab H2 series
Bambu Lab P2S
Bambu Lab A1 Series**
**Bambu High Flow Nozzle is compatible with A1 Series, but it will not improve volumetric speed. In other words, the High Flow Nozzle performs the same as a standard nozzle on the A1 Series.
Learn more about replacing the Hotend for H2 Series and P2S on Bambu Lab Wiki.
Filament Compatibility:
Learn more about filament compatibility here.
| Material | 0.4 mm Nozzle | 0.6 mm Nozzle | 0.8 mm Nozzle | Hardened Steel Required? |
| General PLA | YES | YES | YES | Optional |
| PLA Sparkle | YES | YES | YES | Optional |
| PLA Marble | YES | YES | YES | Optional |
| Wood/Rock/Metal-filled PLA | YES | YES | YES | Optional |
| PETG | YES | YES | YES | Optional |
| PVA | YES | YES | YES | Optional |
| ABS | YES | YES | YES | Optional |
| ASA | YES | YES | YES | Optional |
| PC | YES | YES | YES | Optional |
| PA | YES | YES | YES | Optional |
| TPU | YES | YES | YES | Optional |
| Bambu PLA-CF | Not recommended | YES | YES | *Required |
| Bambu PETG-CF | Not recommended | YES | YES | *Required |
| Bambu PAHT-CF | Not recommended | YES | YES | *Required |
| Bambu PET-CF | YES (Only for left hotend) | YES (Only for left hotend) | YES (Only for left hotend) | *Required |
| CF/GF Filaments from other brands | Not Recommended | YES | YES | *Required |
Additional Information
Category Filter: |
Extruder & Hotend Parts (Print Head) |
Category Filter: |
Nozzles |
Brand Name: |
Bambu Lab |
Fits: |
Bambu Lab |
