Magigoo Supergrip (PLA/ABS/ASA/PETG/TPU) for Flexplates | 50ml

Magigoo 3D Printing Adhesive

Magigoo Supergrip is a new Magigoo adhesive specifically formulated for use with Flexible plates and other polymeric based plates. It works with most commonly used materials such as PLA, PET-G, ABS/ASA, TPU and others, and offers easy application, release upon cooling, and water-based cleaning.

Size: 50ml 

Includes: Magigoo supergrip (1 bottle)

Works with:
ABS
PLA
PETG
ASA
TPU

 WARNING  Do not squeeze the bottle to avoid applicator popping off.

Application:
Shake the bottle.
Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
Print according to the filament/printer manufacturers recommendations.

Print Removal:
The part should self-release or become easier to remove on cooling, in most cases the part can be directly lifted off from the
plate.
If the part cannot be easily removed by hand, a part removal tool can be used to gently lift the part off the build-plate.
When using a brim, it is advisable to first peel off the brim around the part and then attempt to remove the print. 

Cleaning:
Use a damp cloth to wipe off all the goo residues until a clean surface is visible.
To avoid cross contamination between adhesives we recommend wiping the glass build-plate once more after rinsing the cleaning cloth with water.
Only use water to clean off Magigoo residues, other solvents will not work as well as water or at all!

Magigoo Manual - This manual has some great info on bed adhesion.