Description

Nema 17 Geared Stepper Motor for Bondtech Extruders

Nema17 geared stepper with 5.18:1 ratio and a planetary gear reducer and a 700 mm long PC2510 cable with quick-fit connectors (see additional cable sizes available in Related Products below)

For best performance it should be driven with 24V, please adjust your stepper driver to output max 1.2A

Weight: 406g
Max Input current: 1.2A
Step angle: 1.8 deg.
Gear ratio: 5.18:1
Outputshaft diameter: 8.0 mm
Hole circle for mounting: 28 mm, 4xM3
Motor length: 40mm

View AllClose

Additional Information

Category:

Bondtech Parts

View AllClose

LGX™ Pancake Stepper Motor w/ Motor Gear | Bondtech

Bondtech

Price: $24.95

Bondtech LGX™ Pancake 25mm Stepper Motor with Motor Gear To replace the 25mm pancake stepper motor and motor gear on a Bondtech LGX™ Large Gears eXtruder. Includes:Stepper Motor (1...

Cable - Stepper Motor to PC2510 | Bondtech

Bondtech

Price: $3.99

Bondtech PC2510 to JST-XH6 Cable PC2510 4-pin connector to JST-XH6 6-pin connector. This cable is by default wired for the Bondtech 40mm geared Nema17 motor. Please make sure that it follows

Nema17 Pancake Stepper Motor - 22mm | Bondtech

Bondtech

Price: $13.99

22mm Nema 17 Stepper Motor for Bondtech Extruder Nema17 Pancake stepper motor with a 41 cm non-detachable, bare end leads (no plug). Max Input current: 0.8A Step angle: 1.8 deg.

Cable - Stepper Motor to JST-XH4 | Bondtech

Bondtech

Price: $2.99

Bondtech JST-XH4 Cable JST-XH4 4-pin connector to JST-XH6 6-pin connector. This cable is by default wired for the Bondtech 40mm geared Nema17 motor. Please make sure that it follows the schem

Motor Gear for BMG Extruder | Bondtech

Bondtech

Price: $8.50

Bondtech Motor Gear for BMG Extruder 17 tooth brass gear with M3x3 set screw. Used in Bondtech BMG single and dual direct extruders. Note: Make sure that the set screw does not collide with the...

LGX™ Primary Gear | Bondtech

Bondtech

Price: $5.95

Bondtech LGX™ Primary Gear Made of self lubricant high temperature plastic to replace a primary gear on a